Id 5005 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Pressure total: 1.500 ton Bd28ob7uek Ram stroke: 800 mm Ram adjustment: 600 mm Shut height (stroke down, adjustment up): 1.270 mm Free frontal opening L-R: 5.060 mm Table surface area : 5.000 x 2.700 mm Ram surface area: 5.000 x 2.700 mm Number of strokes: 6 - 12 [...] Height over floor approx.: 9.860 mm Weight of machine approx.: 540 ton more
15
Capacity Driver 150 tons, Idler 150 tons = 300 tons total Work piece diameter Minimum 1000 mm - Maximum 8000 mm Gfwxed9 Tyre width 203 mm Input 400 / 3 /50 Fitted with Mechanical anti - creep facility Features Rotation speed 75 - 1500 mm per minute Length Driver 4200 mm Idler 4000 mm Width 1550 mm 1050 mm Height 1414 mm 1414 mm Nett weight approx. 17000kgs more
6

Bridge type Correa Bridge milling machine CORREA FP30/30 - 8900205FP30/30

Burgos, SpainSpain dealership location
6032 km
1996
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-426 Technical features Yrztfg Dimensions Table dimensions: 3000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1800 mm Distance between columns: 1680 mm Z axis traverse: 800 mm Milling head ... more
10
Used Dickte Int. Machine number: m2791 Manufacturer SAC Type RS/530 Hobelwidth 530 mm Hobel height 240 mm Knife count 4 Be0y9vhl0u Power 4 kW Speed knife wave 5,000 u/mine. Weight about 840 kg Built in 1980 Only 1 feed speed With electric table height adjustment Engine has been overhauled With adjustment theory and various knives Item location: 58730 Fröndenberg/Ruhr The machine can be visited under electricity and tried out. We would be happy to send you more phot... more
4

Bridge Crane - Single Beam ABUS ELK 5000 kg

Niederlangen, GermanyGermany dealership location
6338 km
2000
used
lifting capacity :5,0 t lift:6000 mm 2rhowu span width:25750 mm speed:10 / 40 m/min weight of the machine ca.:7,62 t total power requirement:8,2 kw more
3
Siemens 6SL3100-1BE21-3AA0 damping resistor for HFD line reactor, good condition, 100% needed, functional, included with com. photos Y2khj2 more
4
spindle diameter:160 mm x-travel:7000 mm y-travel:3500 mm z-travel:1000 mm w-axis:900 mm rotary table::2500 x 2000 mm table load:ca. 20 t table adjustment - longitudinal:1000 mm b-axis:360 ° spindle taper ISO:50 spindle turning speed - stepless:2 - 2000 U/min feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:z-16, x-y-w- 20 m/min total power requirement:125 kW weight of the machine ca.: t dimensions of the machine ca.:13,2 x 12,8 x üF 6,0 m Caetgfh2m new in 1993 retrofitted in 20... more
5
CASADEI SYNCRO 18-Automatic four-sided hoist 99qtjo0 The price-good four-sided cop for straightening and hobbling from bars to a maximum of 180 x 105 mm in one pass. The long material feed table allows the praezise guide of long and twisted work corners. The chip collection can be adjusted up to 10 mm. Suitable for profiling work up to 12 mm depth on the vertical spindles. Robust, massive and low-vibration machine design Praeziser and lightweight entry of the factory stucco through two-spe... more
1
Flatpile Feeder TREMAT Suction head 6 Pockets 2 Knife fold Be0yj7brel 1 Pocket after 1. Knife Perforating shaft Noise Hoods Digital Control Beltdelivery with Pressstation more


id 5005
daily

New machines via email!

Stay updated!
5

hydraulic Workshop Press HIDROLIKSAN HD 180 mot

Niederlangen, GermanyGermany dealership location
6338 km
2014
used
pressure:180 t stroke:400 mm table surface area:2100 x 690 mm Motor output:7,4 kW liter capacity:15 l/min dayligth:ca. 800 mm Dwhc93 distance between columns:1500 mm column travel -side:395 mm tank capacity:40 l weight of the machine ca.:1,6 t dimensions of the machine ca.:2,4 x 1,1 x 2,55 m more
3
Georgii Kobold KSV 12/30 E1-M3-K4/Z1/P2/G1 AC servo-controller MidiDrive, serial number according to the photo, used, properly completely overhauled and tested, 100% work, included with com. photos Fe3t20fj more
8
Used apparatus of part of Internal number: m2548 Manufacturer Zimmermann Type TZ and FZ Ma. Number 33 Built in 1986 Weight 350 kg Gvvofk With 3 - jaw Chuck Röhm 350 Item location: 58730 Fröndenberg/Ruhr The machine can be gladly visited and tried out. We will gladly send you more photos by E-Mail. A forklift/crane for loading is available. We reserve the right to a sale. There is the way learned to examine suburb for sale articles. Specific questions should be clarifi... more
3
Serial No. 709-0385 Capacity 1500 mm x 3.5 mm Control Elgo Z-57-E Oof0i380 Back gauge programmable Squaring arms 1 x 630 mm Input 415/3/50 5.5 kW Read-out to back gauge metric Actuated via wander type foot switch Length 6' 8" / 2.03m Width 5' 4" / 1.62m Height 3' 10" / 1.16m Nett weight actual. 1,340 Kgs / 1.32 Tons more
1
Manufacturer DOOSAN Model BM 2740 Year 2015 CNC HEIDENHAIN iTNC-530 Table Surface 4.000 x 2.500 mm. Longitudinal Traverse (X Axis) 4.000 mm Cross Traverse (Y Axis 2.700 mm Vertical Traverse (Z Axis) 800 mm Distance Between Columns 2.740 mm. Table to spindle nose 150-950 mm. Rapid Feed Axis (X, Y) 24 m/min Rapid Feed Z Axis 16 m/min Working Feeds 8.000 mm/min Spindle Speed 10.000 mm/min Taper BT-50 Spindle Power 25/30 Kw Tool Charger INCLUDED Clqvap7 ATC Positions 40 Max. tool ... more
5
Machine 1: 05-2003 Bdrb2bs90u Machine 2: 10-2005 with palletech. Pallet size 400 x 400 mm. Number of pallets 14. Movement x-Axis 510 mm. y-Axis 510 mm. z-Axis 460 mm. Table indexing (C-Axis) / NC Table 0,001°. Number of tools in magazine 30 pieces. Maximum spindle speed 35-12.000 min. Tool taper DIN 69871A. CNC control Mazatrol PC-Fusion-CNC 640 5x more
1
Immediate available Oklkvuv9 more
3
Georgii Kobold KSV 6/20 E1-M3-K4/Z1/P2/G1 AC servo MidiDrive, serial number according to the photo, used, low wear, 100% functional, included with com. photos Berj0dtfnl more
15
Four-sided hobble Quadromat 23 P by Weinig A video of the running machine can be sent on request. Spindles with radial and axial adjustment, therefore also suitable for profiling. Four waves: Lower shaft, directional spindle 4kW with original Weinig centro lock tool 240mm plus Falzfraeser Right and left wave with an engine, 7.5kW with original Weinig Centrolockout tool 130mm Upper Wave, Spindle 7.5kW with Original Wine Centrolockable Tool 240mm All spindle motors with automati... more
9

Welding Rotators BODE SAR 1000 50 ton Self Aligning Welding Rotator with Idler Support

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Control Variable Speed Capacity 50 ton / 50,800 kgs Be0tp0ruqg Work piece diameter Minimum 450mm, Maximum 5200mm Input 415/3/50 ac Fitted with Push Button Pendant Control Length Driver 10' / 3.05m Idler 7'2" / 2.18m Width 4'8" / 1.42m 3' / 914mm Height 3'5" / 1.04m 3'5" / 1.04m Nett weight actual. 5.23 ton / 5310 kgs more
5

Machining Center - Universal DMG DMC 80 U hi-dyn

Mönchengladbach, GermanyGermany dealership location
6363 km
2002
used
x-travel:800 mm y-travel:700 mm z-travel:600 mm c-axis:360.000 x 0,001 Grad pallet size::800 x 630 mm workpiece weight:800 kg spindle taper:HSK 63 number of spindle speeds:18000 U/min spindle motor:12 kW no. of tools in the magazine:120 Stück table turning speeds:13,6 U/min Bcm8z7bus9 weight of the machine ca.:10,5 t total power requirement:59 kVA dimensions of the machine ca.:8,1 x 6,2 x 3,2 m 5-axis machining center with SIEMENS 840 D CNC control - NC rotary table C-axis - swivable head B-... more
3
Pallet size 400 x 400 mm. Movement x-Axis 510 mm. y-Axis 510 mm. z-Axis 460 mm. Number of tools in magazine 60 pieces. Maximum spindle speed 25.000 R/min. Tool taper MAS BT-40 Big Plus. CNC control Mazatrol Matrix Ih8qdnsly more
3
370x520 mm (14.5x20″) Cvuevwrk approx. 60 mio. impr. CP-2000 Alcolor Autoplate Autom. ink roller wash-up device blanket- and impression cylinder wash-up device, Low-pile delivery, Perfecting 2/2, Stream feeder, Powder sprayer, Available: immediately more
3
Georgii Kobold KSV 6/20 E1-M3-K4/Z1/P2/G1 AC servo MidiDrive, serial number according to the photo, used, properly completely overhauled and tested, 100% work, included with com. photos Berj0nelbm more
8

Bridge crane ZKKE

Babberich, NetherlandsNetherlands dealership location
6312 km
ready for operation (used)
Make DEMAG YOP 2012 Technical data Spannweite25,000 mm Stenro Lifting height 12,000 mm Carrying capacity 32,000 kg Dimensions Length 25,000 mm Width 5,000 mm Height 1,600 mm more
1

Flypresses SWEENEY & BLOCKSIDGE No 4 Flypress

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Throat depth 5" Daylight 8" Fitted with SWING ARM Nmylt Equipment MOUNTED ON STAND Length 600mm Width 450mm Height 1900mm Nett weight actual. 290 Kgs. more
10

Screeners Rapid Trakmix 250

bt70 3ey, United KingdomUnited Kingdom dealership location
5402 km
ready for operation (used)
The Rapid Trakmix is a track-mounted mobile continuous concrete mixing plant/ pugmill. Trakmix is totally mobile, self-contained, fully weighed and outputs high volumes of up to 250 TPH. The machine has been specifically designed for applications where all types of binders or neutralising powders are required in the mixing process, including road construction, road paving, ground works/civil engineering, environmental stabilisation projects, aggregate recycling and many more. FEATURES The ONLY t... more
6
Drill SOLID type TB 10 Fabr. No. 77574 built circa 1975 Drilling capacity 10 mm Spindle retainer B-16 Throat depth 220 mm Pinolhub 80 mm Table size 300 x 225 mm Column diameter 76 mm Spindle speed of 980, 1960, 1500, 3000 rpm 4 levels Motor output 0,2/0,3 kW Power supply 380 v, 50 Hz -Spindle speed by 2 speeds and 2 belt levels Bnwzjtr -Chuck RÖHM 1 mm up to 13 mm -Drilling table height adjustment of clamping on the column Dimensions L x W x H 670 x 300 x 1000 mm Weight 60 kg go... more
8
Heidelberg Speedmaster 74 4, age 2012 520x740 mm (20x29.5"), approx. 58 mio. impr. Prinect Press Center 15.000 s/h Version Alcolor Autoplate Autom. ink roller washer Autom. blanket washer Autom. impressioncylinder washer Low-pile delivery Ngxjf Stream Feeder Powder sprayer Ultrasonic doublesheet control Antistatic device in feeder and delivery Etc. Available: immediately more
4
SEW eurodrive Movidrive MDx60A0220-503-4-00 SER.-No. 0357396 with MDX61B0220-503-4-00 control head SER.-No. 0043625, second-hand, low wear, 100% functional D9yr97 more
9

Bridge crane ZKKE

Babberich, NetherlandsNetherlands dealership location
6312 km
ready for operation (used)
Make DEMAG YOP 2012 Technical data Spannten25000 mm Hubhöhe12000 mm Sustainability 32000 kg Dimensions Length 25000 mm Width 4991 mm Height 1291 mm Gfwxcfp more
1

Flypresses SWEENY & BLOCKSIDE No 2 Flypress

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Table size 13 1/2 x 8" Throat depth 3 1/2" Daylight 6" Fitted with swing arm Equipment mounted on stand Be0tj20d9s Length 400mm Width 400mm Height 1750mm Nett weight actual. 110 Kgs. more
2

FANUC ALPHA 1iD - 2007 Wire cutting EDM machine FANUC ALPHA 1iD

Rolle, CH, SwitzerlandSwitzerland dealership location
6572 km
2007
ready for operation (used)
about 25'000  WORKING Axis 600x400x300mm Max workpiece XYZ 1050x820x400mm Max workpiece weight 1000 kg –The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change. more
7

Laser cutting machines Prima Power RAPIDO CP 4000

Kaiserslautern, GermanyGermany dealership location
6526 km
2014
ready for operation (used)
General Data Measurements width 6950 mm Measurements depth 5650 mm Measurements height 3750 mm Machine weight 18700 kg Main Drive Laser power 4 kW Movement X-Axis Accuracy 0.03 mm Y-Axis Accuracy 0.03 mm Z-Axis Accuracy 0.03 mm A-Axis Movement 360º B-Axis Movement +/- 135 º C-Axis Movement +/- 10 mm Table Outer length 4080 mm Outer width 1530 mm Height adjustment 765 mm Media Main electronic connection 400 V Power consumption 106 kVA Berannayz0 Additional Equipment Dust extractor... more
4
CP 2000 Alcolor Autoplate Ink unit temperarure control Autom. ink roller wash-up device Autom. blanket wash-up device Autom. impression cylinder wash-up device Bcuhk8pj9h High-pile delivery Perfecting 2/2 Streamfeeder Powder sprayer approx. 141 mio. impr. more
3
Maho 28A1 relay Board 28U1 adaptor Relayboard Id.Nr. 27.69 923, used, normal wear, 100% functional, included with com. photos Dmjrne2 more
3

Cutting mill Tria Schneidmühle Tria Typ 47-30 CN

Zuzenhausen, GermanyGermany dealership location
6602 km
ready for operation (used)
Power: 7.5 kW Suitability: Rubber, plastics, wood, organic matter 3-knife rotor Cyzpfpl8 3 stator knife rows Rotor diameter: 250 mm Working width: 460 mm Inlet cross-section: About 470 x 320 mm Drive engine: 7.5 kW (Machine number: 10999/used machine) more
8

Welding Rotators BODE SAR 1000 50 ton Self Aligning Welding Rotator with Idler Support

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Control Variable Speed Capacity 50 ton / 50,800 kgs Work piece diameter Minimum 450mm, Maximum 5200mm Input 415/3/50 ac Fitted with Push Button Pendant Control Length Driver 10' / 3.05m Idler 7'2" / 2.18m Width 4'8" / 1.42m 3' / 914mm Height 3'5" / 1.04m 3'5" / 1.04m Be0tprao3f Nett weight actual. 5 ton / 5090 kgs more
7
max. size 72 x 102 cm perfecting: 8/0 - 4/4 age 2007 CP 2000 ALCOLOR film dampenings ink unit temperature control cooling unit CombiStar (water-cooled) AUTOPLATE Plus automatic washing devices Tandem WashUp concept for printing cylinder PRESET Plus feeder Ibkcjkh PRESET Plus delivery antistatic device StaticStar dry sprayer PowderStar Duo Plus CAN powder absorbing CleanStar air supply cabinet AirStar (water-cooled) compressed air supply ScrollStar water cooled machine incl. chi... more
8

Lathes SEIDLER VERTIMAXX 2000

Kaiserslautern, GermanyGermany dealership location
6526 km
2004
ready for operation (used)
Control Unit Brand SIEMENS Model SINUMERIK CNC main language german CNC language customizable Yes E2g9gey0 Main Drive Number of spindles 1 Spindle speed range 250 rpm Movement X-Axis Movement 950 mm Y-Axis Movement 950 mm Z-Axis Movement 1360 mm Workpiece Workpiece drm 2000 mm Tools Slots in storage 4 Media Power consumption 60 kW This SEIDLER VERTIMAXX 2000 Lathe from Germany was manufactured in 2004. Operated through a SIEMENS SINUMERIK Control unit, this machine incorporates a spindle ... more
5

4-Colour printing press Heidelberg Speedmaster 52 4P

Verl, GermanyGermany dealership location
6460 km
2003
good (used)
- Classic Center - Alcolor - Autoplate - Autom. ink roller wash-up device - Autom. blanket wash-up device - Autom. impression cylinder wash-up device - Low-pile delivery - Silverline - Perfecting 2/2 - Stream feeder - Powder sprayer 30frqow - Etc. Available: immediately more
5
HEIDENHAIN LS 706 lengths dipstick Id.Nr.: 277 504 25 ML 920 mm, serial number according to the photo, included with com. used, normal wear, 100% functional, photos Beesveha9f more
2

Cutting mill Pallmann Schneidmühle Pallmann Typ PS 3-7,5

Zuzenhausen, GermanyGermany dealership location
6602 km
ready for operation (used)
Power: 7.5 kW Suitability: Foil, small parts 3-knife rotor (rotor knife 3x2) 2 Stator series Rotor diameter: 230 mm Rotor width: 750 mm Inlet cross-section: About 320 x 750 mm Jvbgt3 Propulsion: 7.5 kW (Machine number: 11066/used machine) more
1

Flypresses SWEENEY & BLOCKSIDGE No 4 Flypress

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Throat depth 5" Daylight 10 1/2" Equipment SWING ARM Features MOUNTED ON STAND Ptyxhu Length 600mm Width 400mm Height 2100mm Nett weight actual. 290 Kgs. more
2
230 volts, 0.55 KW Drilling power Steel 20mm Charge 170mm Pino-pin ub 80mm Otgyd09w Recording MK 2 Speed 210-2200 U/min. Table size 275 x 275mm Drill inclined +/-45 °, rotating 360 ° With machine screwstick and fast release lining 1-16mm Weight 51 kg more
12

Machining centers (vertical) Bridgeport GX 600

More Bridgeport Gx 600
Kaiserslautern, GermanyGermany dealership location
6526 km
2007
ready for operation (used)
Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle speed range 8000 rpm Spindle motor power 15 kW Movement X-Axis Movement 600 mm Y-Axis Movement 540 mm Z-Axis Movement 540 mm Table Outer length 750 mm Outer width 540 mm Gvuoho Turret Number of tool slots 20 This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Application Types Mill... more
5
Ojzopded 360x520 mm (14x20″) Approx. 94 mio. impr. Standard dampening Perfecting 1/1 Plusversion Powder sprayer Single-sheet feeder Available: at short term more
3
HEIDENHAIN TE 400 Panel Id.Nr. 250-517 03, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bc9hjrsnig more
6

Cutting mill Wanner Schneidmühle Wanner Typ E 45.50

Zuzenhausen, GermanyGermany dealership location
6602 km
ready for operation (used)
Power: 30 kW 3 knife rotor 2 Stator series Rotor diameter: 400mm Working width: 500mm Onkwn399 Inlet cross-section: About 500 x 530mm Weight: About 1,600 kg Drive engine 30 kW With noise protection equipment (Machine number: 11086/used machine) more
3

CNC Bed Millers CORREA A20-25 2500mm x 800mm CNC Bed Miller. Heidenhain TNC 320 Control

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 9211604 Control Heidenhain TNC 320 Table Size 2500mm x 800mm X Axis Travel 2200mm Y Axis Travel 1000mm Z Axis Travel 1000mm Spindle Taper ISO 50 Head Swivels 360 degrees on 2 faces Input 415/3/50hz Spindle Speeds 40 - 2000 rpm 2b9z23az Feed Rate 10 / 5000mm / min Fitted with Coolant, Hydraulic Tool Clamping, Pendant Control Length 4400mm Width 3100mm Height 3250mm Nett weight actual. 11,900 Kgs. / 11.75 Tons. more


id 5005
daily

New machines via email!

Stay updated!

to

to

Edit search
ID 5005
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.