Used Banding for sale (3,891)

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Laodpfx Aheu Ekbnjaeh Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm Lsdexaarkopfx Ahasah capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: Laodpfx Aexaatbjhajh - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions Laedpoxaav Aofx Ahaoh * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm Ledpfx Ajxaa Ewohasah cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MPE CNC total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, cutting width (max.): 900 mm, total height: 2,600 mm, total length: 1,700 mm, total width: 1,800 mm, overall weight: 800 kg, saw band length: 4,600 mm, saw band width: 25 mm, table width: 1,800 mm, throat depth: 900 mm, working height: 800 mm, Band saw for cutting wood and other wood-based materials, and more. Cast iron construction. Working wheels 900 mm. Cutting width 900 mm, cutting height 800 mm. Cast iron construction, weight 800 kg. Condition after complete overhaul. Equipped with saw blade. Covers included. Laodpfoxl Svxox Ahajh

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) Laedpfx Aswmdbrjhajh up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: repair required (used), Cutting capacity round Ø 300 mm Cutting capacity rectangular 305 x 305 mm Lsdpfjwqcahsx Ahasah Saw blade speed approx. 25-108 m/min Saw blade drive 4 kW Incl. hydraulic saw blade tensioning Incl. coolant system Incl. various replacement bands

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Laedpjwqw Tvsfx Ahajh Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Ljdpfx Aew A Ruqshaoah Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with Ledpfx Ahewm Rqtsajah a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Laodpfjyi Unaex Ahaeh Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Max. vice opening: 510 mm Saw band dimensions: 5090 x 34 x 1.1 mm

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Lodpfxsycvcxj Ahaoah

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 14200 € 272.64 € Schwenkrahmen 4160x34x1,1 mm 20-100 m/min 320 mm 320 mm 610x320 mm rund 260 mm, quadrat 225 rund 320 mm, quadrat 320 rund 320 mm, quadrat 320 740 mm 0.37 kW 2.2 kW 0.12 kW 2100 mm 1200 mm 1350 mm 1150 kg rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch Laodpfx Ajynm Ntshash hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61900 € 1169.91 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 540 mm 540 mm 670x540 mm rund 540 mm, quadrat 540 rund 510 mm, quadrat 510 rund 270 mm, quadrat 250 805 mm 2.2 kW 4 kW 0.12 kW 3100 mm 2350 mm 2150 mm 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH Lodpfeynm Rqox Ahaeah OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27600 € 527.16 € Doppelsäulenführung Laodpfxeynnhqo Ahaoh 5750 x 41 x 1,3 mm 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge banding machine (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Gluing technology used: EVA glue granules GlueJet (exchangeable station), L-Tronic laser (exchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), rounding units (2 motors, digitally adjustable), sanding units (profiled and flat), indexing unit (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edge banding thickness: 15 mm Maximum edge banding thickness in roll form: 3 mm Maximum edge banding height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece inlet height: 877 mm Machine weight: 4200 kg Minimum electrical connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electrical height adjustment: YES Top belt pressure: YES Maximum feed rate: 25 m/min Feed rate adjustment, stepless: YES Heating zone: YES Spray nozzles: YES Lsdpfxjz I R Sno Ahaeah Machine documentation: YES Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: excellent (used), Year of construction: 2003, Kasto Kastotec AC3 full automatic sawing machine Year: 2003 Technical details: Max cutting diameter 90° 330 mm Max Cutting flat 90° 430 x 330 mm Cutting speed Vario 12 - 120 m/min Lasdpfx Aszxdd Iehaeh Blade size 6830 x 41 x 1,3 mm Blade motor power 5.5 kW Dimensions 4245x2140x2310 mm( including the swarf conveyor ) Max workipece weight 2275 kg Machine weight 3300 kg Operationg hours: 15724 Saw on hours: 12839 Under power in our warehouse, ready to use. Video available upon request!

Condition: used, Omef 2-Belt Vertical Side Grinder for straight or shaped parts. Laodpfjzxg Ensx Ahajh Motor power: traction 2.2 kW with electronic inverter 4 polishing motors of 4 kW each

Condition: used, Year of construction: 1948, functionality: limited functionality, We are offering this uninspected Gottfried Wachtberger band saw, manufactured in 1948, for sale. The machine vibrated during operation. It has not been tested further. Lodsz Affzjpfx Ahaeah The listed price is 300 euros (negotiable, net). If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2001, Fully automatic bandsaw Müller HBA 260 CNC (Dais + Partner) with minimal feed system and roller conveyor. Laedpfx Ahez Afgfjaoh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 820 mm, total width: 1,010 mm, total height: 2,030 mm, For sale is a bandsaw from C.E. Reich. Type: Industrie 500 Year of manufacture: 2018 Saw band dimensions: 3800 mm x 16 mm Band speed: 30 m/sec. The Reich Industrie 500 bandsaw is a bandsaw with a fixed, welded table, portion stop, material pusher, and sliding table, suitable for cutting food products such as meat, bones, sausage, cheese, or fish. The food products can be processed fresh or frozen. Ledpfx Aez Aibtehaeah

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 350 mm, cutting width (max.): 520 mm, control type: manual, roller diameter: 540 mm, pivoting range: 15 °, actuation type: manual, rotational speed (max.): 950 rpm, total height: 1,970 mm, total length: 870 mm, total width: 620 mm, overall weight: 234 kg, table height: 840 mm, Equipment: documentation/manual, motor brake, • Heavy-duty design with high weight for maximum smooth operation • Cast-iron flywheels with rubber coating and cleaning brush • 3-roller precision saw blade guide as standard, located at the top and bottom • Large cast-iron saw table, swiveling from 0° to +15° with a ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Particularly quiet and precise operation thanks to the torsion-resistant machine housing • Large cast-iron parallel guide with round bar guide, easily adjustable • Saw blade tension indicator Lsdpfjzvd Egsx Ahaoah • Self-braking motor

Condition: good (used), Year of construction: 2001, Semi-automatic Bomar STG 330 DGH saw - Cutting dimensions: 330mm x 510mm Lsdpfx Ahozur Duoaeah - 60-degree mitre cut - Variable cutting speed - Year of manufacture: 2001

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60227, Offer 26293 Hydraulic Horizontal – Two-Column Miter Bandsaw Machine Technical data: - Automatic operation for the cutting process, hydraulic lifting and lowering of the saw frame - Manual miter adjustment to the left and right with clamping - Saw band dimensions 4400 x 34 x 1.1 mm - Cutting speed, continuously adjustable 15 - 150 m/min - Cutting pressure regulation, continuously adjustable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range: - at 90°: round 335 mm Ledezz Rblepfx Ahajah - at 90°: square/rectangular 500 x 335 mm - at 45°: round 330 mm - at 45°: square 320 x 335 mm - at 30°: square 170 x 335 mm - Miter adjustment with digital angle display - Outfeed roller conveyor with dimension stop 6000 mm - Infeed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 1500 x H 1850 x D 2100 mm - Weight approx. 1500 kg