Ac motor buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Gvruocpx3 BLACK BROTHERS Air Pod Press with Motorized Opening; -- Platen size (overall): 122" x 51", Side loading on 122" side, (2) Zoned upper platens of 61" length each. -- 2" - 49" Motorized adjustable opening. -- 50 PSI pneumatic pressure via twin-bellow air pods in upper platens. -- 5" Air Pod stroke for pressure and return spring assembly for release & opening. -- (4) Air loaded roller rails across width of lower platen for easy loading. --... more
4
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor -4.4 kw 5880 rpm at 100 Hz -3.0 kw 2880 rpm at 50 Hz L3km2 Recording shaft Ø 35 mm Weight 34 kg more
7
Motor-driven folding machines Fabr.FASTI plant type: 212 20/6 BJ. 1984 delivery 22.01.1985 Working width max: 2040 mm Bcy70esg Matrial thickness: Max 6mm More data see data sheets. more
5
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Yrdmx90 more
Permanent magnet diamond Type 063C-0-MS-3-C/095-B-1 Tz0cfq0x more info-en please refer to the Typenschild Storage tracks s photo more
6
Make: Fasti Type: 2095-16-3 Hvmlvdx Year of construction: 1983 Sheet width: 1620 mm Sheet thickness: 3 mm Backgauge - adjustable: 500 mm Stroke: 350 mm Space requirements: approx. 2.7 x 1.5 x 2.0 m Machine weight: 3 tons Facilities: -Bending angle adjustment via potentiometer -Manual back gauge All information without guarantee. The machine is located in a very good condition. A demonstration is at any time possible in our showroom. more
6
Vehicle data - make: Clark - type: C 80-600 3F470 Deutz motor - drive type: diesel - carrying capacity: 8000 kg - load Centre of gravity: 600 - lifting height: 4700 mm - range: 0 mm - year: 2016 - operating hours: 152 - internal No.: 290418 _ _____ Mast data - mast type: triplex - lifting height: 4700 mm - height: 2665 mm - free lift: 1563 mm - carriage: 0 mm - forks: 1200 x 150 x 70 mm _ Dimensions - length: 3895 mm - width: 2125 mm - height: 2665 mm - weight: 10500 kg _... more
4
Permanent magnet motor, permanent magnet motor, gear motor, electric motor, servo motor Speed 2000-3000 R/min Performance type B5 2zf0iqit Diameter shaft Ø 50 mm Weight 150 kg more
4

Motor spindle Tramece AC 5 TRAMEC GmbH

Naumburg, GermanyGermany dealership location
6541 km
used
Cone: HSK 63 A UPM: 15000 Rotary feedthrough: no Lubrication: Grease Internal cooling: no Jflr8ji more
5
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos 08xp0ht2 more


ac motor
daily

New machines via email!

Stay updated!
2

Motor SIEMENS 1FT6105-1AC71-1EG1

Göppingen, GermanyGermany dealership location
6699 km
used
power capacity unbek. kW volt unbek. V ampere A total power requirement kW weight of the machine ca. t dimensions of the machine ca. m U2iqtchdf more
5
Make: Fasti Type: 2095-10-4 Year of construction: 1992 Sheet width: 1020 mm Sheet thickness: 4 mm Dimensions: approx. 2.00 x 1,20 x 1,70 m weight: approx. 2 t Facilities: -Bending angle adjustment with digital display Bcsf3xy3hu -Operating instructions All information without guarantee. The machine is located in a very good condition. A demonstration is at any time possible in our showroom. more
1

decoiler (motorized) HACK MBH6

Norderstedt, GermanyGermany dealership location
6479 km
1990
used
very good condition max. coil diameter 1000mm Ncmnn capacity 1000kg coil inner diameter adjust 50 mm dimensions 100x180x40cm output 30 UPM more
4
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor Wkoirsw7b -3 kw 1120 rpm recording wave Ø30 mm Price per piece -1 x available -Abmasse 985/290/H185 mm Weight 68 kg more
3
DC servo motor Siemens 1HU3078-0AC01-0ZZ9 with speedometer 1HU1052 used, tested, new bearings Hebe3v2f more
4
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Ysixe0lj more
6

Motorized beading machine FASTI 401 45 - 0,8 mit Motorantrieb

Staufenberg, GermanyGermany dealership location
6563 km
1983
good (used)
Motorized swaging machine Fabr. FASTI type 401 45 - 0.8 8341. No. 106, built 1983 Technical data: Roller centre distance 45 mm maximum sheet thickness 0.8 mm Gr. Throat depth 180 mm Working depth 185 mm Dimensions L x W x H approx. 200 x 500 x 600 mm Weight 22 kg Psna3y with: -Motor drive 0.25 kW -Base -Foot switch The machine is originally hand operated and was rebuilt in self-made on motor drive used, in good condition more
5
Make: Lotze Type: 117-3000-10 Year of construction: 1995 Nffhj Performance: 10 mm Length: 3040 mm stroke of the upper beam: 500 mm Stroke of the beam: 75 mm upper beam power: 3,0 kW Beam power: 10,0 kW Dimensions: approx. L 5.00 x B H 3,30 x 2,30 m Weight: approx. 16.3 t facilities: • bending rail • Motor-driven bending beam adjustment • control HL360 • CNC - controlled. Backgauge all information without guarantee. The machine is located in a very good condition. A demonstration is a... more
1

decoiler (motorized) HACK MBH6

Norderstedt, GermanyGermany dealership location
6479 km
1990
used
very good condition max. coil diameter 1000mm capacity 1000kg coil inner diameter adjust 50 mm dimensions 100x180x40cm output 45 UPM Bbxvuzd8jm more
4
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor -3 kw 1720 rpm recording wave Ø30 mm Price per piece -1 x available -Abmasse 910/290/H190 mm Bm7xs3ji Weight 58 kg more
3
Vectorachsenmotor complete with gearbox and encoders taken from a CNC scm record 2 at their disposal Engine: TAMAGAWA SEIKI 3351N16E196 Encoder: EH38M500Z5L6X3PR Number according to the spare parts catalogue of the machine: 1036238013 C. The engine was rebuilt. 6 months warranty Exchange price! Wnyw8sh0h more
8
Nippon Gerotor 100-2PC-2AH0-HL index engine, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bcnnierkpo more
6

Motorized beading machine MBT 1.5 mm Ausl. 300 mm

Staufenberg, GermanyGermany dealership location
6563 km
1987
good (used)
Motorized swaging machine type MBT 1.5 Fabr. # 1790, built in 1987 Technical data: maximum sheet thickness 1,5 mm Distance between axes 80 mm Working depth 300 mm Working speed 12 m / min 1.5 kW External dimensions 857 x 538 x 1340 mm Lhdm70t8y Weight 370 kg with -Foot switch -1 pair roller on the machine used more
4
Make: Fasti Type: 2075 - 1020-4.5 Bcrcthqrzg Year of construction: 1981 Thickness: 4.5 mm Bending length: 1020 mm Dimensions: CA. L B 2.20 x 1,60 x H 1, m Weight: 1,5 t All information without guarantee. The machine is located in a very good condition. A demonstration is at any time possible in our showroom. more
1

decoiler (motorized) HACK MBH6

Norderstedt, GermanyGermany dealership location
6479 km
1990
used
very good condition Muctbo max. coil diameter 1000mm capacity 1000kg coil inner diameter adjust 50 mm dimensions 100x180x40cm output 30 UPM more
4
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor -3 kw 1420 rpm recording wave Ø30 mm Price per piece -1 x available -Abmasse 670/290/H190 mm Weight 57 kg Guezbg more
14
BEARING RESOLUTION CA. 30 PCS ELECTRIC MOTORS,. 8 CABINET APPARATUS CABINET MACHINES, 1 LEAF ROLLER ALBER, 3 SHARPENING CAR MATE RIVO, LOROCH, 5 HYDRAULIC AGGREGATES. TOTAL EUR 12 000 + VAT Gz3bcdbyi more
4
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Hejri329k more
3

Motorized Folding Machine LOTZE HZK 25 2500x3 mm

Staufenberg, GermanyGermany dealership location
6563 km
good (used)
Motor-driven folding machines Fabr. LOTZE type HZK 25 Fabr.# 962061, built in 1952 - refurbished in 1962 Lddlh Technical data: maximum working length 2500 mm maximum sheet thickness 3.0 mm KL. Inside bend RADIUS 4.0 mm Gr. Opening of the upper cheek 300 mm The beam opening distance 40 mm Working height 800 mm Power 3,5 / 2,2 kW Dimensions 4200 x 1400 x 1600 mm Weight approx. 3.75 t with -Gearshift transmissions for opening and closing, Bending back and forth used, in good cond... more
8
Make: Fasti Type: 212-20-3 Year of construction: 1989 Length: 2040 mm thickness: 3 mm dimensions: L 3.50 x B 1.60 x H 2,10 m weight: approx. 4 t facilities:-driven Backgauge 1000 mm (dismantled) -Split Geissfuss Izeyukp -Control: FASTI-MATIK CNC4000 All information without guarantee. The machine is located in a very good condition. A demonstration is at any time possible in our showroom. more
3

Electric Motor Hydac G90M2 Hydac G90M2

Leipzig, GermanyGermany dealership location
6734 km
used
50Hz, 3,6kW, 275/480 1/min 3460Shaft diameter 24 mm 7nmjcnpak more
5
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor -1 x motor 0.3 kw 17300 U/min at 300 Hz Turn insert cutters Recording diameter 20 mm with keyway -3 x engines available Award pieces 3lw3ml8z Weight 4 kg / piece more
7

tornio cnc motorizzato TECNOMAC tornio cnc motorizzato TECNOMAC

Codevilla, ItalyItaly dealership location
6846 km
ready for operation (used)
Tornio cnc , TECNOMAC ,tipo Argo 120, -Hp 120 mm.-Dp 350 mm. - Pb 30 mm. Rpm mandrino 4000 - Rpm utensili motorizzati 6000 , Rpm utensile asse Y 3000 - Torretta 8 utensili , 4 motorizzati . -Cnc ECS 1400D, Anno 2001 , -Dimensioni d’ingombro cm. 150x130xh140 -Peso kg1500. Bcp7qgvjqx more
4
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bcnnhh7ztl more
2

Motor-driven folding machines KRAMER AMaut II 2000x2 mm

Staufenberg, GermanyGermany dealership location
6563 km
1985
ready for operation (used)
Motor-driven folding machines Fabr. KRAMER type AMaut II. Masch.#. 45858, built 1985 Djjk2pb Technical data: Atbeitslaenge 2025 mm maximum sheet thickness 2.25 mm KL. The bug width 5 x s KL. Inner radius 1.5 - 2 x s Adjustment of sub - and bending flange 90 mm for round bending 90 mm highest working position of the upper beam 190 mm Gr. Opening of the upper beam 290 mm Power 3,0 / 1,1 kW Duration of a workflow 7.0 seconds. Weight approx. 2450 kg External dimensions approx. 3000 ... more
5
Make: HERA Type: 40/3 Year of construction: 1977 Sheet width: 4000 mm B9r0lm0y Sheet thickness: 3 mm Dimensions: CA. L B 5.50 x 2.00 x H 2.00 Weight: approx. 5T Facilities: -Bending angle adjustment via Potentiometer All information without guarantee. The machine is located in a very good condition. A demonstration is at any time possible in our showroom. more
2
50Hz, 1,1kW, 220,380, 1/min 2825-3390Shaft diameter 19 mm 7nmlffwmr more
4
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor Power 0.4 kw 11300 rpm at 200 Hz Voltage 133 v Recording shaft Ø20 mm Links thread Tool mm -2 x engines available Award pieces Dimensions 250/60/H155 mm Weight 3,4 kg Etahph7 more
5
Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bjgsfexi more
4

Motorized Folding Machine LOTZE HZK 25 2500/3 funktionsbereit!

Staufenberg, GermanyGermany dealership location
6563 km
ready for operation (used)
Motor-driven folding machines Fabr. LOTZE type HZK 25 2500/3 Built in 1956-technical data: Working length 2500 mm maximum sheet thickness 3.0 mm KL. Inside bend RADIUS 4.0 mm Gr. Opening of the upper cheek 300 mm Jl8pws3hg The beam opening distance 40 mm Working height 800 mm Power 3,5 / 2,2 kW Dimensions 4400 x 1000 x 1600 mm Weight approx. 3.75 t used, ready! more
6
Motor-driven folding machines Fab.RAS type 67.30, 3200 x 2.5 mm Very good condition, BJ. 1990 Make: Remote access Model: 67.30 Year of construction: 1990 Power: 2.5 mm Bcnx79f9pj Capacity: 3200 mm Motor power: 3 kW Dimensions: approx. L 4.20 x B 2.10 x H 1,65 m Weight: approx. 4.1 tons Facilities: • MULTIBEND 8000 control •-driven Backgauge 10 1500 mm All information without guarantee. The machine is located in a very good condition. A demonstration is at any time possible... more
4

Motor SIEMENS 1FT 5064-0AC01-2-Z

Willich, GermanyGermany dealership location
6368 km
used
Torque 10 Nm volt 24 V weight 20 kg power capacity kW ampere A total power requirement kW weight of the machine ca. t dimensions of the machine ca. m S3vtw3esr more
5
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor Power 0.4 kw 11300 rpm at 200 Hz Ql78m2tzg Voltage 133 v Recording shaft Ø20 mm Tool mm -3 x engines available Award pieces Dimensions 250/60/H155 mm Weight 4,2 kg more
4
Speedometer for electric motors from Baumüller engine VDOKFF 132 S43, used, normal wear, 100% functional, included with com. photos Juyy3u more
4

Motorized Folding Machine KRAMER AMH II 1020x3,25

Staufenberg, GermanyGermany dealership location
6563 km
good (used)
Motor-driven folding machines Fabr. KRAMER type AMH II. Year absent Technical data: Usable length 1020 mm maximum sheet thickness 3.25 mm Gr. Opening of the upper beam 290 mm Gr. Adjustment speed of under and bending flange 90 mm Dimensions L x W x H 1600 x 700 x 1500 mm Weight approx. 1300 kg Ozbky3hup with: -Rear gauge -Foot switch - separate control panel used, in good condition more
6
Straightening machine, band VG Gearmotor LENZE setting device Type 11.712.02.10 Output speed 12 to 72 RPM infinitely variable geared motor Torque 80 to 40 nm Roller speed limit 19-115 RPM. Set roll width 520 mm Rollers diameter 90 mm Setting rollers number total 4 pieces Engine power 0.37 kW Power supply 380 v, 50 Hz -stepless speed adjustment via hand wheel to the geared motor -Drive on open gear drive -Set roller top mechanically to the adjust -on stable metal substructure -Strai... more
2
Sale of machine to remove electric motors of second hand. The machine makes the dismantling of small and medium electric motors. It is designed to recycle scrap metal and break the motor housing. It is used to cut or break electric motors. Ss3kr8 Machine to recycle electric motor scrap by breaking the motor box - cast iron, cutting the motor stator in half and separate copper coil and steel completely. Machine with electric operation. more
5
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor Geared motor of 0.3 kw 12000 U/min at 200 Hz Recording ø 20 mm -3 x engines available Prize piece Weight 3 kg Qleg802g2 more


ac motor
daily

New machines via email!

Stay updated!

to

to

Edit search
AC MOTOR
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close