Used Bottle Cleaning Machine for sale (92,957)

Year of construction: 1982, condition: used, Bottle cleaning machine with label removal and Weishaupt oil burner. Twelve bottles are loaded into each row. A total of 25 rows run through the machine in a vertically oriented circle. In the lower section, the bottles pass through a lye bath. In the upper section, they are rinsed with fresh water. The clean bottles are then discharged cold. Additional title: single-ended machine Nominal capacity: 2880 bo/h Cell division: 110 mm Number of bottles in the machine: 300 pcs. Number of bottles per row: 12 pcs. Power: 13,5 kW Voltage: 220/380 V Gsdpsw Tbifefx Aftebu Frequency: 50 Hz Water: 1-2 bar Compressed air: 5-8 bar Length: 2480 m Width: 2500 m Height: 2500 m Weight: 2700 kg Base construction: singe-ended machine Features: Combustion chamber with Weishaupt oil burner, heat exchanger, vapour extraction, lye pump, water circulation pump, lye bath, bottle feed, label dispenser

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Gsdswb E S Ijpfx Aftjbu

Year of construction: 1993, condition: used, Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph Additional title: Single-ended machine Capacity: 21000 bo/h Bottles each row: 16 bo/row Godpfjvcqgzox Aftobu Length: 8,64 m Width: 4,47 m Height: 1,92 m Weight: 17900 kg Formats: 0,5 l NRW-Bottle Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank Periphery: S5 controll (HMI Lauer)

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust. Gsdpfev S Dihex Aftobu

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. Gedpowk D Dzefx Aftjbu We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) - External Module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) Gjdpfewum Svox Aftobu - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm Gbsdpfewty H Djx Aftju If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, mast type: standard, Sweeper suction machine Mast type: Standard Gbedpfx Asukrcpeftsu Technical condition: good Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear tire: 1 x bandage tire; Power steering; Front windshield; 2 x work lights / StVZO-like; Overall height: 2300 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 70 h, functionality: fully functional, overall weight: 870 kg, Item description: Hako Scrubmaster B120 R only 70 operating hours Gbjdpfjxl Emdjx Aftsu Year of manufacture: 2021 ----- Item condition: Item comes from a company liquidation. Good used condition.

Condition: used, Year of construction: 2006, Turning station for CNC cleaning machine ROTOX EPA 472, used Gjdpfxsw Ni T De Aftebu Attention! Only the turning station is for sale, without the cleaning machine.

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeping and suction machine Gjdpfx Ajxmb Slsftsbu Condition: New device Technical condition: New Battery voltage: 24V Battery type: Lithium-ion Battery year: 2024 Battery condition: 80 - 100% Description: New device with 12-month warranty

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. Gsdsd Hbp Ajpfx Aftobu - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Year of construction: 2019, condition: excellent (used), Very well-preserved rotating basket, parts wash, lacquer milling booth with all accessories for sale. Description: Cabin dimensions: Width: 2,245 m² Depth: 2.3 m Height: 2.48 m² Total height: 3,156 m² Tank capacity: ~ 1000 l Heating capacity: 18 kW Chemical pressure: 3 bar Gedpfohlvvujx Aftsbu Chemical operating temperature: 60-80 ° C Pumps: Calpeda MXH 406 2 pieces Heat exchanger: 20 kW Engine: Bonfignioli M05A4FD Motor power: 12 kW Exhaust system: Fan type: GE-500 H-J Capacity: 5000 m3 / h Power: 3 kW Maximum load 500 kg Equipment: Dimensions of the turntable hand-rinsing cubicle: 3.1 x 3 x 2.9 m 2 hand trucks 2 washing frames

Condition: used, Year of construction: 2014, operating hours: 8,498 h, functionality: fully functional, mast type: standard, Sweeper-scrubber Mast type: Standard Technical condition: normal Transmission: Hydrostatic; Tires: 2 x drive wheels bandage power steering Overall height: 2300 mm Gbsdpfjukrcisx Aftsu

Condition: used, Year of construction: 2019, Working condition and in standard configuration! Gedpfjxlzwxsx Aftobu Location within EU. Ask for additional details!

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 022607, Lavatubi La Chatre mod. 50 Gbjdpfx Afoxmgy Ietou Year 2002 Operational

Condition: used, Year of construction: 2011, operating hours: 762 h, functionality: fully functional, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeper-scrubber machine Gbjdpjxl H Uvofx Aftju Condition: Refurbished without warranty Technical condition: Very good Battery voltage: 24V Battery capacity: 240Ah Battery type: Gel Battery condition: 60 - 80% Description: The machine has been workshop tested, passed new UVV inspection, all sweeping rollers and brushes are new, with warning beacon.

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. Gbedpfst Rrkjx Aftsu - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Year of construction: 2010, condition: excellent (used), The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Godpfxew Hk T Uj Aftobu

Condition: new, New electric scrubber dryer, floor cleaning machine KREMER type KR-FL50A Godpfxovvww Ts Aftebu Year of manufacture 2024 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - No drive, the device is pushed by hand Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 80 h, functionality: fully functional, overall weight: 250 kg, total width: 1,540 mm, total height: 2,300 mm, total length: 850 mm, power: 1.2 kW (1.63 HP), air demand: 30 m³/h, type of input current: DC, The machine is robust and very useful for small production units. You can fill like 300-400 bottles per hour depending on the operator. The bottling machine is like new, we use it like 6-8 times. It has 4 rinsing heads, 4 filling heads and one tap head. The machine is isobaric so it suitable for carbonated products like beer, cider, juices or water. Godpfxeu A Ip Rj Aftsbu The tap is made for twist off caps but additionally we can sell also a crown caps head.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: EPA4706003, Fully functional, ready-to-use machine Gbsdpsxfixqefx Aftju Very little used (operated by 2 people) If you have any questions, please contact us!

Year of construction: 1991, condition: used, Additional title: one end machine Nominal capacity of filler: 50000 b/h Gjdpfx Aoxbpp Isftebu Time through machine: 20 min Operation / Control: Siemens S5 Base construction: one end machine Features: 323 baskets of 39 cells, hydraulic label press (manufacturer Hormes, year of construction 2014), plate heat exchanger

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket Gbeded Hbp Ejpfx Aftsu - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, SprayClean Front Loading Spray Washing Machines Gbjdj T D R Dopfx Aftju SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation