Used Veneer Turner for sale (662)

Condition: good (used), Hotung LK-PW1 Paper Pallet Turner, B1+ Format The machine is like new, fully functional, and ready to use. Technical Specifications: Format: 1280×800 mm Stack height: max. 1340 mm Load capacity: 1000 kg Podpfxezfwwzo Agkopu Device weight: 860 kg 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: good (used), Polar Mohr PW-1 Pile turner This machine is like new, fully functional, and ready to use. Technical specifications: Format: 660x800mm Stack height: 1250mm Pedpfx Aszc Rwkjgkepu Load capacity: 500kg Device weight: 700kg Power supply: 380V Controlled from a control panel, fast operation, hydraulic drive. Noiseless operation. Compact design, space-saving.

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Podpfx Agoyz R Unokjpu Dimensions: 700mm X 1450mm

Condition: used, Premier Pallet Inverter / Turner Model FS1600 Max opening - 1575mm, Min opening 900mm Max capacity load 7,000kg Load tables dimensions 1300mm x 1250mm Cycle time 45 seconds Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure Recover damaged materials from the bottom of a load Replace wood pallets with plastic, aluminum, or other more hygienic pallets Ppodjwkhnqjpfx Agkju Transfer materials from a damaged pallet Change orientation for printing and other general purposes

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Pedjzd A Rdopfx Agkopu Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: excellent (used), Year of construction: 2017, Technical Specifications: Total pressing force 1500 kN Setting range 10 – 100 % Total pressing surface 3100 x 1350 mm Specific pressure at full charge 3,6 daN/cm² (kp/cm²) 6 cylinders 90 mm diameter 400 mm stroke Operating hydraulic pressure 395 bar Daylight height 400 mm Daylights 2 Psdpfezd T Uyex Agkjpu Daylight opening 150 mm 400V 50Kz 3 phase CE 3 pieces heating devices each with 18 kW for heating up the fluid medium water to a working temperature of 130°C.

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Psdpfx Agevvkazjkspu

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Psdpfsvvkblex Agkepu Storage location: Nattheim

Condition: used, Year of construction: 1991, Plate size: 3600 x 1350 mm Psdpfx Aoy Hrzmjgkepu Total pressing force: 160 t Specific pressing force: 3.5 - 5.0 kg/cm² Operating pressure max.: 320 bar Pressure cylinders: 8 x 90 St/DM mm Opening width: 400 mm Weight approx. 8300 kg Dimensions: 4130 x 1520 x 2150 mm Functionally tested = new top plates (gold anodized) Location: Nattheim

Condition: used, Cutting length: 3000 mm Cutting height: adjustable, 0 - 45 mm Saw unit: 1.8 kW Clamping mechanism: operated via handwheel Ppjdpjy Hrzaofx Agkju Location: Nattheim

Condition: used, Year of construction: 1995, Stand-outreach: 630 mm, table model. Veneer thickness: 0.4 - 2.0 mm. Feed rate: approx. 7 m/min. Operating voltage: 230 V. Dimensions: 880 x 370 x 480 mm. Weight: 35 kg. Storage location: Nattheim. Ppsdpfxsy Hry No Agkju

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Plate surface: aluminium Ppjdpfjy A Hkbsx Agkju Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: used, Year of construction: 1992, Cutting length: 3100 mm Workpiece clamping: pneumatic Ppodsyl Tiuopfx Agkou

Condition: used, Year of construction: 1989, Pressing area: 2500 mm x 1100 mm Opening: 400 mm Heating: electric Plate surface: Aluminium, gold anodized Emergency stop: yes Pressing force: 65 t Number of cylinders: 4 Current consumption: 22 A Ppedpfx Asyl Tinjgksu Machine length: 3000 mm Machine width: 1300 mm Weight: 3000 kg

Condition: used, Year of construction: 1976, Pressing area: 2500mm x 1250mm Opening: 360mm Top platen heating: electric Bottom platen heating: defective Platen surface: aluminum, anodized Pressing force: 90t Number of cylinders: 4 Pjdpfx Asx Edl Eegkopu Power consumption: approx. 33A Machine length: 3000mm Machine width: 1500mm Weight: 4000kg

Condition: used, Year of construction: 1997, Column reach: 630 mm Pjdpswbqi Sjfx Agkspu Feed rate: 7 m/min

Condition: used, Cutting length: 3050 mm Workpiece clamping: handwheel Extraction system: yes Pedpfxem H Uxyj Agkspu

Condition: used, Year of construction: 1982, Pressing area: 2200mm x 1100mm Ppjdpozhm Dvofx Agkou Opening: 400mm Heating: electric Platen surface: aluminum Emergency stop: yes, pull-cord Pressing force: 60 tons Number of cylinders: 4 Power consumption: 16kW Machine length: 2500 mm Machine width: 1300mm Weight: 3000kg

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical details: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamps Rear stop Ppsdpfew I Ulpjx Agkju Weight approx. kg: 400 Location: Flörsheim Availability: short notice

Condition: used, Used machine Condition: Fully functional Technical data: Pjdpfxew I U Evs Agkjpu Working length: 3000 mm Handwheel clamping Power unit: 2 kW Availability: Short term Location: Flörsheim

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Ppsdew I Ur Nepfx Agkeu Storage location: Flörsheim

Condition: used, Used machineCutting length 3000 mmwith handwheel clampingAvailability: short termStorage location: Solingen Ppedjw I Uhdepfx Agkeu

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - User-friendly controls - Ideal working height - Large opening - Full access from all four sides - Push-button control - Stop button - Safety cable - EMERGENCY STOP at every location - Timer with acoustic signal - Pressure switch automation Pedey R Haxopfx Agkepu - Automatic temperature control system - Infinitely adjustable stroke limitation - Heavy-duty rack compensation - Energy-saving mode as standard - Switchable side cylinders - Total pressing force: 120 tons - Plate dimensions: 3000x1350 mm - Number of cylinders: 6 - Piston diameter: 85 mm - Max. opening / stroke: 400 mm - Closing time: approx. 16 sec - Heating time to 80°C (from room temperature): approx. 14 min - Maximum permissible operating temperature: 140 °C - Total connected load: 20.1 kW - Hydraulic power: 1.21 kW - Fuse rating: 35 A - Dimensions: 3500x1610x2000 mm - Total weight: 6200 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Used machine Used veneer saw of the company Scheer type FM 2 - 3000 Clamping by handwheel integrated suction unit Psdpswka Rdofx Agkspu Cutting length: 3000 mm movable Availability: short term Location: Röllbach

Condition: used, Used machine Equipment: - Cutting length 2500 mm - With handwheel tensioning Availability: short-term Stock location: 63934 Röllbach Pedpsyncpiefx Agkepu