Used Unscrambler for sale (32)

Year of construction: 2021, condition: used, machine/vehicle number: AT95, Used Posimat bottle unscrambler - year 2021Technical Specifications & Performance DataThis Bottle Unscrambler POSIFLEX-A-20 is a proven solution for high-efficiency bottle handling at the start of a used bottling line. Manufactured by Posimat, it is engineered to orient and feed empty bottles reliably into downstream industrial packaging equipment, supporting beverage production environments that demand consistent uptime and gentle container treatment.Manufacturer: PosimatModel/Type: POSIFLEX-A-20Manufacturing year: 2021Production speed: up to 100 bpm (bottles per minute)Application: Automatic bottle unscrambling and infeed to conveyorsCompliance: CE marked; designed according to 2006/42/CE (Machinery), 2014/30/CE (EMC), 2014/35/CE (Low Voltage)Container handling: Optimized for bottle feeding in beverage production linesUse case: Ideal for second hand installations and upgrades of existing used bottling line layoutsAdvanced Automation & Control SystemsThe POSIFLEX-A-20 is built for automated operation with coordinated control of the hopper, orienting system, and discharge. Operators benefit from intuitive control interfaces and precise speed regulation to match downstream equipment, improving changeover efficiency and minimizing stops.Integrated control panel for speed and function managementAutomated bottle orientation with high repeatabilitySensor-based jam detection and bottle flow monitoringRecipe-friendly setup for rapid format adjustmentDesigned for continuous-duty operation in industrial packaging environmentsProduction Line Integration CapabilitiesThis unscrambler integrates seamlessly at the head of a beverage production line, feeding containers to air or tabletop conveyors leading to rinsing, filling, capping, and labeling machines. It supports standalone or inline operation and can be configured to accommodate a wide range of bottle sizes.Compatible with standard conveyor interfacesFlexible layout options for compact or extended linesFormat change capability for different bottle heights and diametersSuitable for integration into water, juice, wine, beer, and general beverage production processesMachine Condition & Maintenance HistoryBuilt in 2021, this second hand unit presents a modern design life and is offered in ready-for-operation condition. Its contemporary engineering and CE-compliant construction make it a strong candidate for facilities seeking to expand or modernize their used bottling line with minimal risk and reduced commissioning time.Operational Performance & VersatilityEngineered for stable performance at up to 100 bpm, the POSIFLEX-A-20 provides gentle bottle handling, consistent orientation, and smooth discharge to conveyors. This enhances downstream efficiency by reducing starved or blocked infeed conditions at rinsers, fillers, and labelers, improving overall line OEE.Gentle handling for lightweight bottlesConsistent bottle orient... Cedpe Adt Nuofx Ak Ajri

Year of construction: 1995, condition: good (used), functionality: fully functional, For sale is a bottle erecting machine made by Engler including a stainless steel bottle bunker. There are also various format parts and a blower. The machine is currently not in use and can be viewed by arrangement at the production site in Thuringia. Csdetmqafopfx Ak Asri Formats: 300ml, 400ml, 500ml, 875ml for PE or PET bottles. Diameter: 2.10m; Outlet height: approx. 0.98m; Bunker height: 1.12m to 1.75m

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1639 4186, type of input current: three-phase, input voltage: 230 V, total width: 1,500 mm, total length: 2,700 mm, total height: 1,900 mm, overall weight: 900 kg, Equipment: compressed air system, documentation/manual, For Sale: Flexicon FMB210 Filling & Capping Machine with BU12 Bottle Unscrambler – 2017 Crjdpfoz Szupox Ak Aoi Manufacturer: Flexicon / Watson-Marlow Model: FMB210 + BU12 Year of Purchase: 2017 Condition: Fully operational Bottles Produced: 3.4 million Application: 10ML and 30ML E-liquid production (subject to modification). Machines sold by Flexicon are typically designed for the pharmaceutical industry. - Equipment Overview A well-maintained Flexicon FMB210 automatic filling and capping machine, supplied with a BU12 bottle unscrambler, previously used for e-liquid production. It could benefit from servicing and a new capping motor. Purchased in 2017, the equipment has seen relatively limited use and remains fully functional. The machine is offered with two format change parts (10ML and 30ML) and complete documentation, making it an attractive opportunity for manufacturers looking for a proven filling and capping solution. - Key Features • Flexicon FMB210 automatic filling and capping machine • BU12 bottle unscrambler included • Previously used in e-liquid manufacturing • Fully operational at the time of sale • Multiple format change parts included • Complete documentation available • Suitable for evaluation for e-liquid, liquid filling, and other compatible production applications • Price in 2017: 2,618,000 DKK (€351,000) - Condition & Availability The equipment is available for inspection by appointment. Further technical information, photographs, videos, and details of the included format parts can be provided upon request. The video in the advertisement shows a similar machine. Location: Aalborg, Denmark

Condition: excellent (used), Year of construction: 2025, Hot fill bottling line - previously used on 500ml microwaveable bottles of soup. Consists of stainless steel bottle unscrambler with hopper and inclined conveyor, 90 degree infeed conveyor, 16 head in-line filler, 3 head inline capper, stainless steel cap unscrambler with hopper and elevated conveyor. Installed new late 2025 and only available label due to the Bankruptcy of contract packer. Credpfx Ajztqfnok Aji

Condition: used, Year of construction: 2016, machine/vehicle number: SO125, Used Blow Molding Machine Terekas up to 5L 1000 bph This used blow molding machine from Terekas, model FlexBlow 1, is designed for demanding PET bottle production, offering advanced flexibility and efficiency. With a maximum bottle capacity of up to 5 liters and a throughput of up to 1,000 bottles per hour, the system is engineered for operations that require consistent product quality across multiple neck finishes and formats. The FlexBlow 1 utilizes a linear blow molding architecture, equipped with a single cavity, making it ideal for short production runs, frequent changeovers, or pilot lines. It integrates seamlessly into existing filling and packaging lines, thanks to its modular design and compatibility with multiple container types. The preform feed system includes a tipper, unscrambler, and loader, all designed to ensure reliable, jam-free supply of preforms into the production cycle. The core of the process begins with a robust preform heating tunnel, employing infrared (IR) lamps enclosed within a secure, ventilated housing. Preforms are conveyed through the heating zone by an articulated chain system, which ensures precise and uniform exposure to the heat source. The IR heating zone is shielded by a protective grid, preventing accidental contact while maintaining optimal thermal consistency across the preforms. The tunnel design avoids excessive hot spots or thermal degradation of the preform, contributing to higher end-product quality and reduced scrap rates. Csdpfxs Adyyme Ak Aori Precise Control and Reliable Operation After exiting the heating tunnel, preforms are transferred automatically into the blow molding station. The FlexBlow 1’s single-cavity blow unit utilizes high-efficiency pneumatic actuators and robust mold clamping mechanisms to produce containers up to 5 liters in volume. This configuration allows for rapid cycling and excellent pressure control throughout the stretch-blow sequence. The complete air handling system is engineered for reliability, with integrated air recovery to optimize compressed air consumption and reduce overall utility costs. Critical to the system’s operation is the dedicated chiller, which ensures mold cooling circuits remain within the required temperature range, guaranteeing consistent bottle wall thickness and minimizing cycle times. All pneumatic and hydraulic components are mounted in a well-organized auxiliary area, with clearly labeled connections for maintenance and diagnostics. Filtration and lubrication points are readily accessible, supporting a high level of system uptime and minimizing unscheduled stops. Machine operation and process parameters are managed through a touchscreen HMI panel installed directly on the electrical cabinet. This interface provides real-time control over all production settings, alarm management, and maintenance prompts. The entire machine is wired in a highly organized manner, with secured electrical panels, neatly routed cables, and clearly identified terminals for ease of troubleshooting. All safety guards and interlocks are present and functional, ensuring the operator’s safety while maintaining access...

Condition: used, Year of construction: 2012, operating hours: 17,600 h, machine/vehicle number: SO140, Used KOSME blower unit 6 cavity - 12000 BPHTechnical Specifications & Performance DataThis rotary blow molding machine by KOSME delivers reliable PET bottle production with a proven 6-cavity configuration. Optimized for beverage production and industrial packaging, it achieves a maximum output of 12,000 bottles per hour on the 0.5L format. An energy-saving ceramic oven and an additional air recovery system support efficient operation, reducing both power and compressed air consumption. The machine comes customized for 28 mm neck finishes, aligning with common beverage closures used in water and CSD packaging.Manufacturer: KOSMEYear: 2012Architecture: RotaryNo. of cavities: 6Maximum output: 12,000 bottles/hour (0.5L)Container type: PET bottlesNeck finish: 28 mm customizationHeating system: Energy-saving ceramic ovenAir system: Additional air recoveryElectrical: 400 V, 50 Hz, 27 kWOperating hours: 17,600 hoursAdvanced Automation & Control SystemsThe machine features a robust control panel for process set-up and monitoring, supporting stable heating profiles across the ceramic oven zones and precise blow parameters for consistent bottle quality. Recipe-based settings streamline format optimization while minimizing operator intervention. Safety guarding and interlocks protect operators during production and changeovers, and the system supports efficient warm-up and standby modes to reduce energy use during short stops.Production Line Integration CapabilitiesDesigned for seamless integration in a used bottling line or as a standalone stretch-blow module, this unit interfaces easily with standard preform handling systems and downstream PET filling, labeling, and secondary packaging machinery. It supports beverage production workflows where high efficiency and quick synchronization with conveyors and accumulation systems are required.Inline or standalone operationCompatible with standard preform handling equipment (elevator, tipper, unscrambler)Interfaces with PET fillers, labeling machines, shrink wrappers, and palletizersFormat noted: 0.5L; additional sizes can be configured with appropriate toolingMachine Condition & Maintenance HistoryThe machine is currently in production and reported in very good condition. It has approximately 17,600 operating hours and has recently undergone its scheduled 18,000-hour maintenance. Documentation is available to support commissioning, operation, and maintenance activities, ensuring a smooth start-up in a second hand or upgraded industrial packaging environment.Currently in productionVery good conditionRecent 18,000-hour maintenanceManuals availableOperational Performance & VersatilityWith a 6-cavity rotary platform and energy-saving ceramic oven, the machine offers stable production at 12,000 bph on 0.5L PET bottles. The additional air recovery system enhances efficiency by redu... Crsdez E Dh Rjpfx Ak Aji

Condition: used, Year of construction: 2002, machine/vehicle number: LC698, Used AVE monoblock 1-75-24 filling line 30000 BPH - Year 2002Technical Specifications & Performance DataThis used bottling line is designed for high-speed handling, filling, capping, inspection and secondary packaging of PET and glass bottles. The declared maximum line speed is 500 bpm, while individual equipment is rated up to 900 bpm in bottle handling sections and 800 bpm through the filling, capping and inspection stages.Declared maximum line speed: 500 bpmContainer handling: PET and glass bottlesFormats: Mignon 50ml Filling monoblock: AVE Monoblock 1/75/24 with 75 valves, rated at 800 bpmPrimary capping equipment includes Zalkin and Fowler cappersSecondary packaging includes shrink wrapping, bundle labeling, case forming, glue application, checkweighing and case turningMachine years represented in the line range from 1984 to 2020Advanced Automation & Control SystemsThe line combines dedicated bottle handling, cap handling, filling, closure inspection and reject systems to support controlled beverage production. Inspection equipment includes a Heuft Basic BA-R20 unit for bottle-cap and low/high fill-level inspection, followed by a Heuft pusher rejection unit.Available electrical data includes a Lanfranchi bottle unscrambler rated at 400 V, 60 Hz and 4 kW. The Tekkra shrink wrapper is rated at 480 V, 60 Hz, 102 A and 3-phase power. The Pearson case former is rated at 460 V, 60 Hz, 3-phase power, 3 KVA and 15 A. The Thermo Scientific Versa checkweigher operates on 120 VAC, 50/60 Hz, single-phase power.Production Line Integration CapabilitiesThe complete bottling line is arranged for bottle preparation, filling, capping, inspection and downstream industrial packaging. Bottle unscrambling, dumping and merging equipment supports PET and glass bottle flow, while cap elevators, cap conveyors and cap sorters provide closure handling upstream of the capping stations.Machine typeManufacturer / modelYearVarious EquipmentDumpers Unlimited Bottle Unloader2017Various EquipmentLanfranchi .24.58 Bottle Unscrambler2003Various EquipmentHartness Bottle Dumper2004Various EquipmentLanfranchi Merger2018Various EquipmentPerrier MFL. 60 / MFG 60 Cleaner1984Filling MonoblockAVE Monoblock 1/75/24 Codpfxo Ad Rixj Ak Aeri

Condition: ready for operation (used), Step feeder , board and plank singulator. Crsdpfjz Uu Insx Ak Aei Suitable instead of board elevators and unscramblers.

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction Cedpfoxqzmwox Ak Ajri 2. Filling Machine BREITNER MDL 2086 - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: used, Year of construction: 2022, Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  - Capacity: Up to 150 bottles/min - Operation: Continuous from bulk hopper feed Csdpfx Akexqpk Dj Aori - Bottle types: Plastic (PET, HDPE, etc.) - Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) - Bottle orientation: Bottom-first via pneumatic flipping device - Machine direction: Left to right - Working height: 900 mm - Frame: Welded, stainless steel (AISI 304) - Sort drum diameter: 1,500 mm - Control system: B&R industrial computer with 12.5” touchscreen, integrated diagnostics, remote access - Electrical supply: 3 × 400 V, N, PE, 4 kW - Compressed air: 400 Nl/min at 6 bar - Machine guarding: Polycarbonate panels - Safety: Error detection with clear text display - Condition: As new (used for demonstration only) - Warranty: 12 months manufacturer warranty

Condition: used, Year of construction: 2010, Overview Sidel SBO 10/10 Universal rotary stretch blow moulder with 10 cavities, built in 2010, for PET bottles. The machine is still installed and can be visited by appointment. It is offered together with its preform feeding system and a Sidel-Alsim air conveyor. Technical data - Manufacturer: Sidel - Model: SBO 10/10 Universal - Year of manufacture: 2010 - Number of cavities: 10 - Neck finish: 28 mm PCO 1881 - Products: PET bottles Scope of Delivery Crsdpfx Aks Af S E Ij Aoi - Stretch blow moulder | Sidel | SBO 10/10 Universal | 10 cavities, operator panel | 2010 - Preform feeding system | Sidel | Preform hopper, elevator and roller unscrambler | 2010 - Air conveyor | Sidel-Alsim | Bottle air conveyor at the outfeed | 1999 Condition Still installed. Inspection on site is possible by appointment. Availability Available immediately.

Condition: used, Year of construction: 2003, Year: 2003 Type: hot or cold product filling line for pots and bottles Application : Suitable for viscous products such as creams in the cosmetics / pharmaceutical or other industries   Type : Automatic linear filler Manufacturer: Tirelli Model : CHICO 2P Year: 2003 Number of heads : 4 units Volumetric filling technology with 2 metering pistons Cjdpfx Akox R Ddbe Asri Jacketed 25 L hopper + piping Temperature controller Pneumatic bottle-lock centring device PLC controls and configuration Linear conveyor with pallet chain SISE 95E6E 13 DC60 temperature controller (3.5 KW / 90°C / Water) – Year 2014   Type : Automatic capping machine with star wheel Type of cap: screw cap Manufacturer: Tirelli Model : RO Year: 2003 Automatic cap feeder : vibrating bowl + giraffe conveyor Presence / jamming / dispensing sensors Pick and place   Type: Automatic jar / bottle unscrambler Manufacturer: Romaco Bosspack Model : MS150 Year: 2003 Output : up to 150 jars / min Product dimension : Diameter: 30 mm min / 100 mm max Height : 50 mm min / 200 mm max Width : 30 mm min / 100 mm max Length : 30 mm min / 100 mm max Machine dimensions : Length : 150 cm Depth : 340 cm Height : 140 cm   Video in running condition :

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Codpfxsy I Ac Do Ak Aori

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment Crodpfx Akoz I Tbrs Aoi - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. It is already packed in seaworthy export crates. Techn. Details - Capacity: 7.200 bph in 1,5L - Number of moulds:  6 (molds not included) - Equipped with quick change for shell molds - Number of heating modules: 10 modules - Neck personalization: 29/25      - Working hours: 47.000 only         - Machine was regularily maintained       - Retrofitted by the previous owner in 2020 Cedpfx Akerkgy Uo Aeri - Machine equipped with:            - Sidel preforms elevator to unscrambler - Sidel preforms unscrambler & feeder - Sidel oven & blowing wheel for 6 molds - Sidel electrical cabinet - Sidel PCC drive & control panel - Big set of spare parts list upon request

Condition: used, Year of construction: 2001, machine/vehicle number: SO95, Technical Specifications & Performance Data The Sipa 8/4 is a compact, reliable Blow Molding Machine ideal for small-format PET bottle production within a used bottling line. Built for continuous duty in beverage production and industrial packaging environments, it combines proven mechanical design with essential utilities to support efficient operation. Manufacturer: Sipa Model: 8/4 Year of manufacture: 2001 Category: Blow Molding Machine Nominal output: up to 3,500 bph (bottles per hour) No. of cavities: 4 Bottle format: 0.06 L (60 ml) Csdpfxj Adywxe Ak Ajri Primary container material: PET (preform-based stretch blow molding) Preform neck type: Corvaglia e 29/21 Included utilities: Compressor (1), Chiller (1) Not included: Preform unscrambler (0), Preforms tipper (0), Elevator (0), Air Recovery System (0) Condition: In storage Documentation: Manuals available Advanced Automation & Control Systems This second hand Sipa 8/4 offers straightforward operation through a centralized operator interface designed for routine parameter adjustments. Heating, stretching, and blowing parameters can be configured to suit the specified preform and neck finish, supporting consistent bottle quality for small-volume applications. Central control panel with recipe/parameter management for quick setup Multi-zone preform oven for precise thermal conditioning (typical for the series) Integrated alarms and diagnostics to assist maintenance and uptime Safety features included with guarding and interlocks around moving and hot sections Standard industrial three-phase electrical connection (exact ratings available on request) Production Line Integration Capabilities Designed for seamless integration in a used bottling line, the machine can be fed by a preform hopper/elevator and unscrambler (not included) and discharges to conveyors toward rinsing, filling, capping, and labeling systems. Its output matches compact lines handling small PET bottles for water, juice, functional shots, syrups, and other beverages. Upstream compatibility with preform tipper, elevator, and unscrambler systems Downstream integration with rinsing, filling, capping, labeling, inspection, and packing Supports beverage production workflows for water, juice, beer, wine, and more (downstream processes may include PET, glass, or aluminum packaging) Format changes within the 0.06 L range via appropriate molds and change parts Machine Condition & Maintenance History The unit is currently in storage with manuals available, facilitating recommissioning and operator training. As with any second hand industrial packaging equipment, a full inspection, routine service of the pneumatic and heating circuits, and verification of utilities are recommended prior to start-up. Wear parts and consumables should be assessed to align with production targets. Operational Performance & Versatility With four cavities and a 3,500 bph nominal speed, th...

Condition: used, Year of construction: 2006, operating hours: 68,702 h, machine/vehicle number: LC624, Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically controlled with flow switches (volumetric)Key models and modules:Krones Contiform S20 blow molder (2006)Krones Volumetic filler (2006)Krones capper (2006)Krones Checkmat bottle inspector (2006)Krones SynCo bottle conveyor system (2006)Krones Etima labeling machine (2006)Markem Smart Lase C350 laser coder (2015)Ocme Vega N70/2 shrink wrapperComag/Decimo HM 100/2 handle applicator (2006)Ocme Pegasus M400 palletizer (2006)Bema Silkworn Turbo pallet stretch wrapper (2006)Eidos 7P6ERLP pallet labeler (2020)M. Tanner AG/Prologic preform hopper (2018)M. Tanner AG preform unscrambler (2006)Gassner cap hopper (2006)Cryotech International nitrogen doserEuropool pack conveyorAdvanced Automation & Control SystemsThe line is equipped with Siemens PLC-based automation for coordinated control across blow molding, filling, labeling, and end-of-line operations. The filler uses electronically controlled flow switches to ensure accurate volumetric dosing and consistent fill levels at high speeds. Centralized controls, synchronized conveyors, and integrated inspection enhance efficiency while minimizing downtime and changeover complexity.Siemens PLC architecture across the production lineVolumetric filling with electronic flow controlIntegrated inspection via Krones CheckmatCoordinated conveyor logic with Krones SynCoLaser coding by Markem Smart Lase C350Production Line Integration CapabilitiesThis production line integrates seamlessly from preform handling through pallet labeling. The Krones SynCo and Europool conveyor systems ensure smooth transfers between modules, while the shrink wrapper, handle applicator, palletizer, stretch wrapper, and pallet labeler complete a fully automated packaging and logistics flow.Inline operation from blow molder to pallet labelerFormat compatibility: 0.5L and 1.5L PET... Crjdpey Icpqsfx Ak Aoi

Condition: used, Year of construction: 2003, Overview SIG Corpoplast BLOMAX 18 Series III rotary stretch blow moulder for PET bottles, built in 2003. Rated output is up to 27,000 bottles per hour on 0.5, 1.0 and 1.5 L bottles and up to 24,300 bottles per hour on 2.0 L. The machine last produced 1.0 L bottles for mineral water and carbonated soft drinks at 27,000 bottles per hour with a PCO 1881 neck finish. It ran in production until August 2026 and is still installed and under power. The preform feeding (box tipper, inclined elevator and unscrambler) and the chiller are part of the sale. Cedjz Ng Aaepfx Ak Asri Technical data - Manufacturer: SIG Corpoplast - Model: BLOMAX 18 Series III - Year of construction: 2003 - Machine type: rotary stretch blow moulder for PET bottles - Rated output: max. 27,000 bottles per hour on 0.5 / 1.0 / 1.5 L, max. 24,300 bottles per hour on 2.0 L - Last format: 1.0 L bottle, 32 g, 28 mm PCO 1881 neck finish, petaloid base - Blow air pressure: 40 bar - Blow air consumption, nominal: 1,072 m³/h on 0.5 L and 1,724 m³/h on 1.0 L at 27,000 bottles per hour - Connected load: 255 kVA machine, 62 kVA chiller - Working voltage: 400 V, 3 phases + N, 50/60 Hz - Rated current: 480 A, max. fuse 500 A - Control voltage: 24 V DC - Dimensions (L x W x H): 11.5 x 11.2 x 4.2 m including preform feeding - Weight: 30,550 kg - CE marked Scope of delivery - BLOMAX 18 blow moulder with preform heating oven and blow wheel - Two operator panels with touchscreen HMI - Electrical cabinets and media connections - Preform box tipper for octabins and mesh boxes - Inclined preform elevator - M. Tanner preform unscrambler with access platform - Chiller - Spare parts from stock, list available on request Blow moulds are not included in the sale. Condition Used in water bottling until August 2026. The machine is still installed and under power and can be inspected. Availability Dismantling is possible from week 49 of 2026; the machine is available from 30 November 2026.

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Crsdperazwrjfx Ak Aji - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale.

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: Crodpfxjtrd Hfo Ak Aji - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: used, Year of construction: 2020, machine/vehicle number: M305, Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materials: PET, HDPE Product types: Liquid detergents, liquid soap (suitable for non-carbonated, non-aseptic applications) Filling technology: Volumetric piston filling No. of filling valves: 24 Nozzle type: Mobile nozzles Max fill volume: up to 1 L Capper: 8-head pick-and-place pneumatic spindle capper Cap type: Plastic screw caps (one cap size currently tooled) Machine rotation: Clockwise Nominal speed: up to 5,000 bottles/hour (depending on product, bottle, and closure) Isobaric: No (non-pressurized filling) Aseptic: No Integrated rinser: Not included Filling Section Cjdpfxeyhb R Sj Ak Ajri Bottle infeed screw Central product tank with magnetic float switches 24 pneumatic cylinders, upper plates, lower plates Internal plates with stainless-steel/Viton sealing Opening/closing valves per station Capping Section 8 pneumatic capping heads with spindle screwing system Pick-and-place cap transfer Vibratory cap bowl (one cap size) Cap cup and cap chute (one cap size) Automatic cap elevator Mechanical & Structural Frame: Painted iron External panels: Stainless steel Protective hood: Enclosed with doors and safety devices Advanced Automation & Control Systems Pneumatic control panel for filler and capper actuation Electrical panel with CE-compliant components Wiring diagram included for streamlined commissioning Magnetic level control in product tank for stable filling Production Line Integration Capabilities This monoblock integrates seamlessly into second-hand used bottling line configurations for industrial packaging and beverage production of still, non-pressurized liquids. Its clockwise carousel rotation, bottle infeed screw, and cap-handling system allow straightforward connection with upstream conveyors, depalletizers, blow molding machines, and downstream labellers, inspection systems, and secondary packaging. Upstream compatibility: Blow molding machine, bottle unscrambler/depalletizer, conveyors Downstream compatibility: Labeller, inspection/quality control, packer/shrink-wrapper, palletizer Changeover scope: Supplied with 1 bottle format and 1 cap format; additional formats can be engineered on request Machine Condition &...

Condition: new, Year of construction: 2026, functionality: fully functional, Pallet Board Stacker PBS M4 + DS-1.0 Automatic Pallet Production Line Stacker with Crosscut saw (DS-1.0) Automatic pallet board stacker designed for efficient integration into pallet production lines. Ensures precise board alignment, stable stacking and high production capacity with minimal manual handling. Included equipment: -Control program -Stacker with integrated lift -Board unscrambler -2 spacer dispensers with support frame Crodszauclopfx Ak Aei -Discharge conveyor with lift platform -Package lift for easy forklift handling -Suitable for continuous industrial pallet board production. High-performance double-rip crosscut saw designed for seamless integration into automated board production and stacking lines. Crosscut saw (DS-1.0) -Specifically built to operate within a board stacker line. -Synchronized Workflow - automatically matches the speed of the stacker for maximum efficiency. -Clean Cuts - precise double-blade system for high-quality cross-cutting. -Designed for 24/7 sawmill environments. -Ideal for sawmills looking to automate the transition from cutting to stacking with zero bottlenecks.

Condition: used, Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE Credpfx Aewa Tqiek Aji The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors. Bottle Feeding and Preparation Section At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages. Weight-Based Filling and Snap-On Capping The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time. Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Csdpfomk I Dwex Ak Aeri

Condition: new, Year of construction: 2025, This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 45-90mm; bottle height: 75-240mm; sorting speed: max. 100 bottles/min; machine stops automatically when the bottles are jammed due to photocell; MITSUBISHI PLC, WEVIEW touchscreen, OPTEX photocell, SCHNEIDER frequency converter; Frame of stainless steel (SS304); compressed air: 6-8bar; power: 220V, 2kW; machine dimensions: L2600xW1500xH1500mm. Optional: different unscramble trays for different bottle sizes. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Credpev Nk Hujfx Ak Asi