Used Cl500 Q for sale (242)

Condition: good (used), Year of construction: 2009, 520 S 1600 - 290/290 Complete thermoplastic cylinder, 35 mm, highly wear-resistant Complete thermoplastic cylinder, 35 mm, highly wear-resistant, for 2nd injection unit Drive unit with 30 kW motor and 65 l/min pump delivery rate Accumulator module with 64 l storage capacity (max. 230 bar) Selogica direct control system Technology level: accumulator drive Multi-component processing 2nd injection unit 290 vertical Open nozzle 25 mm Open nozzle 35 mm Itedpfsxl Ty Eex Agzer Open nozzle 35 mm for 2nd injection unit Submerged nozzle tip for open nozzle Electrical and hydraulic actuation of NVD in mold for 1st injection unit Electrical and hydraulic actuation of NVD in mold for 2nd injection unit Heating band for open nozzle Heating band for open nozzle for 2nd injection unit Heating/cooling jacket for open nozzle Variable clamping plate set, Ø 125 mm Minimum installation height expanded to 450 mm Blow-out unit 1 with pressure reducer Selection unit incl. connection Ejector pressure P/Q controlled (prerequisite: T2) Core pull 1, parallel movement P/Q controlled, programmable Core pull 2, parallel movement P/Q controlled, programmable Electric core pull control 1 (prerequisite: VE 436/00) Top guard open, increased to safety dimension Start-up inspection hydraulic accumulator Continuous oil cooling and filtration Increased cooling capacity Parting plane device on short supports for 2nd injection unit Nozzle contact force controlled, programmable for 1st injection unit Nozzle contact force controlled, programmable for 2nd injection unit Conveyor belt connection electric via socket combination Emergency stop interface 1 to 24-pole interface, 2-channel Emergency stop interface 2 to 24-pole interface, 2-channel Temperature release up to 450°C and reinforced cylinder heating Basic equipment for control of electric axes Host computer interface ARBURG 8 programmable digital inputs/outputs on terminal strip Interface for mold temperature control unit 20 mA Connection cable for REGLOPLAS temperature control unit Serial USB printer interface External PC keyboard with USB interface Additional floppy disk drive via USB interface CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Holder for PC keyboard with USB connection Injection with mold closed ("flying injection") 3 measurement circuits for mold temperature 15 electric heating control circuits for mold heating Device interface Start-up parameters Post-pressure switching channel 3 on fixed mold plate Interface for colouring unit LSR unit interface via 6-pin Harting connector Interface for colouring unit for 2nd injection unit Interface for vacuum control Vacuum control with vent function Vacuum monitoring via analog signal Vacuum unit 40 m³/h Kit for connecting mold to vacuum valve Interface for flow monitoring for cold runner system Energy monitoring and power consumption display 2 cooling water circuits laid to fixed mold plate 2 cooling water circuits laid to moving mold plate 4 manual cooling circuits Basic equipment for 2nd cooling water distributor (manual) 7 manual cooling circuits for 2nd water distributor Machine-related cooling circuits controlled Equipment package: advanced monitoring Equipment package: advanced movements Equipment package: production control Equipment package: optimization / operator aids Equipment package: quality assurance Equipment package: documentation aXw Control ScrewPilot for 1st injection unit aXw Control ScrewPilot for 2nd injection u

Condition: used, Year of construction: 1998, grinding length 800 mm grinding width 500 mm workpiece height 425 mm total power requirement 15 kW weight of the machine ca. 4,5 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : GEIBEL & HOTZ CNC Cycle Controlled Precision Surface Grinding Machine model FS 850 GT SL year 1998 Serial no 1012580698 _____ Grinding length max. (table movement 900 mm) 800 mm Grinding width max. (cross movement 500 mm) 500 mm Mounting height under new grinding wheel 425 mm size of magnetic plate 800 x 500 mm Max. table load 1.100 kg Table speed 2 – 28 m/min Cross feed intermittend 3 – 60 mm/stroke Cross-/Vertical quick feed 4.000 mm/min Grinding wheel measurements 400 x 100 x 127 mm Grinding spindle-drive approx. 9 kW Total electrical load approx. 22 kW - 400 V - 50 Hz Weight approx. 4.500 kg Accessories / Special Features: • Dialog-guided GEIBEL & HOTZ automatic CNC cycle control model SL for 3 axes. Graphically supported data input in absolute dimensions or via teach-in procedures for preprogrammed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and easy monitoring axis movements and work progress. • Electronic handwheel for 3 axes X, Y, and Z, feed rate switchable from 0.01 / 0.1 / 1 mm/rev. • table movement is effected by a rolling ring thread drive (GT), which allows both very high and very low table speeds with constant torque and very high efficiency. • cross and vertical movements are effected by a ball screw drive with incremental glass scale. • Single-point diamond dresser mounted on the table for aut. dressing cycle and aut. compensation • MPM automatic grinding wheel balancing device. Iedpfst Hxamex Agzetr • Mounted electromagnet plate 800 x 500 mm with adjustable holding force • Wet grinding facility with universal fleece belt filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors • sep. switch cabinet, sep. mobile control panel, various accessories, manuals , etc. Condition : very good, with the wide grinding wheel for large surface grinding ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We do always have a large selection of Grinding machines in stock – please let us know your requirements !

Condition: used, Used Line for Oil Production ALFALAVAL up to 1500 kg/h The continuous cycle olive mill operates as a complete system, producing oil with a capacity of up to 1500 kg/h. Moreover, each component features high-quality materials, primarily stainless steel, ensuring durability and compliance with hygiene regulations. Itedpfx Aevgu U Degzer Loading and Washing System To begin with, the bin tipper feeds olives onto a conveyor belt, maintaining a continuous and consistent flow toward the washing phase. Subsequently, the washer with leaf remover separates leaves and impurities effectively. In addition, the stainless steel Alfa Laval washer with an integrated cyclone cleans the olives thoroughly. Meanwhile, a hopper and screw feeder deliver the olives to the crusher, preserving their quality through stainless steel construction. Crushing and Paste Transfer After washing, the stainless steel hammer crusher Rapanelli, mounted on a steel frame, crushes olives uniformly at a capacity of 25 q/h. Then, a pump transfers the paste to the malaxers, which play a crucial role in the process. Furthermore, six stainless steel tanks, each holding 600 liters, malax the paste. As a result, pneumatic valves control loading and unloading, while inspection windows provide a clear view of the process. Notably, anti-condensation doors, coded green for loading and red for unloading, enhance functionality. Decanter and Separation At this stage, the Alfa Laval decanter 716B-11G processes 12-15 q/h of paste. Consequently, the decanter separates oil and water into a stainless steel tank while a vibrating screen removes residues. Additionally, pumps handle the transfer of water and oil, and an 11-meter stainless steel screw conveyor moves the pomace through a hopper. Moreover, two Alfa Laval centrifugal separators (models 407-AGT and 507-AGT) refine the oil with high efficiency. Automation and Control On the automation side, the system relies on an electrical cabinet that automates and supervises operations. For this reason, a dedicated Touch Screen PC enables operators to monitor every phase of the process in real-time. Accordingly, this advanced control system minimizes manual intervention, ensuring precision and smooth operation. Operating Conditions The Used Line for Oil Production ALFALAVAL is running smoothly for the current campaign. Furthermore, its modular design and durable materials ensure longevity and simplify maintenance. Meanwhile, stainless steel piping preserves the oil’s organoleptic properties and prevents contamination. In conclusion, the Used Line for Oil Production ALFALAVAL up to 1500 kg/h provides an efficient and complete technical solution for producing high-quality oil.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0M001224, Le compresseur Frascold Q Series Q5-28.1E est une solution fiable et efficace pour diverses applications industrielles et commerciales. Conçu avec une ingénierie de précision, ce compresseur offre des performances et une durabilité exceptionnelles. Que vous en ayez besoin pour la réfrigération, la climatisation ou d'autres systèmes de refroidissement, le Q5-28.1E garantit des résultats constants. ➢Points forts du produit : Options de tension polyvalentes : Le Q5-28.1E est compatible avec différentes configurations de tension, notamment 220 v-240 v/380 v-420 v/3 phases/50 hz et 265 v-290 v/440 v-480 v/3 phases/60 hz. Cette flexibilité garantit une intégration parfaite dans votre installation existante. Construction robuste : avec un poids net de 79 kg, le Q5-28.1E est robuste et conçu pour résister aux environnements exigeants. La construction robuste garantit une longue durée de vie et un fonctionnement fiable. Dimensions compactes : Avec des dimensions de 449 mm (L) x 286 mm (l) x 328 mm (H), ce compresseur est peu encombrant. Il s'intègre dans les petits espaces sans compromettre les performances. Ijdpfx Agjr Id T Aezetr ➢Spécifications : Frascold Q Series Q5-28.1E compressor comes with: Voltage: 220v-240v/380v-420v/3ph/50hz - 265v-290v/440v-480v/3ph/60hz Net Weight: 79kg Dimensions: 449 (L) x 286 (W) x 328 (H) The Frascold Q Series Q5-28.1E compressor combines versatility, durability and a compact design, making it an excellent choice for your refrigeration system. Whether you're upgrading an existing system or starting a new project, this compressor delivers exceptional performance. Rely on Frascold's reputation for quality and reliability.

Year of construction: 1989, condition: excellent (used), Type: EDU / 80 DR EK ICH FQW / FQS Q ApW/Q ApSS Iedpfsh Ar Tyjx Agzstr Number: 1824/1989 Admission: SK 50 Stop surface W x H: 480 x 460 mm Hole spacing W x H: 425 x 415 mm Gear wheel diameter inside / outside: 75 / 100 mm Speed range: 18 to 2,800 rpm Condition: very good Weight: 280 kg Dimensions: 560 x 410 x 1.000 mm

Condition: like new (used), 1 set of used, hardened, reversible hard top jaws Manufacturer: SMW-Autoblock Mounting on base jaws type: BERG, FORKARDT, KITAGAWA, RÖHM, SMW-Autoblock, SCHUNK Base jaw types: MFG- SFG- FGB Size: 400–500 Dimensions: Width: 45 mm Height: approx. 75 mm Length: 130 mm L-spacing: 60 mm F-slot: 18 mm Q-slot N: 30 mm Thread: M16 mm Application: wedge bar chucks, power chucks FORKARDT manual chuck F400 – F500 FORKARDT power chuck ø 500 mm KTNCV; SMW-KNCS; SCHUNK-THW500, Roto S, RÖHM-Duro, BERG-KHNC KITAGAWA-QJ21-QJ24 New price: >380.00€ Isdpfehlhbgox Agzotr

Condition: excellent (used), GRUNDFOS PUMP TP80-400/2 Item: D-5490-Grundfos pump USED WATER PUMP, GRUNDFOS Type TP80-400/2, 15,0 kW, Bar/C - 16/120 Q - 114,8 m3/h H - Max 34,7 m Itodpfsl I R T Nex Agzor O/m- 2940 Nice condition 3 pieces identical

Condition: as good as new (ex-display), Year of construction: 2020, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Itedpfjg Iihwox Agzsr Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: new, Year of construction: 2022, Bavelloni VDM1636 series vertical milling and drilling machine. + additional options : - pre-setting of drill bits , whetting , - Barcode reader , - additional Camnay office software. VDM 1636 CN is an NC vertical milling and drilling machine designed to automatically perform complex drilling and milling cycles. Equipped with one double drilling head (1 + 1 opposite spindles), each equipped with a rotary storage tool (8 positions each). The machine, characterized by great ease of operation, has been designed in accordance with the most advanced technical solutions to ensure extremely high accuracy in work. The dual rotary tool storage with 8 positions allows drilling, countersinking and milling at a single workstation. Easy to use, fast and precise in execution thanks to the technological solutions used: 5.5 kW spindles, spindle movements with ball guides, latest generation NC brushless motors with easy and intuitive software Possible work In one automatic cycle, the VDM 1636 CN can process the following operations: - Drilling - Countersinking - Milling - Cutting out Holes can be made at any point on the glass surface. The new control console used in the VDM1636 milling and drilling machine combines all the advantages of numerical control. This interface can work in a network with other machines . It can also be connected to the BAVELLONI network, so that the manufacturer's remote service is possible. The main features of this system are: Itjdpfxotui R Do Agzer - Programming while the program controls the movements of the machine, the operator can easily work on the computer. - Simple and direct graphical interface. - Data transfer via commercially available tools . VDM 1636 CN is equipped with one of the most advanced software systems (CAD / CAM) specifically designed for glass processing by numerically controlled machining centers is unique in performance, reliability and ease of use, thanks to the use of state-of-the-art technical solutions

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AA10003134, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,905 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 30 m/min, TECHNICAL DETAILS Working Area X-axis travel: 3,680 mm Y-axis travel: 1,905 mm Z-axis travel: 500 mm (with H50 suction cups) Traverse Speeds X-axis traverse speed: 25 m/min Y-axis traverse speed: 80 m/min Z-axis traverse speed: 30 m/min Milling Unit Number of axes: 5 interpolating axes Rotation direction: right/left Spindle Tool holder: HSK 63F Speed range: 600 – 24,000 rpm Power (S1/S6): 15/17 kW at 12,000 rpm Axis Movement C-axis rotation angle: 640° B-axis rotation angle: 270° MACHINE DETAILS Control: NC control Software: 3D CAD system Operation: eye-M operator console with integrated PC Electrical Data Rated voltage: 400 V Number of phases: 3~N Rated current: 84.0 A Frequency: 50 Hz Short-circuit withstand capacity: 10 kA Machine weight: 5,554 kg EQUIPMENT Itsdpfxjxcvllo Agzsr Pendulum operation Automatic axis lubrication Additional fixed control panel TECPAD remote control of machine functions 6 carrier rails Start L1825 Prisma Q working unit Air nozzle for tool Tool length measurement device Vise preparation for worktable with 6 carrier rails Front stop row H110 for worktable with 6 carrier rails First side stop row H110 for worktable with 6 carrier rails The machine will be dismantled for standard truck transport, no excess width required. The current disassembly status can be seen in the photos.

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: Iedpfx Aspm U U Nsgzotr * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: like new (used), functionality: fully functional, overall weight: 15 kg, total length: 150 mm, total width: 45 mm, chuck outer diameter: 500 mm, clamping range: 400 mm, jaw width: 45 mm, Warehouse clearance special price: 1 set of base jaws GBK500 with straight gearing for use with SCHUNK, SMW three-jaw chucks; ø500mm Manufacturer: SCHUNK Suitable for: three-jaw chuck or power chuck. Ijdpfxewuvb He Agzjtr ► SCHUNK SMW. ► Base and top jaws for chuck Ø 500 mm A = Length = 150 mm B = Width = 45 mm H = Height = 59 mm F = Slot = 18 mm Q = Transverse = 30 mm L = Bore spacing = 60 mm ♦ Weight approx. 15 kg ♦ Price applies to the complete set ♦ 3 base jaws ♦ Immediately available from stock.

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 555 mm -Piston diameter: 80 mm -Type: DNC-80-555-PPV-A Q R3 -Pressure: max. 10 bar -Dimensions: 770/93/93 mm -Weight: 8.4 kg Isdpfxjd I H S Ej Agzotr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 Itsdpfx Ajxczmzjgzor - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.

Condition: new, Year of construction: 2022, TWO-SIDED CUT BLADE MACHINE Itodpsnfu Ndsfx Agzer Productivity, accuracy and flexibility are the main features of the HE500 series: double edgers with cup wheels for grinding flat edges. Equipped with the latest technologies, they are high-class products that meet the needs of the most demanding customers; in addition, their integrated electrical box optimizes the footprint and improves ergonomics The HE500 models are equipped with the best technical solutions: high-performance spindles, movements with brushless motors, ball screws for fast and accurate movements, top-brand components for maximum reliability, 18.5-inch HD touchscreen control panel with keyboard, compact and user-friendly and intuitive graphics with icons and drawings. All necessary settings can be manual or automatic and managed by the control device.

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm Isdpeuxft Sjfx Agzotr 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Iodpfxsxc Ni Re Agzjtr

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: DN50 flanges 345mm between flanges Q = 35.1m3/h H = 33.9m n= 2920 /min Itodpfx Agstp A Shezor Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2018, 4 used route trolleys Manufactured by Still Type Liftrunner Year 2018 Serial numbers 550516 j 00013,00014,00015,00016 B Frame Load capacity 1 to Tractive force 2000 N Unladen weight 400 kg B-frame triple loadable 1000 x 600 mm 1.2.1 Load dimensions (length x width) mm 1210 x 810 1210 x 1010 / 1010 x 630 1.5 Load capacity 1 Q kg 1000 1 trolley: 1000 2 trolleys: 2 x 500 Itedpfx Agjuyi Agszsr Weight 2.1 Tare weight kg 408 Wheels/ Chassis 3.1 Polyurethane tires 3.2 Tire size mm ⌀ 200 3.5 Number of wheels 2 (center axle) 3.6 Track width b10 mm 810 Basic dimensions 4.2.1 Overall height lowered/raised h15 mm 313/353 4.4 Lift h3 mm 40 4.12 Coupling height lowered/lifted h5 mm 185/225 4.14 Drawbar length l0 mm 533 4.16 Cargo bed length/max. length of trolley 2 l3 mm 2030 4.18 Loading area width b9 mm 834 4.19 Overall length l1 mm 2859 4.21 Overall width b1 mm 1070 4.32 Ground clearance Center wheelbase lowered/raised m2 mm 0/40 4.35 Turning radius LTX 50/LTX 70 Wa mm 3350/3450 4.39 Length of frame opening (inside frame dimension) l9 mm 1994 4.40 Length of center plate l10 mm 350 4.41 Height drawbar lowered/raised h11 mm 170/210 Performance data 5.1 Max. Driving speed 3 km/h 15 Otherwise 8.5 Clutch articulated steering system Errors excepted

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 150950303003, pipe diameter (max.): 42 mm, tube wall thickness (max.): 2 mm, empty load weight: 2,700 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item by 31/10/2025! TECHNICAL DETAILS Working area: - Maximum tube diameter: 30 mm - Wall thickness: up to 2.5 mm MACHINE DETAILS Iedpfx Agexdbu Uszstr - Weight: 2,700 kg - Voltage: 380 V - Frequency: 50 Hz EQUIPMENT - Collet holder for accommodating collets up to 40 mm - Collet with extended opening for tube diameters up to 35 mm - Bend angle measuring and correction unit - Safety light barrier Note: The tools shown in the photos are included. Additional features can be found in the order confirmation (photos). According to the functions used, the machine is fully operational. The seller has not tested any unused functions (e.g., second tool level or Q-axis).

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, working width: 1,250 mm, operating speed: 10 mm/s, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 3,250 kg, total height: 2,510 mm, travel distance Y-axis: 590 mm, pressing force: 35 t, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, table width: 60 mm, working length: 1,250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Itodpfx Asv Eam Negzor Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Type: 130 MF Machine-No.: 20080229 YEAR OF MANUFACTURE: 2009 U1N: 400V / 50HZ U20: -9V level 1 S1: 58kVA Ijdpfx Ajvgdt Aegzotr I2p 6.46kA ED 100% S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Control cabinet: Machine no.: 20100079

Condition: defective spare-parts repository (used), functionality: limited functionality, Evex Global IIc. Scanning electron microscope with accessories, Compact SEM Model: CompactSEM Accessories: Calculator/PC Transformer with contactor and fuse for 230/120V AC Vacuum pump Digital Q-Dot power supply Digital Beam interface Digital ADC/MCA Note on the condition: Originally, the SEM had an EDX/EDS and EBSD (electron backscatter diffraction) sensor on board. Unfortunately, both are now defective. The SEM sensor is functional, but does not currently enable high-resolution images. Itodjuykamepfx Agzsr For this reason, the SEM is offered as a spare part donor.

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm max. module 6 min. module 1,5 Control SINUMERIK 840 C tooth width 5,5 mm spiral angle min. 0 / max. 60 ° max. number of teeth 120 min. number of teeth 5 ratio of transmission 1:10 min. ratio of transmission 1:1 work piece spindle speed max. 110 U/min blade head turning speeds 20 - 110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor Itodsvxwnwepfx Agzjr coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle speed (max.): 110 rpm, wheel diameter: 275 mm, TECHNICAL DETAILS Max. gear diameter: 275 mm Module range: min. 1.5 / max. 6 Tooth width: 5.5 mm Helix angle: min. 0° / max. 60° Number of teeth: min. 5 / max. 120 Gear ratio: min. 1:1 / max. 1:10 Drive & Control Control: SINUMERIK 840 C Max. workpiece spindle speed: 110 rpm Cutter head speeds: 20 - 110 rpm Total power requirement: 100 kW Iedpfx Aov Rc Srsgzstr Machine weight & dimensions Machine weight: approx. 16.7 t Space requirement: approx. 5,200 x 2,300 x 2,400 mm EQUIPMENT - Deburring device U-axis / Q-spindle - Chip conveyor - Coolant system - ELBARON electrostatic air cleaner - No tools or workpiece clamping devices