Used Mortising Machine for sale (64,824)

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Cjdpfxs Aa A Eqj Aktjri Stop for length adjustment when milling elongated holes. 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: good (used), functionality: fully functional, Year of construction: 1970, overall weight: 2,500 kg, broaching length: 300 mm, total length: 2,000 mm, total width: 2,000 mm, GSP M743 mortising machine Cjdpfx Aksz Ingvstsri Travel: 0 to 300 Stroke: 3 to 52 Weight: 2.5 tons Rapid traverses on both axes Rapid traverse on table rotation, diameter 700 In very good condition

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Codpfx Aoz Efwysktori Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, Camam horizontal and vertical double mortising machine Cedpfx Ake Ahgp Aetjri

Condition: used, Year of construction: 2023, Used Machine Year of Manufacture: 2023 Condition: Like new; only a few drill holes have been made Features and Technical Specifications: - Spindle speed: 3,000 rpm - Drilling width: 240 mm - Max. drilling depth at 90°: 180 mm - Drill head height adjustment: 160 mm - Tool clamping range: 0–20 mm - Work table rotation: ±60° - Work table length: 565 mm - Work table width: 315 mm - Exhaust port diameter: 90 mm - Output power: 2.2 kW - Supply voltage: 400 V - Power frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Cjdpfx Aozk Ni Tekteri Weight: 260 kg Availability: Available shortly Location: Röllbach

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Codpfxozy I Tce Aktjri

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Credpfxeyuty So Aktji Delivery in as-inspected condition, without warranty or guarantee

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Crodpfx Akeythcretei Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, Year of construction: 1993, Used Machine Codsz I Uffopfx Aktjri Year of Manufacture: 1993 Features and Technical Specifications: - 2-jaw drill chuck for shanks up to 20 mm in diameter - Pneumatic position adjustment - On 2 levels: 0–100 mm - Max. drilling depth: 150 mm - Precision indexing rail, 12 mm - Center locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor: 1.5 kW - Speed: 2,800 rpm - Lowerable slotted hole drilling unit with 2 program cams - Machine weight: approx. 310 kg - Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop)

Condition: used, Year of construction: 1984, used, in good condition Cleaned Function-tested Test run Manufacturer: Kölle Model: L2 Crsdpsy Apfnofx Aktei Year of manufacture: 1984 Machine no.: 1788 Motor: 1.5 kW 2-lever operation Chuck runout max. 8/100 mm Table size: 520 x 290 mm Drill chuck: 20 mm Dowel drilling unit with 4 stops: 16, 22, 25, 32 mm Workpiece stop Digital height adjustment display Required space approx. 1000 x 1200 x 1300 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, function-tested without refurbishment, without warranty or guarantee

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Features and Technical Specifications: - Drilling depth adjustment via a maintenance-free linear guide - Efficient and economical operation thanks to the quick-lift system; no more laborious cranking Crodpszk Nlnefx Aktji - Smooth-running, infinitely adjustable drilling unit - Height adjustment with fine tuning and a gas spring cylinder for weight compensation - Cross-travel and height adjustment with scales and adjustable stops - Vibration-free operation thanks to a robust steel construction - Drilling depth adjustable via a scale and stop - Drill head height adjustment can be fully utilized for vertical slotting - Large-dimensioned gray cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Swiveling drill head: -60° to 60° - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drilling table height: 830 mm - Dimensions: 1,200 × 1,050 × 1,300 mm - Weight: approx. 240 kg

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° with 2 eccentric clamps Crjdpfxozk Nupe Aktei with one-hand operation with dowel drilling device with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: at short notice Storage location: Flörsheim

Condition: used, incl. 7 chain sets Csdpfx Akjvvnmlstsri pneum. air suspension used, top condition, lots of accessories Wigo brand Stand machine Chain set 7 pieces Door support Workpiece support can be swiveled down - tilted for wedge-conical holes Suction connection D 60 mm Space requirement approx. 1100 mm x 700 mm x 2000 mm Weight approx. 350 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Condition: used, Year of construction: 1988, Slot drilling machine Csdjzuynuepfx Aktsri Manufacturer: SCM Type: AS 16 Year of manufacture: approx. 1988

Condition: used, Door lock milling machineused, good conditionmake Haffnertype SL 100machineNo. 2269upright machinechain setdoor supportworkpiece supportpusher hole motorforend motorlubricatorsuction connection D 80/100 mmspace requirement approx. 1200 mm x 700 mm x 2000 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Cedpfjvwfmfjx Akteri

Condition: used, functionality: fully functional, input voltage: 400 V, BÄUERLE horizontal boring machine, very solid construction, 3D table, on chassis, drill bit set included, 400V 16A connection with fuse. Crsdpfx Asyz U R Toktei

Condition: used, Door lock mortiserused, good conditionmanufactured by Haffnertype SL 100stand machinechain set 12 - 17 / 50 x 150 mmworkpiece resthandle hole motorface-plate motorlubricant unitmechanical workpiece clampingrequired space ca. l x w x h mm1500 x 900 x 2010located in  97447 Gerolzhofensale in current condition as seen- free on truck - Codovwfv Tjpfx Aktsri

Condition: good (used), Code: 0423 Brand: ME.SA - ITALY Csdpfx Aszgt Edektjri Model: GT 60 S - CE Standard Chain and locks mortising machine with bits and cutters for joinery, wooden joinery, doors, furniture and various – CE Standard Technical data: Max mortise length 250 mm Head transverse stroke mm 100 Head rotation +/- 45° Vertical stroke of upright bracket 250 mm Vertical rotation of upright bracket +/- 45° Max window/door frame height 1000 mm Chain motor 3 Hp Vertical spindle motor 2 Hp Min/max horizontal spindle centre distance 50/130 mm Overall dimensions mm 850 x 900 x 1900 h Weight kg 390

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: Credpfx Ajxxb Rrektei X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Code: 0485 Brand: MASTERWOOD Model: CV1- CE Standard Cjdjz Et Imspfx Aktsri Chain mortising machine for cutting mortises in wooden joinery, doors, furniture, shelves and other items – CE Standard Technical data: Sturdy cast iron frame Max mortise depth 180 mm – Effective depth 150 mm Max mortise length 280 mm Transverse stroke of cutting head 80 mm Vertical stroke of worktable 200 mm Motor 1,8 Hp Max workpiece height 900 mm Suction inlet diameter 120 mm Overall dimensions mm 1000 x 600 x 1750 h Weight kg 170

Condition: used, cleaned, function checked, test run with face-plate motor used manufactured by Festo type KF stand machine door rest base face-plate motor exhaust connection D 50 mm required space ca. l x w x h mm 1200 x 800 x 2000 weight ca. 200 kg total connected power 1 kW located in  97447 Gerolzhofen Cedpfx Akovwfr Uotori sale in current condition as seen - free on truck -

Condition: used, Camam Horizontal and vertical double mortising machine. 2 double horizontal spindles 3 vertical spindles right side Cjdswt S E Eepfx Aktsri 3 vertical spindles left side

Condition: used, Year of construction: 1973, Storage location: Nattheim Csdpfsvvkt Uox Aktsri

Condition: used, used manufactured by Haffner type KF20 wall machine Crodjvwf T Espfx Aktji workpiece rest lubricant unit total connected power 1,5 kW located in  97447 Gerolzhofen sale in current condition as seen. Without repair work. Pickup in the short term. - free on truck -

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Crjdpfxjv Hm Nms Aktji Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)