Used Bottle Washing Machine for sale (65,324)

Condition: new, Year of construction: 2005, functionality: fully functional, Machine slides for washing jars and bottles Dksdevtf R Nspfx Ak Aow the machine is new, never used

Condition: used, functionality: fully functional, SCH-BT/300S Bottle Washing, Filling and Capping Machine The SCH-BT/300S is a fully automated machine designed for washing, disinfecting, rinsing, filling, and capping 18.9-liter (5-gallon) water bottles. The system integrates a multi-stage cleaning process with automated bottle handling, filling, and cap application, ensuring high hygiene standards and reliable operation for bottled water production. Technical Specifications * Capacity: 200–300 bottles/hour (depending on washing cycle settings) * Washing Time: Adjustable from 40 to 120 seconds Dodpfszb Rmvsx Ak Askw * Bottle Size: Standard 18.9 L (5-gallon) bottles * Power Supply: 400 V, 50 Hz * Installed Power: 9 kW * Compressed Air Requirement: 800 L/h, 6 bar, oil-free * Water Supply Requirement: 5,000 L/h, 1" connection, 2–4 bar pressure * Weight: Approx. 800–1000 kg * Minimum Installation Area: 7 m × 3 m The machine is suitable for small and medium-sized bottled water production facilities requiring efficient and hygienic bottle processing.

Year of construction: 1982, condition: used, Throughput: 2000-4000bottles/h, number of rows: 12, the machine is steam-heated and fully functional, an on-site inspection is possible. Dksdpfx Ajzxr Nxok Asw

Condition: used, Year of construction: 2005, For wine and sparkling wine bottles Dkodo Ahlubspfx Ak Ajw Type: WD/ 12 capacity / hour ca.: 6000

Year of construction: 2018, condition: used, A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet. Additional title: single-ended machine for cleaning glass bottles Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs. Processing time: 14,14 min Heating / Cooling: 1.352.712 kJ/h Water: 7,92 m3/h Formats: 0,5 l NRW bottles Material: housing from stainless steel Position: in a cabinet on legs with an enlarged surface area Base construction: sinle-ended machine Features: pre-soaking and lye baths; spray nozzles; bottle conveyor with drives; pumps; top surface serving as a work platform with guardrails; housing; control cabinet; touchscreen display serving as an HMI panel Dodpfx Ajzizyzok Askw

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Dkodpfx Akeyhgnie Aow

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Dkedpfx Aket Ity Dj Asw Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: good (used), Garmak carpet washing machine. Capacity: 500 m2 per day. Width: 365 cm, depth: 290 cm. Dksdpfjz Spz Dsx Ak Aow

Year of construction: 2016, condition: used, Bottle washer for 7000 bottles/h Additional title: Single-ended machine Nominal output: 7000 Bo/h Cycle time: 22 min. Heat up heat consumption: 1785400 kJ/h Heat consumption operation: 455000 kJ/h Power: 29,5 kW Dkedew Tam Nopfx Ak Aew Current: 63 A Voltage: 230 / 400 V Frequency: 50 Hz Water: 3 bar, 2,5 m³/h Compressed air: 6 bar, 40 l/min. Length: 8,81 m Width: 3,46 m Height: 2,8 m Weight: 13000 kg Formats: 0,5 l Euro Operation / Control: PLC control, operating console Material: stainless steel Position: free standing Base construction: Self-supporting housing on adjustable feet Features: PLC control, gearbox, pumps, heat exchanger, label discharge, Layer patterns: 20 bottles/row, 132 rows

Year of construction: 2007, condition: used, A single-ended machine for cleaning glass bottles, with labels removed via a chain. The cleaning solution is steam-heated. Additional title: Single-ended machine Capacity: 17000 bo/h Dkedpfx Ajzg I Efjk Asw Weight: 26400 kg Machine partitioning: chain division: 110 mm Operation / Control: Simatic S7

Condition: used, Year of construction: 1999, Single-end bottle washer. Factory overhauled in 2005. Additional title: one end machine Nominal capacity: 6700 bo/h Control range: 7370 bo/h Number of bottle cells: 1620 pcs. Number of bottle cells per row: 10 pcs. Length: 7790 mm Width: 3450 mm Height: 2950 mm Djdpfx Aoxbn Ivjk Askw Weight: 20000 kg Machine partitioning: Chain division 150 mm, cell division 110 mm Operation / Control: Siemens S 5 Material: Stainless steel Position: Free-standing on spherical feet Base construction: Housing in one-piece block design Features: Bottle insertion and removal finger system, chemical dosing stations with dosing pumps, format parts for inlet and outlet

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1406, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing Dkodszmvgwopfx Ak Aow • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Video recorded 19.3.2026 • Previously in professional denim-finishing production (MASI "Pesumasin No 2") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1407, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine (re-controlled 2014) Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) Djdpfjzmt S Dex Ak Aekw • Previously in professional denim-finishing production (MASI "Pesumasin No 3") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional rigging required (heavy industrial machine, ~10 t). Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Dkedpfxjv Ihgve Ak Aew

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Dedpfs Ah Hgzox Ak Aokw Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Dkedpfx Aoz Rztvsk Asw Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call. Dsdpez D Uuxefx Ak Ajkw

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Djdpfxsv Sa I To Ak Aokw While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Year of construction: 2010, condition: good (used), Ref. -No.: 10322 Manufacturer: EKO PILL Dkedps Ahmuljfx Ak Ajw Type: PMPO 950 K Year of construction: 2010 Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration - Drying heat recovery - Washing - Rinsing / Maintenance - Drying

Year of construction: 2015, condition: good (used), For Sale: Nawi Stainless Steel Bin Washing Machine Make: Nawi Year of Manufacture: 2015 Specifications: - Completely stainless steel - Steam heated - Equipped with infeed conveyor belt, width 1100 mm Dkedpfx Ajyiyxkek Aew - Tilting device with infeed guide - Discharge screening system - Central control cabinet with touchscreen operation - Wash chamber dimensions: 2500x1700x1300 mm - Infeed + outfeed If you have any questions or comments, please feel free to contact us. Price includes disassembly Loading is included. Transport by arrangement Inspection possible on site. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, input voltage: 380 V, - Equipped with a cap elevator feeder - Equipped with a Bünder & Schmitt SOR01-1500R cap sorting system - Number of heads: 9 Djdpfj Ahrtxox Ak Askw - The line produces 230, 300, 350, 460, 500, and 760 ml plastic bottles. Other sizes can be produced upon request. - Maximum capacity: up to 200 bottles per minute / 12,000 bottles per hour.

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Dkjdpfx Aowb E S Iek Asw

Year of construction: 2016, condition: excellent (used), Belimed WD 290 Washing machine / cleaning and disinfection unit This device, made of stainless steel – with an exhaust air condenser (option with a higher design) – is specifically designed for cleaning laboratory glassware, infusion bottles, production parts, and similar items. The WD 290 is available with two automatically operated, vertically moving full-glass sliding doors for visual inspection during the entire processing cycle. Continuous process reliability is also ensured. The machine itself monitors all relevant performance parameters via an independent process data monitoring system. Loading is done manually through a vertical glass sliding door located on the front of the machine. The items to be cleaned (laboratory utensils, laboratory bottles, etc.) are placed on the loading carrier (nozzle car). The nozzle system consists of two rotating external washing arms (top and bottom), through which the individual media, such as washing, rinsing, and cleaning solutions, are passed. The rinsing medium is located externally and fed in depending on the program selection. The WD 290 is equipped with an electric heater for the washing chamber (22 kW) and the dryer (10.5 kW). The usable interior space of 69 x 63 x 80 cm has a capacity of approximately 350 liters (gross: 430 liters). Djdpfx Akjzrfrae Askw Operating consumption values: Potable water approx. 40 l/min Hot water approx. 40 l/min Cold water approx. 40 l/min The system is operated via the panel on the front of the machine. English and German are available as operating languages. By default, 9 pre-programmed cleaning programs are stored.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, Glastronic-made 1600mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. New squeegee rubbers, new bearings. Working direction: left to right. Maximum washable glass height: 1600mm. Number of brushes: 4. Drying fan. Stainless steel cabin. Water heating. Dodpfxez Ngyrs Ak Askw Backlighting. Stop sensor. The machine has been fully inspected, cleaned, and is in perfect working order and can be viewed at our facility!

Condition: used, KEN 2311-HOS Laboratory Dishwasher KEN 2311-HOS is a compact cleaning and disinfection unit. It is used for washing, disinfecting, and drying (optional) surgical instruments, rigid endoscopes, instruments for minimally invasive procedures, anesthesia equipment, abdominal and tubular instruments, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, and glassware. Several versions are available: single-door and double-door (pass-through) models. Pass-through machines are always preferred, as the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-contamination. Dkjdpfxoiuzkms Ak Aow ■ User-friendly control panel – ensures correct operation ■ Option for individual program selection. 4 programs as standard ■ Process indicator bar shows the progress of the program ■ Double temperature monitoring (EN/ISO 15883) ■ Connection option for 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications Power connection 3 x 400 V, N, PE, 50 Hz Connected load/fuse rating 10 kW/16 A Water connection Cold, untreated water: 1, ¾" BSP, 5-30°C, 0-30°dH Water connection Hot, softened water: 1, ¾" BSP, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per cycle 13-14 l Pump capacity 370 l/min Clearance depth 2 doors 560 mm Clearance depth without center panel 510 mm Clearance width without center panel 510 mm Noise level approx. 59-64 dBA (sound pressure) Ingress protection class IP 21 (not suitable for dishwashing) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed from a site that closed and has been stored since, and it was in working order at the time. It appears to be in very good condition. Unfortunately, we do not have the knowledge or the equipment to test the unit further, and therefore, this unit is sold as is, in the condition shown in the pictures. If you would like to test or inspect this unit before purchasing, please contact us at any time to arrange an appointment. You can find more items – new and used – in our shop! International shipping costs on request!