Used Cl500 Q for sale (1,870)

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. Cedpfxjhnc E As Afnspu The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 2,185 mm, total width: 670 mm, total height: 2,150 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. Cpedpfx Ajx U D Dpofnju The F200 XL is a 3-station machine and comes standard with the brush height tracking system designed by Q-Fin. In combination with the simple button system, this ensures that setting up and working with the F200 is self-explanatory, resulting in the most user-friendly machine available on the market. The machine is equipped as standard with continuously adjustable speed on the conveyor and on the brush(es) and/or grinding head(s), making all possible operations and results achievable. You determine the desired finish yourself. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g. stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the transport table, enabling even smaller workpieces (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is not without reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: used, Year of construction: 2023, functionality: fully functional, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine has been used for several years. It has been checked, tested and is working 100% properly. The F200 XL is a 3-station machine suitable for deburring, grinding and/or rounding small sheet metal parts. This deburring machine has a grinding unit as its first processing station, followed by two cup brushes. The grinding belt removes burrs or gives the product a nice line finish. The brushes ensure the desired rounding of the product and give the surface an even finish. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g. stainless steel and aluminium) or a Cpodpfx Afox U Dx Hjnou magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the transport table, allowing even smaller workpieces (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is with good reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. F800 – All-round finishing machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future! Cpjdox Uz Ilspfx Afnju

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 1,795 mm, total width: 2,210 mm, total height: 1,085 mm, overall weight: 1,400 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has been in use for several years. It has been checked, tested and is working 100% properly. Removing slag is a labour-intensive task that often still involves the use of a hammer and chisel. Alternatively, an electrically powered hand-held machine can be used for this purpose. Due to the heavy load during operation, both for the operator and the hand-held machine, these hand-held machines need to be replaced regularly. This results in high costs, additional waste and possible health problems for the operator. Manual slag removal is time-consuming and stressful for both the operator and the machines, leading to high costs and wear and tear. The DS600 and DS1200, specially developed by Q-Fin, automatically remove slag after plasma or oxy-fuel cutting. These machines can be easily integrated into any production line, removing slag before the product reaches the deburring machine for edge rounding. The removed residue is collected in a container and can be disposed of as scrap. By performing slag removal separately, contamination in the deburring machine is prevented. Cpedpox Ux Rwofx Afnsu Both models are ergonomically designed with touchscreen controls for ease of use. The slag is effectively removed by two counter-rotating slag removal rollers, which strike the product twice per revolution. The result is a flat product that is ready for further finishing.

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. Cjdsx Hqlwepfx Afnepu 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. - Mobile and compact setup Cpodpoixz Hdjfx Afnsu - Standard with vacuum system 2.2 kW - Optional with 2 or 4 electromagnets - Equipped with 2 grinding heads - Bracket with double hand control (CE marking) - Workpiece width: max. 780 mm / length unlimited - Power consumption of machine: 400 V, 50 Hz, 10 A, 6 kW - Dimensions: 1435 x 1100 x 1510 mm (L x W x H)

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm Cpjdpfx Ast Dpxbefnsu with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Brush motor speed 150 - 1500 r.p.m. Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Year of construction: 2023, condition: new, A hand-operated budget table grinding machine for the deburring, grinding and edge rounding of sheet metal parts. The ProGrinder is a manually operated deburring machine which is suitable for finishing sheet metal parts. With the ProGrinder you can deburr semi-automatically for an attractive price. With this machine, Q-Fin gives you the possibility to achieve high-quality edge rounding with little effort, simply remove burrs and even polish the surface to a high-gloss finish. Optionally, you can also mount an orbital head on the ProGrinder so you can apply a nondirectional finish to the product. New machine from 2023, can be delivered from stock. Ask us about the attractive price. Machine comes with 1 year warranty (excluding wear parts). Machine is located in Bergeijk, NL. Cpedelbmm Espfx Afnju Machine Power Supply: 230 V |50 Hz | 4 A | 1kW Maximum workpiece height: 120 mm Maximum workpiece width: 780 mm / Lengte onbeperkt Dimensions (LxWxH): 1435 x 1100 x 1510 mm

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. Cpedpfsl Dw D Eox Afnsu At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: new, Year of construction: 2020, conveyor belt width: 900 mm, conveyor belt speed: 167 mm/s, total width: 10,000 mm, total height: 3,000 mm, Equipment: emergency stop, 1 pc. lift conveyer driven 3000x1000 mm. 1 pc. lift conveyer driven 1300x1000 mm. Cpedpfxjtltklj Afnsu 1 pc. conveyer not driven 3000 x1000 mm. 1 pc. conveyer not driven 4500x1000 mm. 1 pc. Pallet magazine for EUR pallets 1500x900 mm.

Condition: used, Leybold A700 Q deposition system (ebeam) Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Csdjuhcnijpfx Afnspu Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 37.500,-

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. Cpedoxyafkepfx Afneu ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: used, machine/vehicle number: 006467, Max. panel width: 1200 mm Max. panel length: 2500 mm Csdpfxoyhbk Ee Afnepu 90 degree transfer system: yes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, Equipment: chip conveyor, rotational speed infinitely variable, Year 2011 Axis travels 1300x600x600 mm Machine weight 8,000 kg Box ways Spindle ISO 40 (DIN 69871) 12,000 rpm Spindle line chiller High-pressure internal spindle coolant BLUM laser tool probe 24-position random tool changer Csdpoxql Ncsfx Afnopu Auger chip conveyor CNC HEIDENHAIN 530 Remote electronic handwheel

Condition: used, machine/vehicle number: 16807, Year of construction: 2017, operating hours: 6,899 h, load capacity: 2,500 kg, lifting height: 6,200 mm, free lift: 1,850 mm, load center: 600 mm, construction height: 2,700 mm, fork length: 1,150 mm, front tire size: , rear tire size: , overall weight: 4,203 kg, enginetype: Electric, manufacturer: Jungheinrich Codpfx Afoyg S T Uenepu

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Cpodot Hg Huepfx Afnju Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: used, Year of construction: 2007, 2007 | Holland-Lift Q 135 El 24 (15m) | Used Scissor Lift 📍Location: Estonia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 26 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The hourmeter is broken, and the protection plate near the drive motor is bent. The drive motor is in good condition, and all operations work, except the lifting leveling sensor, which occasionally malfunctions. The customer defrosted the remote and charged the batteries before the inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38110 Equippo" is commonly used when looking up more details online. Codpfxoyailbs Afnepu 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 800 mm, spindle diameter: 150 mm, table load: 25,000 kg, table length: 2,000 mm, table width: 2,500 mm, The machine is in good technical condition, connected to power and can be tested. CNC control system Siemens Sinumerik 840D. Tool magazine for 80 tools, HUI 50 angular head, rotary table S 25 measuring 2000 x 2500 mm, travel 1800 mm, clamping plates 4xUD 3220x2195 mm. Cpjdpfxoyg Dfco Afnou

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Cpsdpfex R A E Rox Afnsu Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12048

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Cpsdpfsx R A E Dex Afnsu Second identical unit available: Reference osertech # 12049  

Condition: used, Year of construction: 2006, operating hours: 2,706 h, Type of fuel: Electric Empty weight: 3.010 kg Dimensions (LxBxH): 195 x 115 x 215 cm Lifting capacity: 1.500 kg Lift height: 336 cm Clearance lift height: 150 cm Fork dimensions: 1.150 x 700 mm Cedpfx Afjwfpr Tjnjpu - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 720803 - Operating hours: 2706 - Lifting capacity: 1500kg - Lifting height: 3360mm - Overhead clearance: 2150mm - Free lift: 1500mm - Fork length: 1150mm - Maximum fork width: 700mm - Minimum fork width: 0mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Non-marking tires, Free-lift, Work lights - Mast: Duplex - Inspection valid until: 10.2025 - Drive: Electric - Brand/Type: Hawker - Battery year of construction: 2006 - Capacity: 460Ah - Battery voltage: 48V - Transport dimensions: 1950mm x 1150mm x 2150mm (l x w x h) - Transport weight [kg]: 3010kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q -Type: TQD 3110 D Codpfx Afeudqbijnepu -Measuring range: 0 to 399 °C -Dimensions box: 220/130/H135 mm -Weight: 0.8 kg

Condition: good (used), Year of construction: 1997, Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Alfa Laval, air-operated double diaphragm pump -Type: DL25-AA-EET-Q -Flow rate: l/min -Discharge pressure: bar -Total dimensions: 240/230/H300 mm Cpodpfxsvay Uij Afneu -Weight: 8.7 kg

Condition: good (used), Electric motor, three-phase motor -Manufacturer: Dietz, electric motor type FDR 80C/ 2 Q -Power: 1.5kw -Speed: 2850 rpm -Shaft: Ø 19 x 35 mm -Construction: B14 -Protection class: IP 54 -Number: 3x motors available Cpsdsm Rk Tlspfx Afnsu -Price per piece -Dimensions: 275/210/H160 mm -Weight: 13.2 kg/pc.