Used Bottel Filling Machinery for sale (75,513)

Condition: used, Year of construction: 2015, functionality: unexamined, For sale: Semi-automatic capsule filling machine for capsule production. Currently set up for size 0 capsules, complete with a vacuum pump. Also included is a semi-automatic capsule counter that automatically counts out the set quantity of capsules while packaging is being placed. (Both machines are being sold together as an inseparable package.) The equipment has seen very little use (only for production testing) and has been stored in a warehouse for many years. I cannot fully guarantee the technical condition of the capsule filler; however, when connected to power, all motors run properly, but a full technical inspection is recommended. The capsule counter has been checked and operates correctly, quickly counting the specified quantity (in multiples of 5 pieces). Details below: Capsule Filler: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: DJ-C Semi-automatic capsule filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 400V 50Hz (3-phase) Power: 3.1 kW Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: 135x70x160 cm Note: The capsule filler has visible dents on the housing (see photos) caused during transport, but the working elements are not damaged. Capsule Counter: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: HA-1 Capsule counting and filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 220V 50Hz (1-phase) Power: 60 W Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: approx. 150x70x50 cm The listed price is net. A VAT invoice is issued. For EU companies, 0% VAT for intra-Community supply. Assistance in organizing transport to the customer is possible. This is a courtesy listing; price and availability to be finally confirmed. The equipment is CE-marked (no manual or other documentation is included). Fodpew D Et Dsfx Afnspc We reserve the right to amend or withdraw the listing at any time without notice. This listing does not constitute a commercial offer as understood by commercial law.

Condition: good (used), Year of construction: 2014, Food Machinery Co E4230 VFFS bagger Fedpfewtqrwsx Afnjpc 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 3,100 mm, total width: 3,100 mm, stroke length: 950 mm, column diameter: 130 mm, mold height (min.): 900 mm, clamping force: 35,000 kN, pressure: 400 bar, Installed and commissioned with dry, test run only. - Two‑platen machine - Max locking force: 35,000kN - Injection force: Approx. 390–420kN (varies by plunger size) - Plunger diameter: Ø130mm - Plunger stroke: 950mm - Shot weight (Al): 6.5–8.5kg, depending on plunger - Projected area at 400 bar: 8,750–9,000cm² (calculated from 35,000kN clamping force) - Platen size (H × W): 3100× 3100mm - Distance between tie bars (H × W): 1950×1950mm - Die height (min / max): 900/1350mm Fjdpjygxr Refx Afnopc - Die opening stroke: 1200mm Støtek melting system with - Støtek SMG 3.0_7.0 two chamber gas fired melting shaft furnace with ingot charging elevator, furnace melting capacity approx. 1.5t/h - Støtek DTI 6020 holding furnace with Fuco-Heg MBS 2000 molten metal treatment/rinsing station - Støtek AMET 1700 dosing furnace LK Impress Plus DCC 3500 die casting machine with - Siemens PLC S7-1500 controls - ABB IRB 6650S die release agent spray robot - Wollin OSA 15-2-C die release agent supply system and spray head - AED 181-080 die lubrication dilution system - Fondarex Highvac Premium 2C 200 die casting vacuum system with air tank and vacuum pumps - 5x IECI PFN 330 2-Z oil temperature control units - 5x IECI PF-ZH 1802-Z water temperature control units - KMA Ultravent UV 20000EE fume extraction and filter system - ABB IRB 7600 robot for die casting machine unload, trim press load/unload and cooling station load - LK WB-100 1,000kN trim press with trim conveyor - ABB robot for cooling station unload, laser marking and outfeed - Keyence MD-X 1500C 3 axis laser marking system - Outfeed conveyor with cooling tunnel A quantity of spare parts is available with the line.

Condition: used, Year of construction: 2015, operating hours: 10,680 h, machine/vehicle number: IntNr231480, CNC Swiss-Type Lathe Citizen A32 (A232-VIIPL) Fpjdpfxsyg Nq Do Afnec Year of Manufacture: 2015 Control System: Cincom Mitsubishi Meldas M70 TECHNICAL DATA Number of axes: 7 Number of spindles: 2 MAIN SPINDLE Maximum bar diameter: 32 mm Maximum machining length: 320 mm Travel: 325 mm Spindle speed: 200 – 8,000 rpm Spindle drive power: 5.5 / 7.5 kW Minimum C-axis resolution: 0.001° SUB SPINDLE Maximum bar diameter: 32 mm Z-axis travel: 290 mm X-axis travel: 370 mm Spindle speed: 200 – 8,000 rpm Spindle drive power: 2.7 / 3.7 kW Minimum C-axis resolution: 0.001° Driven tools for rear-side machining ACCESSORIES Instruction manuals and documentation Parts conveyor belt LNS chip conveyor Bar feeder FMB Turbo 3-36 / 3200 WEIGHT AND DIMENSIONS Footprint (L×W×H): 2,520 × 1,300 × 2,229 mm Machine weight: approx. 3,500 kg The machine can be inspected by appointment. Technical data and information are subject to change and error. Prior sale reserved.

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: HU50610, Controller 15" touch screen with Windows Operation System Interface Table size 630 x 360 mm Dimension of tank LxWxH = 940 x 550 x 350 mm X travel 400 mm Y travel 300 mm Z travel 300 mm Distance between the table and chuck 100 ~ 400 mm Max weight of electrode 11/50 kgs Max weight of wpc on table 500 kgs Fjdpfswktkksx Afnspc Max Output power 50A Best surface quality of work 0,08 Ra Input power 10 kVA Dielectric capacity 300 litre Dimensions of the machine LxWxH = 1320 x 1380 x 2150 mm Weight 1450 kgs Accessories, features - No. of filters 3 pcs. - C axis (max loading 11 kg) - Dielectrictank - Machine mouths - Manuals - Handtools

Condition: good (used), Year of construction: 2018, functionality: fully functional, Controller FANUC MXP-200FC Table size D380 mm Table load max 200 kg X travel 700 mm Y travel 520 mm Z travel 480 mm A axis +30/-120 degree C axis 0-360 degree Spindle speed 12000 rpm Tool holder type BBT40 Rapid speed 36/36/24 m/min Feedrate 1 - 100000 mm/min Max tool diameter and length D78 x 280 mm Max tool weight 6 kgs Spindle power 22,5 kW Fodpfjr I Az Tjx Afnepc ATC magazin 30-fold Power required 46 kVA Accessories, features - CTS - integrated 4/5 axis - Coolant unit - Chip conveyor - Mist collector - external hydraulic - manuals The machine is still under power and can be inspected in function. Ready to buy.

Condition: good (used), Year of construction: 2005, turning diameter over cross slide: 240 mm, turning length: 1,016 mm, turning diameter: 406 mm, spindle bore: 51 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, quill stroke: 120 mm, Main spindle (headstock) Spindle bore: 51.5 mm Spindle mount: D1-6 Spindle taper: MT 6 Speed steps: 12 steps Speed range: 30 – 2,000 rpm Feeds & threads Longitudinal feeds: 0.03 – 0.89 mm/rev Cross feeds: 0.015 – 0.44 mm/rev Fjdpfjyi D Tfox Afnspc Metric threads: 0.4 – 14 mm (52 types) Inch threads: 2 – 56 TPI (40 types) Tailstock & carriage Tailstock taper: MT 4 Quill stroke: 120 mm Top slide travel: 120 mm Cross slide travel: 228 mm Drive & dimensions Main motor: 7.5 HP (approx. 5.5 kW), 3-phase Weight: approx. 1,945 kg Dimensions (LxWxH): approx. 226 x 96 x 165 cm

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Fjdpfoxn Aagsx Afnopc

Year of construction: 2009, condition: ready for operation (used), A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025. Fodpsu S I D Rsfx Afnepc

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Fodewc A Rkjpfx Afnspc

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp Fpodeyh Ri Ijpfx Afnjc - Tool cabinet - Various tool holders

Year of construction: 2007, condition: excellent (used), REF: MM5765 Fedpoukw Nbsfx Afnepc 1 x Record Packaging Machinery flow wrapper with Domino V230i thermal transfer overprinter and infeed conveyor. Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Model - Scorpion MD SP. Date of manufacture - 2007. Speed - between 20 to 120 packs/minute (depending on product size). Sealing jaws - 350mm long. Infeed conveyor - 185mm wide. Outfeed conveyor - 220mm wide. Previous use - for packing cereal bars and biscuits. Overall dimensions - 4670mm L x 1350mm W.

Year of construction: 1999, condition: good (used), REF: MM5766 1 x Record Packaging Machinery flow wrapper with infeed conveyor. Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Fsdpfx Afeukw Haenjpc Model - Scorpion. Date of manufacture - 1999. Speed - between 20 to 80 packs/minute (depending on product size). Sealing jaws - 240mm long. Outfeed conveyor - 120mm wide. Previous use - cereal bars. Overall dimensions - 3100mm L x 1350mm W. *Please note* - 1. No inkjet printer will be supplied with the machine.

Condition: used, Year of construction: 2016, gebraucht 2016 9737 prompt, Zwischenverkauf v 9800 € 1 8330 € 2025 mm 3 mm 500 mm 4 kW 2500 mm 1720 mm 1200 mm Fjdpjwiq Iwjfx Afnjpc 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity

Condition: used, Year of construction: 2025, New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc. Applications: - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products. - Cheese Production: Used before cheese-making to ensure safety. - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream. Advantages of Batch Pasteurisation: - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations. - Flexibility: Suitable for small batches or varied products and recipes. - Quality Control: Allows for greater control over the pasteurisation process. Volume capabilities (litres): 300 Control panel: Stainless steel Control box, Controls, Thermometer Controller, ON/OFF Agitator, Chart Recorder; ; Heating options: Heating Elements, Hot Water and Steam Fedpexl N H Usfx Afnspc Milk pasteurisation: 68-75c Max temperatures: 95c Cooling options: Connection to Ice Bank and Circulation Cold water through the Jacket; Plate Cooler Connection on the Outlet; Heating time: Between 30m-1hr for BPT100 to BPT500 Series With Heating Elements; BPT600 -BPT2000 Heating by HOT water or Steam; Cooling time: 30min to 45min Depending on Cooling Temperatures; Plate cooler at 30min Standard; Structure: Stainless steel 316L & 304 Triple Jacket with Insulation; ; Agitation: Slow Agitation with double props at two diferent levels; High Shear mixing for Ice Cream; Cleaning: Spray ball internally for even cleaning by circulation of Hot water and chemicals used in the food industry; ; Automation: We offer Full automation on our batch Pasteurisers that cover the full circle of heating down to cooling; Additional Costs will be added for automation; Openings: Two Up Folding Covers for Easy Cleaning and Inspection; ; Product outlet: DIN40-DIN50 On semi cone to make sure all product flows out; ; Uasege: Milk Pasteurisation/ Ice Cream Mixing/ Ice Cream Fermentation/ Sauces/; ; Lead time: 5-8 weeks from Order Delays may apply during COVID 19; ; Finance Available: Pay Monthly, Ask For A Quote

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 250, 500, 1000 ml PET/Plastic bottles with the cap D- 38 mm Made by SELO, Netherlands. Fpodpfx Asyiptqofnsc Consisting of: 1. 2x Accumulation Tables 150 cm diameter Motorised 2. Rotary Bottle Washer 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller 6. Associated conveyors AS NEW CONDITION

Condition: used, Year of construction: 1986, functionality: unexamined, machine/vehicle number: HM32, stroke length: 10,000 mm, coil weight: 2,000 kg, Complete used line for continuous extrusion of aluminum, conform process, Holthon Machinery brand, model C300H. Fsdpfxsyic Rtj Afnjpc

Year of construction: 2025, condition: new, ⚡ Processing Capacity ✔️ Up to 400 kg/h Perfect for medium to high-volume operations. 🔁 Applicable Materials ✔️ All types of electrical cables ✔️ Mixed and contaminated cables ✔️ Complex, multi-layered cable structures 🔍 Included Machines & Functions Machine Functionality Shredder Primary size reduction for bulky cables Overbelt Magnetic Separator Ferrous metal removal with high-power magnets Fpjdownm Spspfx Afnjc Granulator Fine and uniform size reduction Zigzag Separator Light/heavy fraction separation Densimetric Separator Density-based material classification Air Cyclone Separation of dust and light particles Turbo Mill Ultra-fine grinding for tough materials 🔄 Key Advantages 🧩 Modular Design: Each machine operates independently 📈 Scalability: Easily expandable and reconfigurable 🧪 High Purity Output: Precise and clean material separation 🌱 Sustainability: Energy-efficient and environmentally friendly 🔧 Easy Maintenance: User-friendly design and accessible parts 🎯 Designed For Recycling companies seeking maximum efficiency Businesses aiming for high purity and low loss rates Operators needing flexibility and growth options

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 30 rpm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, input voltage: 380 V, controller manufacturer: Fagor, controller model: 8055/FL 1 Jahr alt, Equipment: documentation/manual, Microcut / Buffalo Machinery Company Limited CV-850 Year of manufacture: 2002 Control: Fagor 8055/FL, 1 year old Travel paths: X – 850 Y – 500 Z – 450 Voltage: 400V Power: 56 kW Spindle speed: 30 – 1200 Fsdpfxsyhbw Eo Afnopc Table size: 900x530 mm T-slots: 14 mm wide, spaced at 60 mm Table load capacity: max. 400 kg A wide range of tool holders and tools included! Price is net plus VAT:

Condition: excellent (used), Year of construction: 2019, Double-sided grinder Production date: 07.2019 New not used. 1) Net weight: 15000 kg 2) Dimensions: 2200 x 3100 x 3050 mm 3) Higher grinding speed 4) High precision Fodpfet Dmmcox Afnjpc Technical specifications 1) Grinding width (max): 1300 mm 2) Grinding thickness: 5-150 mm 3) Grinding length:> 700 mm 4) Abrasive belt speed: 25 m/s 5) Abrasive belt dimension: 1350 x 2800 mm 6) Total motor power: 163.25 kW 7) Grinding head motor: 75 kW x 2 8) Motor for feeding: 11KW 9) Lift motor: 0.75 kW 10) Brush motor: 0.75 kW x 2 11) Feeding speed: 10-30 M/min 12) Power supply: 380 V 50 Hz 13) Working pressure: 0.6-0.8 MPa 14) Extraction capacity: 24000m³/h a. Thickness of sanding boards in large range: 5-150mm. b. Machining plate thicknesses greater than 25mm with good quality. c. The upper and lower conveyor pressure roller adopts double power transmission, so that the transmission efficiency is increased and smooth operation is maintained. It can ensure grinding with high accuracy and good surface quality. d. To meet the needs of different plate processing, they used variable frequency and adjustable speed system and variable speed motor for conveying. e. Siemens electrical parts were selected as the main parts with long service life.

Condition: new, Year of construction: 2025, Mizar Compact Series Cable Recycling Machines are designed for the efficient recycling of cables of different diameters and materials. By breaking down cables, they separate metal and plastic components, ensuring maximum material recovery. Fodpfx Afjv Hbdrenopc ✅ Efficient Cable & Radiator Recycling – Effectively separates metal and plastic. ✅ Turbo Mill Technology (CMT Models) – Achieves higher purity by completely separating fine copper wires. ✅ Compact Design – Ideal for facilities with limited space. ✅ Energy Efficient & Cost-Effective – Minimizes operational costs. 🔸 Recyclable Materials: ✔ Cable ✔ Radiator 🔸 Technical Specifications 🔹 CMT Power: 20 kW Granulator Motor: 11 kW Granulator Blade: 3+2 Length: 1300 mm Width: 1500 mm Height: 2140 mm Weight: 1380 kg

Condition: new, Year of construction: 2025, total width: 780 mm, total length: 1,240 mm, total height: 1,330 mm, overall weight: 480 kg, The CBR A3 Cable Stripping Machine is specially designed to strip the outer insulation material from cables of all sizes, making it easy to remove the conductive material inside. This series offers superior performance on; steel-armored cables (SWA), double steel-armored cables, steel tapes, PVC-coated cables, Fpedpfx Afsff H Imonjc lead-coated cables, thick rubber-coated cables, nylon-coated cables, low-grade cables, TT cables, and more. Specially processed blades with unique designs allow cables of any length to be cut and stripped for a long time without dulling the blades. All electrical and electronic components in the CBR A3 Series are Siemens brand. Our products are manufactured and certified in accordance with CE and EAC standards. Technical Specification POWER 5.5 KW CABLE DIMENSIONS 1-120 mm CUTTING SPEED 25 meter/min LENGTH 1240 mm WIDTH 780 mm HEIGHT 1330 mm WEIGHT 480 kg

Year of construction: 2025, condition: new, ⚡ Processing Capacity ✔️ Up to 800 kg/h Perfect for medium to high-volume operations. 🔁 Applicable Materials ✔️ All types of electrical cables ✔️ Mixed and contaminated cables ✔️ Complex, multi-layered cable structures 🔍 Included Machines & Functions Machine Functionality Shredder Primary size reduction for bulky cables Overbelt Magnetic Separator Ferrous metal removal with high-power magnets Granulator Fine and uniform size reduction Zigzag Separator Light/heavy fraction separation Fpjdpfjwnnmbex Afnsc Densimetric Separator Density-based material classification Air Cyclone Separation of dust and light particles Turbo Mill Ultra-fine grinding for tough materials 🔄 Key Advantages 🧩 Modular Design: Each machine operates independently 📈 Scalability: Easily expandable and reconfigurable 🧪 High Purity Output: Precise and clean material separation 🌱 Sustainability: Energy-efficient and environmentally friendly 🔧 Easy Maintenance: User-friendly design and accessible parts 🎯 Designed For Recycling companies seeking maximum efficiency Businesses aiming for high purity and low loss rates Operators needing flexibility and growth options

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, input voltage: 380 V, total length: 3,000 mm, total width: 1,500 mm, Equipment: documentation/manual, WatMachinery OT3015F is a modern fiber laser cutting machine with a 1500 × 3000 mm working area, equipped with high-quality industrial components and an automatic Raytools BS03K cutting head. The machine is designed for precise and efficient cutting of carbon steel, stainless steel, aluminum, and brass. Available laser source powers: 1500 W / 2000 W / 3000 W (Raycus). Key Advantages - Heavy-duty construction – high rigidity, stability, and vibration resistance - 4th generation aerospace-grade aluminum gantry – low weight, rapid acceleration, and high motion accuracy - Raytools BS03K cutting head – automatic focusing, optics protection, high cutting speed Fpsdpfx Aswiwtysfnsc - Raycus laser source – reliability, long service life, and high energy efficiency - Raytools XC3000S control system – intuitive operation, file editing, remote control capability - INOVANCE servo drives – high precision, fast dynamic response, stable operation Rebi N Auewiwtyofcen - Precision drive system – LEITESEN racks (dual drive) + PEK Italia linear guides - SMC pneumatic system (Japan) – reliability and longevity - Schneider (France) electrical components – high safety standards - S&A industrial chiller – dual-circuit cooling, alarms and machine protection - Fume extraction system – efficient smoke removal and improved working conditions - Complete industrial configuration – machine ready for operation immediately after installation Technical Specifications Model: OT3015F Working area: 3000 × 1500 mm Laser source: Raycus Fiber (1500–3000 W) Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X Axis - Max speed: 80 m/min - Travel: 3000 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Y Axis - Max speed: 80 m/min - Travel: 1500 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Z Axis - Travel: 100 mm Additional Parameters - Maximum acceleration: 0.8 G - Power supply: 380 V / 50 Hz - Operating mode: 24/7 continuous operation - Machine weight: approx. 1500 kg - Dimensions: 4500 × 2300 × 1500 mm Applications: ✅ Kitchen equipment industry ✅ Bathroom equipment industry ✅ Automotive ✅ Advertising and metalworking Why choose us? JET STAR INTERNATIONAL offers comprehensive solutions for laser cutting machinery, providing service, training, and spare parts availability throughout Europe. Our machines combine quality with affordability, delivering an excellent cost-to-performance ratio. 🗂️ Available to order 📞 Contact us for individual offers and delivery terms! 🌍 Support available in Polish, English, and German.

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231432, CNC short turning machine – Citizen Miyano BNE-51MSY Year of manufacture: 2018 Condition: Very good, fully operational Availability: At short notice Brief description Fodpfx Ajx Tg Sgefnopc For sale is a Citizen Miyano BNE-51MSY CNC short turning lathe in MSY configuration featuring main and counter spindles, as well as a Y-axis. This machine is ideal for precise and cost-effective complete machining of complex turned and milled parts in series production. Equipment / Highlights - Fixed headstock (short turning) - Main spindle + counter spindle - Y-axis - 2 tool turrets, each with 12 stations - Driven tools - Simultaneous machining capability - High rigidity and process reliability Technical data - Max. bar capacity: Ø 51 mm - Max. turning diameter: approx. 165 mm - Max. turning length: approx. 380 mm - Main spindle speed: up to approx. 5,000 rpm - Counter spindle speed: up to approx. 5,000 rpm - Control: Mitsubishi MELDAS - Machine weight: approx. 8,000 kg The machine is fully functional, both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale!