Used Banding for sale (3,804)

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. Kodpfx Akovcyw Ae Ajdr position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Kedpfx Asztazfok Aedr Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2013, Used semi-automatic band saw from FMB Type: Omega Capacity: 240 mm Ksdpfx Aszvyqrek Ajdr Double miter cut capability Year of manufacture: 2013 Includes roller conveyor

Condition: good (used), Year of construction: 2010, Used semi-automatic band saw from Bomar Type STG 440 DGH Capacity at 90 degrees: ø 440 mm / flat: 610 x 440 mm Mitre cutting on two sides Kdodpozvyizefx Ak Aor Includes a 6-meter infeed and outfeed conveyor with an analog measuring system (not shown in the picture).

Condition: good (used), Used band saw from Bewo Kjdezvyf Ajpfx Ak Ajdr Model MOD 250 Capacity 200 x 250 mm Manually operated

Condition: used, Year of construction: 1972, workpiece height 670 mm | throat 785 mm roll diameter 800 mm cutting speed 26- 2000 m/min dimensions of saw-band 6500 mm power requirement 11 kW table-size 900 x 900 mm range L-W-H 2,24 x 1,1 x 2,9 mm weight of the machine ca. 2,3 t Machine from a university. Very good condition Kedpfszvq A Ssx Ak Aedr Equipment: - welding station - grinding stones

Condition: used, Year of construction: 2019, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg Kjdpfx Akezvhkms Asdr dimensions of the machine ca. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIE) - With miter cuts from 45° right to 60° left * Mitre adjustment via a large turntable - MEP EVO microprocessor control for managing all functions * Front right, swiveling - Optional manual or automatic lowering of the saw frame * Stepless adjustment of the saw frame lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioningâ??includes digital display - 2 saw blade speeds - Coolant system - 1 angle stop - Chip removal brush - Machine base frame with forklift pockets - Operating instructions in German - Replacement saw bands Semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw frame - Electro-hydraulic lifting of the saw frame - Electro-hydraulic opening of the vise *Optional equipment: - 2000 mm feed roller conveyor - 2000 mm discharge roller conveyor, including stop

Condition: used, Year of construction: 2014, cutting diameter 305 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm Kedpfxozu A R Eo Ak Asdr 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 600 kg dimensions of the machine ca. 1700 x 1500 x 1950 mm Features: - Semi-automatic operation via automatic saw frame lowering - Miters: left 60°, right 45° - 2 speeds: 40 and 80 m/min - Solid material support table - Operatorâ??s manual

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Thin slicing from 2 mm material thickness Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Kjdezvflnspfx Ak Asdr Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Carbide or stellite saw blades for optimal cutting performance Maintenance-friendly design and easy service

Condition: excellent (used), Year of construction: 2016, cutting height (max.): 560 mm, cutting width (max.): 560 mm, Equipment: CE marking, KASTOwin A 5.6, manufactured in 2016, available for immediate delivery from stock. Kdodpozhtv Eofx Ak Aer - Currently undergoing refurbishment – see photos, including all repairs and a major inspection. - Additional chip conveyor, zero-point start, see attachments.

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Pre-milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic press unit 1816 - Trimming unit 1822 Kodezk Nlhspfx Ak Aodr - Milling unit 1942 M (radius, chamfer, flush) - Blower nozzle, complete - Scraper unit 1929 - Chip collection box - Surface scraper, 1964 - Exhaust hood set - Complete set of protective covers - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm - Edge banding height, max.: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: available shortly Location: Röllbach

Condition: good (used), Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Weight 850 kg Kdsdpfx Aozvq Eyek Asr

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Kedpfszu T Sgox Ak Ajdr Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: used, Technical details: dimensions of saw-band: 5750 mm throat: 605 mm workpiece height: 460 mm max. table load: 250 kg table - inclinable: 15 -30 Grad band speed: 27 - 2200 m/min table height: 1125 mm Table dimensions: 740 x 785 mm motor capacity: 5,5 kW machine weight approx.: 1750 kg dimension machine approx.LxWxH: 1,82 x 0,97 x 2,55 m Machine is sold without electrical control cabinet! This machine was integrated into a production system and operated as part of a larger manufacturing process. The Mössner Rekord SSF 630 is a heavy-duty vertical industrial band saw designed for metal and special materials. It belongs to the renowned REKORD series by Mössner (Germany) and is considered an extremely robust and precise machine for workshop and industrial applications. The SSF 630 is suitable for sawing: ·Steel ·Stainless steel ·Aluminum ·Tool steel ·Plastics Kodpfxsy Rm T Ej Ak Ajdr · Special materials *

Condition: used, Year of construction: 1982, Technical details: dimensions of saw-band: 3920 - 4050 mm throat: 500 mm workpiece height: 400 mm table - inclinable: 15 - 30 Grad Cutting height: 400 mm band speed: 15 - 940 m/min Table dimensions: 800 x 820 mm mm machine weight approx.: 1000 kg dimension machine approx.LxWxH: 1,3 x 1,3 x 2,2 m Kdjdpoyzpknjfx Ak Aer

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW Kodpoy E Hynjfx Ak Aodr machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 4310 mm saw band width: 27 mm cutting range 90 degrees: round: 260 mm cutting range 90 degrees: square: 400 mm Kdsdpfxey Dc N Ae Ak Aor band speed: 17 - 110 m/min electrical connection: 400/50 V / Hz. total power requirement: 4 kW machine weight approx.: 1,22 kg dimension machine approx.LxWxH: 2,4 x 1,0 x 2,0 m dimensions L x W x H: 3,0 x 0,4 x 0,8 m SBA 260/400 U = Fully Automatic Version ·Fully automatic sawing operation ·Automatic shutdown after completion of the cut ·Various accessories included (saw blades) ·Roller conveyor included *

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Type: Optimat KTD 720 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Kdsdpfxezuzlbs Ak Aer

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track Ksdpfx Aszuyqisk Aedr - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit Ksdpfx Aszuyp Eek Ajdr - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm Kodezuyprjpfx Ak Aodr - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Kjdpfx Akezuypls Asdr Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display Kodpfezuyk Nox Ak Ajdr - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar Kdedozuykvspfx Ak Ajr 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2019, Edge banding machine Manufacturer: SCM Type: Minimax E10 Year of manufacture: 2019 Technical data Edge thickness (strip material): 0.4 - 3.0 mm Edge thickness with shear cutter at 80 mm edge height: 0.4 - 1.5 mm Edge thickness with shear cutter at 50 mm edge height: 0.4 - 2.5 mm Edge thickness with shear cutter at 45 mm edge height: 0.4 - 3.0 mm Edge height: 10 - 84 mm Workpiece thickness: 8 - 80 mm Minimum workpiece width: 50 mm Minimum edge length: 210 mm Minimum inner radius (concave) at 0.4 mm edge: 25 mm Minimum outer radius (convex) at 0.4 mm edge: 5 mm Feed speed: 4 / 8 m/min Processing temperature: 140 - 220 °C Edge feed Integrated shear cutter for cutting edge material from the roll. Roll table for holding roll material. Suitable for ABS edges, melamine edges, veneer edges, and other pre-fabricated edge strips. Gluing system Teflon-coated glue tank below the table top. Continuous glue circulation to prevent glue deposits. Fast heating time of approx. 7 minutes. Standby function with timer. Glue tank capacity: 1.5 liters. Pressure system Motor-driven glue application roller. One free-running pressure roller. Foot pedal for start and stop control of the working cycle. Ksdezuykpjpfx Ak Aodr Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.