Used Banding for sale (3,566)

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm Gedpfsc Tmygsx Afnsbh feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Gjdpfjdcd Dljx Afnobh Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: ready for operation (used), Year of construction: 2012, Cutting range round: 240 mm flat (W x H): 310 x 200 mm mitre cut right at 45° round: 175 mm flat: 170 x 170 mm at 30° round: 110 mm flat (W x H): 105 x 105 mm mitre cut left at 45° round: 150 mm Gjdpfx Aeyff Icefnsbh square (W x H): 135 x 135 mm Bandsaw blade dimensions: 2700 x 27 x 0.9 mm Bandsaw drive, frequency-controlled: 16 - 120 m/min Drive: 1.1 kW Electrical connection: 400 V, approx. 2 kW Weight: 490 kg Space requirements (W x L x H): 940 x 1300 x 1900 mm

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Gbjdpfx Afov Dg A Ujnoh Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication Gbodpfedibw Aox Afneh upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Gbedpfx Ashy Tlrofnsh Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating Gsdpjc S Di Rjfx Afnsbh edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) Gbjdpfxjl D Rp Ej Afneh HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Gjdpfx Afolc Ewienobh Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm Gsdjfbr S Repfx Afnebh max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1986, functionality: fully functional, overall weight: 2,000 kg, cutting range round steel at 90°: 260 mm, cutting range square steel at 90°: 260 mm, Specifications Model: HBP260A Machine type: horizontal band saw Cutting capacity: up to approx. Ø 260 mm (round steel) / 260 × 260 mm (square) Blade speed range: ~17 – 120 m/min Saw band dimensions: approx. 4,100 × 32 × 1.1 mm Machine weight: approx. 2,000 – 2,200 kg Power supply: 400V Fully automatic high-quality saw. Gbedjyh U Hqopfx Afnoh Supplied complete with roller conveyor. Inspection recommended.

Condition: used, Year of construction: 2010, Vertical Metal Band Saw Manufacturer: Bauer Model: VG 450 L Year of manufacture: 2010 Cutting Capacity: 90° round = 450 mm 90° flat = 450 x 620 mm 45° left = 450 x 420 mm 45° right = 450 x 390 mm 30° right = 450 x 250 mm Material feed height: 930 mm Saw band wheel diameter: 450 mm Saw band dimensions: 4,450 x 34 x 1.5 mm Cutting speed: 35, 70 m/min. Special accessory available with stepless adjustment Saw blade guide: Deflection rollers + carbide jaws Manual material clamping via handwheel and trapezoidal spindle Saw frame feed: hydraulic cutting pressure control Material feed: manual Spray unit Compressed air supply: min. 2 bar Designed for miter cuts Saw motor: 2.2 kW Gbsdeyfib Hopfx Afnoh Coolant pump: 0.1 kW Hydraulic pump: 0.37 kW Required space (L/W/H): 2,150 x 1,400 x 2,250 mm Weight approx. 900 kg Operating manual ä92126

Condition: excellent (used), Saw blade dimension 4910x34x1.1 mm Cutting speed 20-120 m/min. Feed length single stroke 750 mm Max. Feed length 9999 mm Electrical equipment Supply voltage ~3x400V,50Hz,TN-C-S/TN-C Total connected load 8.5 kW Max. Fuse rating 25 A Protection class IP 54 Sound pressure level Production 280 78 dB Gbedpjtp Tcgsfx Afnoh Drive unit Type MDERAXX 100-32J B14 Supply voltage ~3x400V,50Hz Power 3 kW Nominal motor speed 1420 m/min. Hydraulic unit Type 92.001.048 (731-0507) Power 6.5 MPa/2.2 kW Coolant device Type 3COA4-12 Volume of coolant 40 dm3 MICRONISER possible Machine size LxWxH 2370x1600x2050 mm Machine weight Weight 1800 kg

Condition: new, Electrical voltage 400 / 440 V Gjdpfx Afjd R Uzzenebh Frequency 50 / 60 Hz N° Phases 3 / 3 Ph

Condition: used, Vertical Bandsaw WESPA Type AS 4 Serial No. 61520 Year of manufacture: approx. 1975 Wheel diameter: 400 mm Throat depth: 380 mm Table size: 610 x 610 mm Maximum cutting height: 245 mm Saw blade length: min. 2800 - max. 3000 mm Blade speed: 25-550 m/min, stepless Power supply: 400 Volt, 50 Hz - Infinitely variable blade speed via 2 gearbox stages and stepless belt drive - Saw table with longitudinal adjustment via handwheel and leadscrew - Saw table tiltable - Adjustable fence for the saw table - IDEAL BS 0-16 blade butt welding machine - Blade shear Gbedpjydqfkofx Afnoh - Grinding stone for grinding the weld seam - Air compressor with blow nozzle - Machine lamp Required space (L x W x H): 1100 x 800 x 1810 mm Weight: 530 kg Good condition

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm Gjdjglui Aspfx Afnobh tooth pitch 20 - 50mm

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Gbjdpsd Sr Siefx Afnoh

Condition: refurbished (used), LBL Brenta chipper CT 700 Max. Cutting depth = 150mm. Max. Cutting height = 650mm 9 blades Free center disc, overheating protection Clearance = 800mm Fast, precise positioning thanks to servo motor Gbjdpfoucp N Aox Afneh

Condition: excellent (used), Exotic log band saw - Feeding cross conveyor with feeder - Brenta band saw carriage, type Bamat 1600 opening 1600 mm, 5 trestles, 3 log turners - circular cut-off saws, 2x 13 kW - Brenta band saw, type Irpad 1600 1600 x 240 mm, saw blade width 260 mm - take-off roller table - roller conveyor with cross haul-off Gsdpfjkzg Ihjx Afnebh - cross conveyor - roller table

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Godpfxjucnt He Afnjbh Roller diameter 1100mm With swivel table for diagonal cut disassembled from our warehouse in 23936 Grevesmühlen

Condition: good (used), Artiglio ST 80 band resaw Gbjdpfx Asucnt Tofnsh -technically tested and newly painted

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), throat depth: 400 mm, Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Gedpfx Afexpymaonjbh Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Year of construction: 2018, Horizontal bandsawing machine Make: JAESPA Model: Compact 2.8 Year of construction: 2018 TECHNICAL DETAILS: Gedpfx Aoudb Sfofnsbh Automatic band saw - horizontal Cutting diameter 280 mm Saw blade length 5080 x 34 x 1.1 mm Cutting area flat 330 x 280 mm Cutting width 330 mm NC control Feed 460 mm Cut-off lengths 9999.9 mm Speed 15 - 120 m/min Machine weight approx. 2.3 t Dimensions approx. 3250 x 1580 x 2050 mm Column design for heavy-duty, industrial use o Intuitive NC control of the machine via PLC WAGO and 7" color touchscreen. Frequency-controlled, infinitely variable belt drive Saw arm with highly sensitive feed movement via servo motor and ball screw ball screw Backlash-free linear guides in both columns Hydraulic material clamping with long-stroke cylinder in front of and behind the saw blade saw band Clamping vice and lifting jaws open on both sides with infinitely adjustable clamping pressure clamping pressure Material feed via servo motor and ball screw drive in chain dimension the repeating operation is clocked. Unlimited material feed length Fully hydraulic saw blade tensioning Automatic saw blade guide arm adjustment Fully equipped with chip conveyor

Condition: good (used), Year of construction: 1986, Behringer fully automatic band saw, fully functional. Old, robust technology without sensitive electronics. Max. cutting capacity at 90°: 500 mm. Motor power: 5 kW. Saw blade length: 6900 mm. Machine has already been properly dismantled and stored. Gbsdpfx Aeydnl Ijfnjh

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Motor power: 0.22 kW Power connection: 400 Volt, 50 Hz Gbodpfxsxcbppo Afnsh - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg