Used Turning Machine for sale (66,782)

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Type of machine: NEF Plus 500 Year of manufacture: 1995 Control system: Gründig Machine's weight: 2650 kg Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Hsdotpn S Ispfx Ak Ujnu Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Spindle opening: 70 mm

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, Technical Data Max. workpiece diameter: 3,800 mm Max. rotational speed: 100 min⁻¹ Workpiece clamping: manual Chuck: Röhm Tool holder: Capto C8 Tool magazines: 2 × 47 slots (94 slots total) Travel Paths X1-axis (right support): 3,200 mm X2-axis (left support): 2,800 mm Z1-axis (right support): 750 mm Z2-axis (left support): 750 mm Workpiece Spindle Speed range up to 100 min⁻¹ Nominal power: 67.4 kW Maximum power: 202.2 kW Max. torque: 71.6 kNm Max. table load: 35,000 kg Water-cooled motor spindle Multifunction Head B-axis with stepless positioning Swivel range: 180° Driven tools up to 6,000 min⁻¹ Hydraulic clamping Direct measuring system High-pressure cooling up to 70 bar Hjdpozwa Rbjfx Ak Usnu Tool Magazines 2 chain magazines with 47 slots each Tool diameter up to 120 mm Up to 150 mm with appropriate magazine configuration Max. tool length: 400 mm Max. tool weight: 20 kg Chip and Coolant System 2 Knoll chip conveyors Knoll band filter system KF400-2300 Electrical Data Operating voltage: 3 × 400 V AC Protection class: IP55 Connected load: 280 kVA Control: Siemens SINUMERIK 840D sl Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Year of construction: 2023, 400mm swing, Hjdpfx Akez Srv De Uonu 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Ceever Spraymaster Turning Spray Washing System The industrial washing systems in the Spraymaster series are advanced solutions for spray cleaning small to medium-sized components with a capacity of up to 4,000 kg. Thanks to a rotary table that enables uniform wetting of the parts with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thereby optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 Volt Hedpfx Akjx Ex Nzs Uenu Current consumption: 90 A Connected load: 62 kW You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Hjdpfx Asz Dtb Rsk Uonu Power supply: 400 V Flexible speed control.

Condition: used, For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Hsdsztv Afspfx Ak Usnu - 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: used, WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Technical data: Hsdpfx Akjztv A So Usnu - Year of manufacture: 1997

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis Hedpozz I N Tjfx Ak Usnu FANUC 31i B5 NT-Smart control Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Tool changer 120 positions Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Hodpjw T Sn Esfx Ak Usnu Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: excellent (used), Year of construction: 2014, control Fanuc 31/32 i 2 chucking diameter 170 mm swing diameter 210 mm x-travel 400 mm z-travel 200 mm length 2500 mm width 1900 mm Hnodeyvvupspfx Ak Uou height 2300 mm weight 5500 kg

Condition: excellent (used), Year of construction: 2019, Sub-spindle, driven tools, Y-axis, C-axis FANUC 32i B-NT-SmartX control Turning diameter max 225 mm Turning length -910 mm Chuck Diameter -210 mm Main-spindle speeds 5'000 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Barloader LNS Sprint 565 S2 Piece catching device Hjdpfxsvwkire Ak Uenu Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Hnodpjx A Eupsfx Ak Ueu Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly Hjdezz S R Ispfx Ak Uenu stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, L + Z lathe WEILER, type LZ PRIMUS GS Machine no. 1984, year of manufacture 1981 Distance between centers 400 mm Turning diameter over bed 250 mm Height of centers over bed 125 mm Turning diameter over carriage 140 mm Height of centers over carriage 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm, 18 steps Feed in longitudinal and facing directions Chuck flange, short taper DIN 55022, size 4 Tailstock internal taper MK 2 Hedpfx Aez N H Dqek Ujnu Drive power 1.1 kW and 1.5 kW, pole-reversing Power supply 380 volts, 50 Hz - Spindle speed controlled via 2 motor speeds and 9 gear stages - 3-jaw chuck WEILER, Ø 125 mm, with soft jaws - Quick-change tool holder MULTIFIX with 2 interchangeable cassettes - Coolant system - Collet set Ø 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 15 / 16 / 18 / 20 mm - 1 centering point for collet chuck - Turning center flange - Emergency stop - Folding chuck guard with electrical monitoring - Splash guard Space requirement L x W x H 1200 x 650 x 1380 mm Weight 325 kg Good condition

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. Hnjdpfjwym Nfex Ak Uju TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 1994, Technical details: turning diameter: 200 mm swing diameter: 260 mm turning height: 200 mm Tool table: 1054 x 400 mm Dimensions (L/W/H): 2200 x 2300 x 2300 mm weight: 3300 kg slide travel radial ( X-axis ): 520 mm Hnedpoyk Utrjfx Ak Uou slide travel axial ( Z-axis ): 200 mm no pallet circulating belt, no C-axis, no driven tools *

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Hnjdpfxovxa Tpo Ak Ueu Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: ready for operation (used), Year of construction: 2010, Make: SPINNER Type of machine: TC 400-52 MC Year of manufacture: 2010 Control system: Siemens SINUMERIK 840D SolutionLine Machine's weight: 4.000 kg Tool holder: VDI 30 / DIN 69880 x-travel: 200 mm y-travel: nicht vorhanden z-travel: 515 mm Speed range: bis 5.000 U/min Spindle lock: A6 Cutting diameter: 280 mm Hedsz I Nawopfx Ak Uenu Driven tool: Ja Turning length: 500 mm Chip removal device: Ja Tailstock: Ja, hydraulisch / MK4 Overall dimensions: 2.100 × 1.350 × 1.800 mm (ohne Stangenlader) Chuck size: 210 mm Chuck size: 210 mm Traverse Z-axis: 515 mm Tool turret - slots: 12 Counter spindle: Nein C-axis: Ja Spindle opening: 52 mm

Condition: good (used), Year of construction: 2010, machine/vehicle number: 11176, Offer 25439 Technical data: - Abrasive diameter: 150 mm - Swivel head – grinding unit pivotable and tiltable on articulated arm - Dust drawer - Disc speed infinitely adjustable - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm - Drive: 400 V / 0.75 kW Hedpfjyapx Ujx Ak Uonu - Pneumatic connection: 6 bar - Space requirement approx.: W 1700 x H 1700 x D 1300 mm - Weight approx.: 400 kg

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Hodpfx Akozacwds Ujnu Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: good (used), Heid S-200 CNC lathe Manufacturer: Heid Type: S 200 Machine type: CNC lathe Tailstock travel: 175 mm Tailstock quill: Morse taper: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Clamping force: 17 kN Connection 50 Hz 3-phase: 380 Volts Total power requirement: 65 kVA Spindle speeds: Continuously variable from 0 RPM to: 4000 RPM Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter over bed: 420 mm Turning diameter, maximum: 250 mm Turret: Hjdpfx Aksx Elw Ee Usnu Longitudinal travel (Z-axis): 1150 mm Cross travel (X-axis): 230 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, Technical Data Max. Workpiece Diameter: 3,800 mm Max. Rotational Speed: 100 min⁻¹ Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 × 47 slots (94 slots total) Travel Paths X1-Axis (Right Support): 3,200 mm X2-Axis (Left Support): 2,800 mm Z1-Axis (Right Support): 750 mm Z2-Axis (Left Support): 750 mm Workpiece Spindle Speed Range up to 100 min⁻¹ Nominal Power: 67.4 kW Maximum Power: 202.2 kW Max. Torque: 71.6 kNm Max. Table Load: 35,000 kg Water-Cooled Motor Spindle Multifunction Head B-Axis with Stepless Positioning Swivel Range: 180° Driven Tools up to 6,000 min⁻¹ Hydraulic Clamping Direct Measurement System High-Pressure Cooling up to 70 bar Tool Magazines 2 Chain Magazines with 47 Slots Each Tool Diameter up to 120 mm Up to 150 mm with Appropriate Magazine Loading Max. Tool Length: 400 mm Max. Tool Weight: 20 kg Chip and Coolant System 2 Knoll Chip Conveyors Knoll Band Filter System KF400-2300 Electrical Data Operating Voltage: 3 × 400 V AC Protection Class: IP55 Connection Power: 280 kVA Control: Siemens SINUMERIK 840D sl Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes Hnedpfszu S U Hsx Ak Uju

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment:  2 ATS tables (spring-mounted table) Hodpfx Ajza Dwxjk Uonu  2 diamond cup wheels 175x60x51 mm  Column design

Condition: used, CNC Turning and Machining Cente: Hedpfezwn Sgox Ak Uonu Gildemeister/DMG Mori CTX2500/700 Year: 2019 Serial No.: 02620000651 2 driven spindles, rated speed 4,000/5,000 rpm, net weight 6,360 kg, accumulated operating hours 44,087 h, spindle hours: 27,832 h, cooling unit, chip conveyor, coolant treatment system, control system model: Ergoline, tool turret, 14 positions, for driven tools

Condition: excellent (used), SMT Turning Lathe 80001350 This machine was designed and manufactured to produce rotor shafts for electric power tools. The machine was designed and manufactured to automatically perform the following operations: - Automatic loading/unloading of parts from/to the tool carrier line using a pick-and-place unit between the shaft ends. - Turning the ring seat + plunge cutting the commutator + turning the commutator. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programs to manufacture different parts. Each program corresponds uniquely to a shaft type. Technical data Anchor shaft length from 92.5 to 163.1 mm Hnodjhw Emqjpfx Ak Usu Bearing journal diameter, commutator side: 8; 10; 12.5 mm Drive side: 12; 8 mm Min. available length at the bearing location: 3.6 mm Package diameter: 52; 55; 59 mm Ring dimensions Outer diameter: 40 - 57.4 mm Inner diameter: 37.4 - 56 mm Ring width: 4 - 8 mm Ring seat diameter: 44 - 50 mm Surface roughness of ring seat: Rz 20 mm Main dimensions and weight of the machine Machine length: 2870 mm Machine width: 2600 mm Machine height: 2530 mm Machine weight: 5000 kg Electrical installation Rated current: 10 A Rated voltage (AC): 400 V Rated power: 7 kVA Rated frequency: 50 Hz Pneumatic installation Nominal pressure: 5 bar Maximum pressure: 10 bar You can find more items – new and used – in our shop! International shipping costs available upon request!