Used Split Band Saw for sale (8,659)

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Lrjdpfxoyh Hc Rj Agpsp

Condition: good (used), Year of construction: 2002, machine/vehicle number: 122668, functionality: fully functional, cutting height (max.): 460 mm, cutting width (max.): 600 mm, saw band length: 7,470 mm, saw band width: 54 mm, section length (max.): 760 mm, section length (min.): 8 mm, TECHNICAL DETAILS Saw Blade Dimensions: 7,470 x 54 x 1.3 mm Cutting speed: infinitely variable (approx. 1:7) Working Area Material diameter - round material: max. Ø 460 mm Material dimensions - square material (w x h): max. 600 x 460 mm Cut-off length - single stroke: min. 8 mm, max. 760 mm Cut-off length - multiple strokes: min. 8 mm, max. 9,999.9 mm Minimum part length in automatic mode: 90 mm Working Height Working height: 720 mm MACHINE DETAILS Dimensions & Weight Dimensions (L/W/H): 2,320 x 3,660 x 2,570 mm Width with chip conveyor (option): 4,650 mm Weight: approx. 6,000 kg Electrical Data Main motor: 7.5 or 9.2 kW Hydraulic motor: 2.2 kW Saw drive motor: 0.18 kW Lrodpfx Aozmdrnogpsp Coolant pump: 0.19 kW Chip conveyor (option): 0.18 kW Roller conveyor drive (option): 0.8 kW NC positioning drives (option): 0.37 kW

Condition: good (used), Year of construction: 2006, cutting diameter 335 mm capacity 90 degrees: flat 500 x 335 mm saw band length 4400 x 34 x 1.1 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1800 kg range L-W-H 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only Lrjdpfx Ajzn Ahqsgpjp - Automatic material feed - Continuously variable lowering speed 0â??300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â??150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâ??s manual

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm Lrjdpfsxcp Sfsx Agpjp table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Lodpjzpb Eqsfx Agperp

Condition: used, Year of construction: 2003, total height: 2,440 mm, total length: 1,900 mm, total width: 1,250 mm, Colour: Blue Weight: 1.500 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AZ11151 - Saw direction: vertical - Main motor power [kW]: 15.0 - Wheel diameter [mm]: 915 - Max. cutting to feed roller opening [mm]: 230 - Max. cutting width to column [mm]: 300 - Max. cutting height [mm]: 320 - Table width [mm]: 1250 - Table length [mm]: 740 - Max. band saw width [mm]: 100 - Min. band saw length [mm]: 5385 - Max. band saw length [mm]: 5485 - Min. band saw thickness [mm]: 0.8 - Max. band saw thickness [mm]: 1 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 150 - Options: Tiltable fence - Voltage [V]: 400 - Transport dimensions: 1900mm x 1250mm x 2440mm (l x w x h) - Transport weight [kg]: 1500kg Ljdezmxvnopfx Agporp - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, Equipment: CE marking, WELL-MAINTAINED BAND SAW FROM A HOBBY WOODWORKING SHOP, MACHINE BARELY USED Cutting width up to 465 mm (without parallel fence) Cutting width up to 390 mm (with parallel fence) Rubber-coated wheels (low noise) Measuring scale on the fence with magnifying glass Aluminum fence with quick-release mechanism Drive motor 2.1 kW (S6 operation), 1.5 kW (S1 operation) 2 band speeds (380 / 820 m/min) Cutting height adjustment via handwheel Saw band width from 6 - 25 mm possible Table can be tilted 0 - 56 degrees Saw band length 3,454 mm Lrodpfxsznliqe Agpjp 2 dust extraction ports, diameter 100 mm each Weight approx. 170 kg

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Ljdpfx Aoznh Nmsgpsrp Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Lrsdpfx Agowxmhlopop Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: like new (used), - machine in stock - after a technical review - very good condition - ideal for the production of chairs   TECHNICAL PARAMETERS: - 7.5 kW main engine - two dugouts - pneumatic derrick control - pneumatic digging - wheel diameter 850 mm - 40 mm tape width - maximum length of the element 1300 mm - maximum width of the element 800 mm - maximum height 120 mm - two pneumatic side clamps - two pneumatic working distances - continuous feed regulation - hydraulic feed - 1.85 kW pump motor - receiving conveyor 180 mm x 2000 mm - 0.25 kW belt conveyor - central lubrication   Lodpfx Agjd Dc E Ajperp Machine dimensions: - length 400 cm - 230 cm wide - height 250 cm - weight ~ 2000 kg

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 880 mm, control type: manual, actuation type: electric, total height: 2,700 mm, total length: 1,800 mm, total width: 1,250 mm, overall weight: 720 kg, table height: 980 mm, Equipment: CE marking, motor brake, – Made in Italy – Year of manufacture: 2019 TECHNICAL SPECIFICATIONS: – Wheel diameter: 900 mm – Max cutting height: 540 mm – Max cutting width: 880 mm – Table height from the floor: 980 mm – Table dimensions: 1170 x 800 mm – Max/min blade length: 6300 / 6100 mm – Max blade width: 50 x 0.8 mm – Motor power: 11 kW – Feed motor power: 0.37 kW – Feed with pneumatic clamping – 10 feed speed settings: 1 - 25 m/min Lredpfxszim Nno Agpsp – Roller guide for the feed – Table adjustable for angle: 0° - 20° – Outlet: 2 x Ø 120 mm – Machine dimensions (L / W / H): 1800 x 1250 x 2700 mm – Weight: ~720 kg

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, Equipment: CE marking, – DTR technical documentation in Polish TECHNICAL PARAMETERS: – flywheel diameter: 815 mm Lrodpeyuf Tqjfx Agpop – max. cutting height: 500 mm – max. cutting width: 800 mm – table dimensions: 1030 x 600 mm – table tilt: 0° – 20° – blade dimensions: 5643 x 38 x 0.65 mm – blade speed: 20 m/s – motor power S1: 4.5 kW – large tilting cast iron table – high-quality steel construction – precise bandsaw guidance system above and below the table – rubber-coated wheels for extended bandsaw blade life – overall dimensions (L/W/H): 122 / 77 / 254 cm – weight (net/gross): 680 / 770 kg

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm Lredpfx Asy El U Degpep – Weight: ~300 kg

Condition: used, Used ERHARD+SPIESS vertical band saw model HK 3C with combined filing device. Throat: 300mm with Ideal band welding device. Lrodswkuytspfx Agpjp Saw blade/band length approx. 2,800mm, width 3-10mm Throughput 200mm Cutting speed 9-800m/min, adjustable in steps Drive 1,400 / 2,800 rpm Table angle adjustment: right/left 15° each, forward/backward 10° each Filing machine stroke approx. 0-120mm, workpiece thickness max. 80mm, strokes/minute 75-300 Including 5 file holders with 5 different file shapes Delivery time: from stock. The machine can be inspected by appointment in 713334 Waiblingen Beinstein.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 400 mm, Offer for automatic bandsaw SBA 361: P-CNC-FORTE-SBA361 Dear Ladies and Gentlemen, We are pleased to be able to offer you our high-quality FORTE SBA 361 automatic band saw from 2002. The machine is in used condition. Technical data - Maximum workpiece diameter: 400mm - Feed roller conveyor - Automatic with bar feed - Lrodpfx Agst I Emvjpop Space requirement approx. (height/length/width): 270 cm / 500 cm / 300 cm Price net 26.000 € VHB

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Lrjdpfx Asxztfasgpop Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Ledpfx Aozlqvqsgpjrp Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: ready for operation (used), Vertical bandsaw Hahn + Kolb with Ideal bandsaw blade welding machine and filing machine Lodpfjry U Nhex Agperp

Condition: used, Year of construction: 2004, cutting diameter 320 mm cutting width 320 x 320 mm saw band length 5.090x34x1,1 mm cutting speed 20 - 110 m/min feed length 750 einfach mm min. dia. 10,0 mm min. cut-off length 6,0 mm Lredpfxjzluk Se Agpsp total power requirement 7,0 kW weight of the machine ca. 2.200 kg

Condition: used, Year of construction: 1989, functionality: fully functional, Kasto HBA 360 AU bandsaw incl. roller conveyor Cutting range: 360 mm Saw blade dimensions: 5334 x 32 mm Lrjdpsyxxfijfx Agpsp Length: 2310 mm Width: 2600 mm Height: 1700 mm Weight: 2600 kg We are available for further questions.

Condition: used, Year of construction: 2008, functionality: fully functional, MEP Shark 282 NC evo band saw machine. This robust saw is ideal for precise cuts in various materials. Lredpfx Agezmikvopep MEP Shark 282 NC evo Manufacturer: Mep Type: Shark 282 NC evo Year of manufacture: 2008 Condition: used Further information available upon request.

Condition: used, Automatic Horizontal Bandsaw Ledpfx Aoydv Rrjgperp Year: 2011 Serial Number: 11042134 Model: LX – 460AE Blade Size: 4770MM x 41 MM x 1.3MM Hydraulic Cutting Capacity: 460MM x 430MM

Condition: used, Model: USF-8 SPEZ Serial No: 37531 Lredpfx Agjydv R Espsp Capacities: Throat Depth: 810mm Height Under Blade Guide: 550mm Table: 1480 x 1220mm Table Traverse: 1000mm Feeds: Variable Speeds Variable: 12 – 3000 Rpm Blade Size: 6550 x 38mm Complete With: Operators Consul Laser Alignment Coolant Hydraulic Blade Tensioning Approximate Dimensions: 2400 x 2400 x 3750mm Approximate Weight: 1500kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kasto KASTOwin pro AC 5.6 fully automatic band saw for metals (2017) Manufacturer: Kasto Ledpfxszl Tfho Agperp Type: KASTOwin pro AC 5.6 Year of manufacture: 2017 Condition: used, operational Operating hours: see photos. Scope of delivery: - Documentation

Condition: good (used), Alber sharpening machine for band saw blades Blade width 50 - 206mm Ljdeglui Aopfx Agporp Tooth pitch 20 - 50mm