Band turner buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu3pz230h CEHISA EP-9 Single Sided Edgebander0.4 - 6 mm Banding capacity, automatic strip feed & coil feed magazine, compact Hot Melt glue system, heats up in (12) [...]: 3 mm PVC Guillotine, 3-roll pressure section w/pneumatic positioning; min. panel length 5" (120 mm), min. panel width 3" (75 mm), max/min panel thickness .375" - 2" (8 - 45 mm).Workstations: -- Single-motor end trim with (2) blades. -- Top & Bottom flush & bevel trim unit with 0° to 20... more
6
Homag Panel Sizing & Edgebanding Machine, KF 26/07/A3/25 Make : Homag Model : KF 26/07/A3/25 Serial# : 0-200-03-0005 Year of Mfg. : 2002 Condition : Used, very good conditions Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in in the US till now! Full Tech. Details and Documentation available upon request DESCRIPTION Fixed side on left, movable side on right. Double-Sided mac... more
10

Edgebander Felder G560

More Felder G 560
Tinnamuck, Moate, Co. Westmeath, IrelandIreland
5381 km
2012
excellent (used)
used Edgebander Felder G560 with pre milling unit this machine is in Germany at the moment (not Ireland) Total working hours: 382hrs Total running meters : 13175m Premilling Saw Trimmer G9jhcbxh Radius scraper Glue scraper Buffers Edge thickness: 0,4 - 5 mm, Work piece thickness: 10 - 60 mm, Feed speed: 9 m/min., Table Ø for edging roll: 750 mm, Pre milling cutters: 60 mm, Saw blade Ø : 100 mm, Power od pre millers: 2 x 1,1 kW, Extraction outlet Ø pre milling: 2 x 8... more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more
6

Band saw line LBL-BRENTA Spider 1260 / BE1400

Hardinxveld-Giessendam, NetherlandsNetherlands dealership location
6242 km
1998
good (used)
LBL-BRENTA band saw line, type Spider 1260 / BE1400 Manufacture year 1998 / 19.. The line is composed of: Cross chain conveyor for logs 3 chains, length ca. 6 meters Log loading device Equipped with 2 loading arms and chain turners LBL-BRENTA hydraulic log carriage, type Spider 1260 - length 6 meters - 4 hydraulic headridges - Horizontal opening 1260 mm - Vertical opening 1000 mm - Moving clamps with positions 17 - 167mm - 3 integrated pneumatic log turners - 3 integrated p... more
9

Horizontal 3 head thin cutting bandsaw RHINO SAWYER TS-300

Tussendiepen 39, 9206 AB Drachten, NederlandNetherlands
6264 km
2018
excellent (used)
Horizontal 3 head thin cutting bandsaw, very suitable for flooring industry to cut oak lamella, but also universal cutting with 3 heads Maximum Workpiece Size 310mm (W) x 200 mm (H) Saw Wheel Diameter 31.5" Saw Wheel Width 2" In-feed Speed 0-18 m/min Hi9fi3xx Min. cutting Lamella Thickness 2 mm Main Motor 3 x 22.0 kW Rhino Sawyer band saws are the ideal solution for unlimited application in sawing wood. They are very flexible in sawing various widths and thicknesses. With touchs... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Boaf9v0 HOLZ-HER 1321 Sprint Edgebander with Pre-Milling & Corner Rounding. 0.3 - 15 mm Thickness edgebanding capability (3 mm coil or 15 mm max. strip). -- 6 - 50 mm Panel thickness, workpiece width min. of 60 mm; workpiece Length min. 180 mm; Feed speed 12.5 MPM (41 FPM). -- Programmable Logic Control (PLC) for Edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and [...] can be easily created and recal... more
5

Band Saw - Vertical MÖSSNER-REKORD SM 320

Bünde, GermanyGermany dealership location
6460 km
1976
used
roll diameter 320 mm throat 300 mm workpiece height 200 mm table-size 500 x 500 mm throat in width 310 mm throat arm - height 230 mm band speed 12-375 m/min total power requirement 0,9/1,3 kW weight of the machine ca. 470 kg dimensions of the machine ca. 0,8 x 0,8 x 1,85 m Bjdswkz8 Condition: ready for operation Electric 380 Volt Complete with Stumpf-welding device combined with shear and grinding stone Diverse saw bands From a training workshop - less used. Machine dealer with own... more
1

Vertical Band Saw Wadkin 35/18

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
0vu3diq more


band turner
daily

New machines via email!

Stay updated!
3

Band Saw - Vertical MÖSSNER SM 320

Dreieich, GermanyGermany dealership location
6568 km
1988
used
roll diameter 320 mm throat 310 mm workpiece height 230 mm table-size 505 x 505 mm Ckpp9ullw cutting speed 18 - 562 m/min turning speeds 59 - 1845 U/min saw band length 2550 - 2630 mm voltage 400 V total power requirement 1,3 kW weight of the machine ca. 420 kg dimensions of the machine ca. 0,80 x 0,80 x 1,65 m welding equipment IDEAL grinding motor - Fabr.-No.: 27516 - welding equipment IDEAL - grinding wheel - machine lamp more
5

Ultraschallbanderolierer ATS TANNER US 2000 LB

Krefeld, GermanyGermany dealership location
6365 km
good (used)
ATS US 2000 LB 3yuhxa7if Large magazine mobile Height-adjustable banded digital control ultrasonic welding with 50 mm plastic or force paper belt more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu3qwpnwk CEHISA 404 Edgebander 0.4 - 20 mm (3/4") Edge thickness cap. and also 5 mm PVC banding,Edgebanding height 2.36" (60 mm) max: 5" min. panel length and 3" min. [...] with: Quick Melt compact glue system, automatic strip & coil magazine, guillotine for up to 4 mm thick PVC; 4-roll pneumatically controlled pressure section, each roller individually [...]: -- Double motor end-trim (0.75 HP HF motors), tilt 0° - 10°;. -- Top & bottom flush trim (2 H... more
15

Horizontal Bandsaws HYD-MECH H10A 10" / 254mm Twin Pillar Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. HSA0307115 Capacity Rounds 10"/ 254mm Squares 10" x 10" / 254mm x 254mm Twin Pillar Yes Input 415/3/50 5hp approx Speeds 50-350 sfm Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp and Swarf Screw. Zi8lntk Equipment 10' / 3048mm Roller Tracking Length Machine - 7' / 2133mm. Tracking - 10' / 3048mm Width Machine - 7' / 2133mm. Tracking - 2' 10" 863mm Height Machine - 5' 10" / 1778mm. Tracking - 2' 8" / 813mm Nett we... more
1

Vertical Band Saw Wadkin Unknown

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Gu8ni33r more
2

Band Saw - Vertical MÖSSNER SM 420 / A

Dreieich, GermanyGermany dealership location
6568 km
used
roll diameter 420 mm throat 410 mm workpiece height 265 mm table-size 600 x 600 mm cutting speed 12 - 375 m/min turning speed range 39 - 1230 U/min saw band length 3150 - 3260 mm width of saw-band 3-16 mm voltage 380 V total power requirement 1,7 kW weight of the machine ca. 620 kg dimensions of the machine ca. 1,00 x 0,80 x 1,90 m Qvr0fanwh welding equipment IDEAL air blow equipment - S/N: 21486 - 74 / 41 - IDEAL Welding unit - Grinding wheel - Machine lamp more
5

Band Saw - Vertical KASTO SSB 260 VA

Mönchengladbach, GermanyGermany dealership location
6371 km
used
cutting diameter:260 mm saw band length:3912 mm Bb3xtdsemz cutting width:260 mm cutting range:260 x 260 mm workpiece height:260 mm throat:350 mm cutting speed:15 - 125 m/min roll diameter:500 mm total power requirement:4 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:1,4 x 1,8 x 1,9 m Machine with roller infeed stand - chip conveyor - chip tank more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbu3qdncoi CEHISA BRYKO PLUS, ..."Compact" Edgebander. 0.4 - 2 mm Edge thickness cap. and 40 mm panel thickness; 3" min. width and 4-3/4" min. panel length. -- Equipped with: Quick Melt Teflon coated glue pot for granular hot-melt adhesive; Heavy Duty guillotine for up to 2 mm thick PVC. -- Features integrated Operator PLC controls for (10) programs, "short-cut" function keys and a LCD [...]: -- Double Blade End Trim with HF motor - 12,000 RPM; Top & b... more
2

Band Saw - Automatic - Horizontal BTM 560 A

Bühl, GermanyGermany dealership location
6593 km
1999
used
cutting diameter 560 mm saw band length 8020 mm cutting width 1,1 mm capacity 90 degrees: round 560 mm capacity 90 degrees: square 560 x 560 mm dimensions of saw-band 8020 x 1,1 x 54 mm feed length 550 mm feed length: multiple 9999 mm cutting speed 17 - 127 m/min control CEB, SAW III total power requirement 7,5 kW weight of the machine ca. 7,6 t range L-W-H 4,30 x 2,40 x 2,56 m Uqvwqkgcj acc.: roller track 3000 mm, roller track 1800 mm, roller track 850 mm, chip converyor, coolant more
2

Colant tank with Band Filter Kowap AG KA400

Meinisberg, SwitzerlandSwitzerland
6617 km
2006
excellent (used)
Tank capacity Approx. 400ltrs. Supply pump no.1 Type MTA3-180 Supply pump no.2 SPK2-19/19 Filtering capacity Oil, max. 50ltrs./min. Hmwl9heh Power supply 3x230V/50HZ Colour RAL 7035, grau Dimensions approx. 120x110x100 cm more
1

Vertical Band Saw Wadkin 35/18

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Hpprjlcqs more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant voltage 400 V total power requirement 2,2 kW weight of the machine ca. 700 kg 3gtisvayf dimensions of the machine ca. 2,60 x 1,75 x 1,70 m - Fab. No.: 0003000633 more
6

Edge banding machine OTT Atlantic V 6-F

Hohenstein-Bernloch, GermanyGermany dealership location
6691 km
2000
used
6 mm Bhyacm7 workpiece width - max. 42 mm length 5300 mm more
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbu3nebkf8 HOLZ-HER Sprint 1310-1 Edgebander. Cartridge Glue System (1906), 8 mm edge thickness cap., Automatic magazine coil & strips (1903), 3 mm PVC cap. pneumatic guillotine for coil [...]: -- Double motor end trim (1918), chamfers 0° - 10°(0.22 kW - 9,000 RPM motor ea.). -- Universal Top & Bottom Trim (1942) for bevels from 0°- 15°, allows simultaneous bevel & profile trimming (1 HP - 22,000 RPM motor ea.); trim motors are 0.6 kW HF - 300 Hz. -- To... more
1

Band Saw - Vertical THIEL 19

Bühl, GermanyGermany dealership location
6593 km
used
throat 480 mm workpiece height 220 mm table-size 750 x 650 mm Lwbcb roll diameter 530 mm dimensions of saw-band 3425/3725 x 6/19 x 0,85 mm cutting speed 10 - 154 m/min table - inclinable nach 2 Seiten total power requirement 1,1 kW range L-W-H 1,60 x 0,65 x 2,00 m = vertical bandsaw, tilting table swivelling in 2 planes more
6
cutting diameter 260 mm saw band length 2660 mm cutting width 400 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 160 x 260 mm capacity 45 degrees: square 160 x 160 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm material feed length 500 mm saw band feed 17-120 U/min dimensions of saw-band 2660 x 25 x 0,9 mm drive saw-band 1,5 kW D8yb9qmp3 drive hydraulic 0,25 kW total power requirement 1,75 kW weight of the mac... more
5
total power requirement:4,2 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 2,5 x 2 m saw band length:4400 mm cutting speed:15 - 150 m/min work height max.:750 mm capacity 45 degrees: round:rechts 330 mm capacity 45 degrees: flat:rechts 320 x 335 mm capacity 45 degrees: flat:links 305 x 335 mm capacity 45 degrees: round:links 305 mm capacity 90 degrees: flat:500 x 335 mm capacity 90 degrees: round:335 mm cutting range 30° flat:rechts 170 x 335 mm Cnb8uaxs Cutting area at ... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu3m0qer7 HOLZ-HER SPRINT 1310-1 Edgebander (4 Stations). Cartridge Glue System (1906), 3 mm edge thickness cap., Automatic magazine coil & strips (1903), 3 mm PVC cap. pneumatic guillotine for coil [...]: -- Double motor end trim (1918), chamfers 0° - 10°(0.22 kW - 9,000 RPM motor ea.). -- Universal Top & Bottom Trim (1942) for bevels from 0°- 15°, allows simultaneous bevel & profile trimming (1 HP - 22,000 RPM motor ea.); trim motors are 0.6 kW HF - 30... more
3
cutting diameter 500 mm capacity 90 degrees: square 500 x 500 mm saw band length 6900 mm dimensions of saw-band 6900 x 38 x 1,3 mm feed length 600 mm feed length: multiple bis 5999 mm cutting speed 18 - 90 m/min height of material-table 700 mm total power requirement 5,0 kW weight of the machine ca. 4,0 t dimensions of the machine ca. 3,70 x 2,30 x 2,20 m Uqvtq8nz9 Accessories: coolant - 2-column-guided - more
6
cutting diameter 305 mm saw band length 5620 mm cutting width 305 x 380 mm cutting speed stufenlos 16-90 m/min total power requirement 7,2 kW single feed stroke 10-510 mm multiple stroke until 4590 mm main drive 5,5 kW hydraulic motor 1,5 kW coolant pump 0,12 kW dimensions of saw-band 5620 x 34 x 1,1 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 2,2 x 3,1 x 1,80 m Condition: good Electric 380 Volt CNC-control Cooling equipment Diverse sawbands Roller conveyor Chi... more
3

Gummi Gurtband

Wiefelstede, GermanyGermany dealership location
6385 km
used
9dmztbzai more
6

band saw Centauro 450

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
1980
good (used)
Type: 450 Weel diameter 450mm Motor power: 1,5kW Badnuvooxc year of construction: 1980 Location: Warehouse / 82281 Herrnzell more
1

BANDSÄGEVOLLAUTOMAT FORTE SBA 240

Bruchsal-Büchenau, GermanyGermany
6601 km
1975
good (used)
BANDSÄGEVOLLAUTOMAT FORTE SBA 240 - 19-03-033 Lieferzeit: sofort Gvonfk Nummer: 19-03-033 Hersteller: Forte Typ: SBA 240 MASCHINENDATEN Baujahr: ca. 1975 L x B x H: ca. 1900 x 1600 x 1650 mm Gewicht: ca. 1000 kg Guter Allgemeinzustand TECHNISCHE DATEN Sägebandabmessungen: ca. 3660 x 27 x 0,9 mm Schnittbereich: Rund: ca. Ø 250 mm Vierkant: ca. 250 x 250 mm Flach: ca. 270 x 250 mm Automatischer Materialvorschub: ca. 3 - 400 mm Mehrfachvorschub: Nein Materia... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glyz009gg CEHISA "EP-9" SINGLE SIDED EDGEBANDER0.4 - 6 mm Banding capacity, automatic strip feed & coil feed magazine, compact Hot Melt glue system, heats up in (12) [...] with: -- 3 mm PVC Guillotine, 3-roll pressure section w/pneumatic positioning; min. panel size: 4-3/4" Length x 3" width x 8 - 45 mm [...] Stations: Single-motor end trim with (2) blades -- Top & Bottom flush & bevel trim unit with 0° to 20° tilt (0.75 HP ea. motor). -- Top & bottom ... more
4

Band Saw - Vertical MOESSNER SFF / 501

Bremen, GermanyGermany dealership location
6424 km
1977
used
roll diameter:500 mm throat:485 mm workpiece height:380 mm table-size:750 x 800 mm Vsiw03 cutting speed:15 - 940 m/min saw band length:3920 - 4050 mm engine output:4,0 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1,2 x 0,9 x 2,1 m more
5

Band Saw - Vertical MÖSSNER-REKORD SSF 420

Bünde, GermanyGermany dealership location
6460 km
1961
used
roll diameter 420 mm throat 410 mm work height max. 265 mm saw band length 3200 mm cutting speed 10 - 1200 m/min table-size 600 x 600 mm 29lyphm saw band width 3 - 16 mm Drive 2,2 kW weight of the machine ca. 600 kg dimensions of the machine ca. 0,9 x 0,65 x 1,9 m Condition: ready for operation Electric 380 Volt Swiveling table 15° saw band welding attachmend IDEAL Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1
cutting diameter 400 mm capacity 90 degrees: square 400 x 400 mm saw band length 5800 mm dimensions of saw-band 5800 x 38 x 1,3 mm feed length 600 mm cutting speed 18 - 90 m/min height of material-table 500 mm total power requirement 5,0 kW weight of the machine ca. 2,7 t range L-W-H 2,50 x 2,92 x 2,10 m Lwbdj acc.: chip conveyor, coolant more
5

band saw VEB 63

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
good (used)
Type: 63 Weel diameter 630mm Motor power: 2,2kW automatic motorbrake year of construction: ca. 1985 3f8z0nypq Location: Warehouse / 82281 Herrnzell more
3
VERTIKAL-BANDSÄGE PRVOMAJSKA SU - 4 - 19-02-009 Lieferzeit: sofort Nummer: 19-02-009 Hersteller: Prvomjska Typ: SU - 4 MASCHINENDATEN Baujahr: ca. 1985 L x B x H: ca. 1500 x 1300 x 1900 mm Gewicht: ca. 650 kg Guter Allgemeinzustand TECHNISCHE DATEN Sägebandlänge: ca. 3200 - 3400 mm Sägebandbreite: ca. 3 - 20 mm Bcxoovj3zh Max. Einbauhöhe: ca. 280 mm Ausladung: ca. 400 mm Tisch neigbar: ca. +15 / -45 Grad Antriebsleistung: ca. 2,2 kW Schnittgeschwindigkeit ... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ne7hb HOLZ-HER 1303 UNO Edgebander0.4 - 3 mm Edge Cap; 3 mm edge thickness cap.; 6 - 50 mm panel thickness, 60 mm min. panel width and 180 mm min. [...] with: -- Semi-automatic magazine coil & Strips (1806-1). -- Cartridge glue system (1906M). -- 3 mm PVC cap. pneumatic guillotine for coil cutoff. -- 2-Roller pressure section w/electronically controlled and feed speed synchronized drive roll. Workstations: -- Double motor end trim, chamfers 0° - 10... more
5

Band Saw - Automatic - Horizontal KASTO Twin A4

St. Ingbert, GermanyGermany dealership location
6503 km
2000
used
cutting diameter:400 mm saw band length: mm cutting width: mm speed:20 - 110 m/min capacity 90 degrees: square:400 x 400 mm capacity 90 degrees: round:400 mm capacity 90 degrees: flat:400 mm Hqieclhdc length:1290 mm width:2490 mm height:Oberteil in Höchststellung 1911 mm adjustment of height - one roll:Oberteil abgesenkt 1721 mm motor capacity:4 KW dimensions of saw-band:5090 x 41 x 1.3 mm total power requirement:7 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,74 x 2,18 x ... more
3
Anleimaggregatpatrone; Printing station; Flush trimming top- down, each with 1.1 kW motors, solid strips up to 20 mm. Whtpw8cqo more
6
Setting machine for CV band saw blades up to 130mm Bcm7weurph -hand and motor drive -Demonstration in our company and instruction -with warranty more
6

edge bander Brandt KD87/2-CF

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
1999
good (used)
Type: Optimat KD87/2-CF used machine edge thickness max. 8mm Workpiece thickness: 8 to 45mm Feed rate: 12m/min units - pre milling unit - quick heating - cutting knife - Double-End trimming unit - Buendigfraesstation Hvl3k3h - Feinfraesstation chamfer / radius with changing engines - Radius scraper - flat scraper - swabbel All units pneumatically adjustable by PLC Year of construction: 1999 location: Warehouse / 82281 Herrnzell more
1

VERTIKAL-BANDSÄGE PEHAKA SH 6.3-33

Bruchsal-Büchenau, GermanyGermany
6601 km
1976
good (used)
VERTIKAL-BANDSÄGE PEHAKA SH 6.3-33 - 19-02-004 Lieferzeit: sofort Nummer: 19-02-004 Bcxolv8eq7 Hersteller: Pehaka Typ: SH 6.3 - 33 MASCHINENDATEN Baujahr: ca. 1976 L x B x H: ca. 1400 x 800 x 1900 mm Gewicht: ca. 650 kg Guter Allgemeinzustand TECHNISCHE DATEN Sägebandlänge: ca. 4400 - 4500 mm Sägebandbreite: ca. 6 - 35 mm Max. Einbauhöhe: ca. 300 mm Ausladung: ca. 600 mm Tisch neigbar: ca. +/- 15 Grad Antriebsleistung: ca. 3 kW ZUBEHÖR • Sägebandschleifei... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bcnguh7knh HOLZ-HER SPRINT 1310-1 Edgebander (4 Stations). Cartridge Glue System (1906), 8 mm edge thickness cap., Automatic magazine coil & strips (1903), 3 mm PVC cap. pneumatic guillotine for coil [...]: -- Double motor end trim (1918), chamfers 0° - 10°(0.22 kW - 9,000 RPM motor ea.). -- Universal Top & Bottom Trim (1942) for bevels from 0°- 15°, allows simultaneous bevel & profile trimming (1 HP - 22,000 RPM motor ea.); trim motors are 0.6 kW HF - 3... more
2
cutting diameter 350 mm saw band length 3900 mm 77rtl8jef cutting width 0,9 mm cutting range - flat - 395 x 240 mm dimensions of saw-band 3900 x 25 x 0,9 mm total power requirement 1,75 kW weight of the machine ca. 0,6 t dimensions of machine 2,05 x 1,78 x 1,5 m - with feed rolls - - with mitre cutting - Accessories: roller track 4000 mm, length stop with end switch for cutting lengths up to 1600 mm, coolant more


band turner
daily

New machines via email!

Stay updated!

to

to

Edit search
BAND TURNER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close