Used Bake Ausdrehen Device for sale (11,920)

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm Ijdpexvp S Ejfx Ab Tohw -Weight: 1.4 kg

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: Ihedpfxewx Aadj Ab Tew - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 45,000 kg, empty load weight: 3,800 kg, total length: 8,000 mm, construction width: 2,500 mm, Special equipment Iedpfxoyn St Do Ab Tjhw Condition: Ready for use and fully operational Technical condition: Very good Multi-purpose spreader for reachstacker with 27 lifting eyes and 2 support stands

Condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press Ihodpfx Absd Tg Dcs Tow -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces -Inner width: 1075 mm -Interior height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Year of construction: 2003, condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -Manufacturer: WIMO Lifting Technology -Turning device: simultaneous turning of several stacks of circuit boards, or rotation of workpieces -Loading: loading and unloading from the front with a forklift -Maximum internal width: 4000 x 1700 mm Iedpfx Asyt Ncmjb Tjhw -Maximum internal height: 580 mm -Minimum internal height: 250 mm -Load capacity: 6000 kg -Transport dimensions: 5960/2400/H2435 mm -Weight: 9000 kg

Condition: excellent (used), Edge trimming machine Iodpswiwnqjfx Ab Tshw Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: not inspected (used), functionality: unexamined, overall weight: 15 kg, total length: 400 mm, total width: 250 mm, total height: 230 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 04.05.26 and 07.05.26. Ihsdpfoyr I Tnjx Ab Tow MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 250 x 230 mm Weight: 15 kg External reference: 56

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 07-02275, total width: 420 mm, total length: 450 mm, total height: 950 mm, input voltage: 230 V, overall weight: 70 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Tool holder: SK 40 MACHINE DETAILS Operating voltage: 230 V Frequency: 50/60 Hz Ihedpfx Abeyr E Ate Tjw Connected load: 50 W Dimensions & Weight Dimensions (L x W x H): 450 x 420 x 950 mm Machine weight: 70 kg External reference: Lot 1

Year of construction: 2018, condition: good (used), Herding MULTICOATER MCI 55/1 dosing unit Manufacturer: Herding GmbH Filtertechnik Model: MULTICOATER MCI 55/1 Year of manufacture: 2018 Type: Dosing unit for filter coating Ihedpsyrnd Tjfx Ab Tjw Supply voltage: 24 DC V Weight: 70 kg Weight: 130 kg Machine ID: 28696 Machine ID: 28697 CE marking: available Quantity: 2

Condition: excellent (used), Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servo motor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device unused -Type: Eldro Ed 80/6 Ihjdjv Hxw Aepfx Ab Tew -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Number: 4x lifting drive available -Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/piece

Condition: good (used), Year of construction: 2015, Brand: Piovan Type: Dryer HR2000651 Model: HRM200 Serial No.: 08 020 044/07 0135 Dry Air Quantity: 200 m³/h Hopper capacity: 3 × 300 dm³ Connected load max: 38 kW Year of manufacture: 2015 Isdjyux U Ujpfx Ab Tohw and Model: PTUSET Year of manufacture: 2017 Connected load max: 9.0 kW

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 200 mm, Kuris KV2002 UVV Straight Knife Cutting Machine for Textile Manual Cutting Manufacturer: KURIS - KRAUSS & REICHERT Condition: Used, very good, all wear parts replaced with new ones! We are an authorized KURIS service partner and specialist dealer. The electric straight knife cutting machine, KURIS KV-2002 model, offered here is in excellent technical condition and fully operational. A comprehensive inspection has been carried out by our specialist workshop. This machine is already equipped with UVV safety protection. The UVV protection meets the latest safety regulations required in Germany. All necessary wear and spare parts have been freshly replaced. The manual cutting machine can be inspected and tested on site. Cutting height: approx. 200 mm Weight: approx. 15 kg Ijdpfx Aeyvgghjb Tjhw Current new price: EUR 6,687.99 (gross) Connection: 400V 50Hz CEE-16A Power: 790W Shipping within Germany possible – PICKUP PREFERRED! Packaging and freight costs are borne by the buyer. These costs will be clarified on request/purchase according to current rates. NOTE on warranty/liability: This item comes from a business liquidation. Items confirmed as coming from a business closure can be inspected and, within the scope of possibilities, tested for functionality on site. The following applies: purchased as seen/inspected – under exclusion of any warranty or guarantee claims. The buyer accepts these terms with purchase. COMMERCIAL SALE: You will receive a proper invoice with VAT shown upon purchase. Subject to errors and prior sale.

Condition: excellent (used), Reversing clamp Ihedoin Ef Ropfx Ab Tew Manufacturer: Rückle Type: PKTW 2 Dimension: 5 x 1 x 1,5 meter Forkardt power chuck type FNC 315-65 Bore 65 mm Outer diameter 315 mm Further: Profile rail guide RUE 45 4 centering and clamping units Integrated chip guide

Condition: new, New Electric Belt Hoist SWF - PFAFF Silberblau Type ATHLO belt - BH203L3E Textile belt hoist, crane hoist with trolley Serial No.: 3540053G01007 Year of manufacture: 2003 (new - unused) Lifting capacity: 1,600 kg Iedpsypw Hrefx Ab Tohw Hook path: 6 meters Main hoisting speed: 6.5 m/min Creeping hoist speed: 1.0 m/min Trolley travel speed: 10 / 2.5 m/min Distance from undercarriage wheel to load hook: approx. 450 mm Pendant control cable length: approx. 6 meters 3 load strands = 1,600 kg Main hoist motor power: 1.9 kW Creep hoist motor power: 0.3 kW Trolley motor power at 10 m/min: 0.25 kW Trolley motor power at 2.5 m/min: 0.06 kW Power connection: 400 Volt, 50 Hz - Emergency stop - Very quiet, low-maintenance, and safe operation - Trolley for I-beams, with 2 travel speeds - Suitable for I-beams with approx. 100 to 200 mm width - TELEMECANIQUE position limit switch type XCR Space required L x W x H: 1100 x 700 x 600 mm Weight: 140 kg As-new condition – unused from stock

Condition: used, Year of construction: 2001, liter capacity . l feed pressure . bar Ijdpfx Ajyuy Tlob Tjhw coolant capacity . l

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Iedpfjxn Ax Ajx Ab Tehw

Condition: good (used), Year of construction: 2018, Internal item no.: 25119 Mobile Surface Roughness Tester Mahr Marsurf PS10 Year of manufacture: 2018 Ihedpfxjyqzwks Ab Tow The measuring device is fully functional and can be inspected under power by appointment in a heated storage area of over 500 m².

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Ihjdpfxoxzuxnj Ab Tow Motor output 5,5 kW Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Condition: new, Year of construction: 2022, Suction nozzle diameter: 180mm Nominal volume flow: 4200 m³/h Scavenging bag volume: 2 x 175 l Filter cleaning: manual Motor power: 3.8 kW / 400V Machine height: 1700 x 600 x 2400 mm (L x W x H) Ihsdpfxsd Txblo Ab Tsw Weight: 69 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 0.1426 m³ Filter cleaning: manual Motor power: 1.1 kW Isdpfx Abswhuufo Tjhw Machine height: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, overall weight: 100 kg, total length: 700 mm, total width: 450 mm, total height: 1,350 mm, machine/vehicle number: 101, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operating pressure: 6 to 7 bar Ihjdpfsyn Eprox Ab Tjw MACHINE DETAILS Serial number: 101 Length: 700 mm Width: 450 mm Height: 1,350 mm Weight: 100 kg EQUIPMENT Base frame

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 105, total height: 1,200 mm, total length: 900 mm, total width: 400 mm, overall weight: 70 kg, No reserve price – guaranteed sale to the highest bidder! Ihjdjyn Epfepfx Ab Tew Submitting a bid requires timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Pressure: 6/7 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 400 x 1,200 mm Weight: 70 kg EQUIPMENT Base frame External reference: Groven – Lot 15

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 08649020, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Ihsdpfjyn Eb Usx Ab Tsw Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 100 mm Weight: 10 kg External reference: Lot 18 / L.Schaible

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 0500230, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Tank diameter: 540 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Ihodpfxeyn Aabe Ab Tjw Connection: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Weight: 200 kg External reference: Pieper - Lot 86

Year of construction: 2012, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 3820120600272, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates collection on time either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Tank diameter: 540 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 5.6 A Connected load: 2.2 kW Dimensions & Weight Iodpfoynz T Hjx Ab Tshw Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Weight: 200 kg External reference: Pieper - Lot 87