Veneer saw with planing unit

Langzauner

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Tedpfxj Afznus Afgsd Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head cutting length 3050 mm Tsden An A Tspfx Afgjd with rear support and fence

Condition: good (used), Year of construction: 1999, High-quality veneer cutter with a maximum processing length of 3600 mm. Features a programmable width stop. Todpfxs Ahgais Afgod Includes a spare blade.

Condition: excellent (used), Year of construction: 1999, Pressing area: 2500 x 1300 mm Opening width: 400 mm Number of press cylinders: 6 Total pressing force: 90 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx.: 20.0 kW Space requirement (L x W x H) approx.: 3000 x 1500 x 1950 mm Weight: approx. 3800 kg Hydraulic heating plate press, with lower plunger design BUSSE electric heating plates, gold anodized, lower plate NEW Digital temperature display and control for heating plates Pressing pressure can be continuously adjusted by means of a pressure switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Central control panel at the front Rack and pinion compensation for uniform closing Safety release cord Main switch, lockable Opening automation Stroke limitation Lateral table extension with roller, extendable CE Note regarding used machines: • Errors in technical specifications and prior sale reserved. • Stated prices are ex-works prices – free loading! • The machine has been cleaned and functionally tested. • All machines are sold as is, as viewed, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in written form. Todpfx Aoz Ua R Uefged (We will only answer inquiries if you provide your address and telephone number!)

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit Todpfx Aog Tu Rkofgsd protection spraying edge nesting pneumatic 3-point adjustment

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: Tedpfx Aeuxqzuefgjd - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Tedpfxett Da Do Afged Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) Tsdpfxettakhj Afgsd - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Sanding belt oscillation Tedpfx Afexr Dfljgod

Condition: excellent (used), Year of construction: 1999, Double-sided multipurpose edge sanding machine with oscillation and 200mm sanding height Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side 200mm sanding width Motorized sanding belt oscillation, therefore no compressed air connection required Drive motor 400V / 3kW Front work table for sanding veneer edges with a grooved stop guide (for veneer overhang) Veneer sanding device with fine adjustment, foldable Spring-loaded table, adjustable in height and can be positioned to the side Angle stop Rear adjustable work table for sanding solid wood Both tables are height-adjustable to utilize the sanding belt Belt dimensions 3000 x 200mm Side extension table for radius sanding on the 150mm belt roller Feed support holder 68mm Central dust extraction connection 140mm Very stable frame, 2 swivel casters, 2 steering casters, and a lever brake for locking Tedez I T Apopfx Afged CE marking All graphite pads and dust extraction hoses have been replaced Original paint, only touched up in a few places Excellent condition from a small restoration workshop Some sanding belts are included Dimensions approx. 1800 x 1000 x 1250mm (LxWxH). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Tedsw Hfzajpfx Afged Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Flexible heating options to match available energy sources

Condition: used, Year of construction: 2010, power: 6.5 kW (8.84 HP), Long-belt sanding machine suitable for sanding both large containers as well as standard sheets and smaller components. The machine can also be used as a standard-height machine! Tedpfxjywzvhs Afged

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding belt length: 3,000 mm, grinding belt width: 150 mm, table height adjustment: 180 mm, input frequency: 50 Hz, Langzauner LZK 3/4 oscillating edge sanding machine, with veneer edge sanding attachment and feed console Sanding unit adjustable from 0-45° Oscillation Miter stop Height-adjustable sanding table (180 mm) for utilizing the full width of the sanding belt Table size (front) 1000 x 350 mm Table size (side) 400 x 250 mm Connection power 4.6 kW Belt length 3000 mm Belt width 150 mm Belt speed 22 m/s Weight approx. 350 kg Space requirement 1770 x 730 mm Tedpfsz D Autjx Afgsd Year of manufacture 1997 Condition: Functionality tested

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Todsxix Hxspfx Afgsd Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 21370-07-1268, functionality: fully functional, Available from April 1, 2027, for self-dismantling and self-collection. Langzauner heating press / veneer press, type LZT 100-SF, manufactured in 2007. The machine is suitable for pressing and gluing sheet materials, veneers, and comparable workpieces. It features heated press surfaces and a hydraulic pressing device. The upper and lower heating elements can be switched on separately. Technical data • Manufacturer: Langzauner • Type: LZT 100-SF • Year of manufacture: 2007 • Factory number: 21370-07-1268 • Heating: upper and lower heating • Temperature display: separate for top and bottom • Pressing time: adjustable • Opening time: adjustable • Automatic opening: available • Electrical connection: 3 × 400 V + N • Frequency: 50 Hz • Rated current: 42.2 A • Connected power: approximately 27 kW according to the nameplate • Hydraulic press with 6 press cylinders • Safety cable / safety device • Press surface heating plates in top condition, no damage Tjdpfjz Dai Uox Afgsd • Heating plate size: 3,000 × 1,300 mm • Max. press opening / stage clearance: 400 mm • Total pressing force: 100 tons • 6 press cylinders • Electric heating plates