Horizontal slot mortising machine

KÖLLE L 2

Condition: used, Year of construction: 1996, input voltage: 400 V, empty load weight: 220 kg, WELL-MAINTAINED, USED KÖLLE L2 LONG-HOLE DRILLING MACHINE WITH A 1.4 KW MOTOR AVAILABLE FOR SALE! Fsdpfez Dbicex Al Uspn

Condition: used, Year of construction: 1992, with Centrofix cutterhead Machine cleaned, fully inspected Tables measured – adjusted very precisely, max deviation 0.05 mm Test planing carried out Used, good condition, low hours Manufacturer: Maka Type: AH 430 Year of manufacture: 1992 Machine no.: 9201531 GS wood dust tested Motor: 3.0 kW Control panel on top Planing width approx. 430 mm Infeed table length approx. 1500 mm Outfeed table length approx. 1200 mm Swing guard Slotted/low-noise table lips Fedpfx Alsxuv Rre Uopn Number of knives: 4 Centrofix cutterblock Table adjustment via handwheel automatic brake Extraction connection D 140 mm Space requirement approx. 2700 mm x 1200 mm x 1400 mm Weight approx. 800 kg Storage location: 97447 Gerolzhofen, loaded free of charge, unpackaged Handover in as-inspected condition, without any warranty or guarantee.

Condition: good (used), Slot Mortising Machine L2 - Year of manufacture: 1977 - Weight approx. 220 kg - Overall dimensions approx. 1,120 x 880 x 1,120 mm (W x D x H) - Table height approx. 980 mm - Table size approx. 820 x 350 mm - Power consumption 3.2 A / 3-phase power connection - Drilling depth approx. 150 mm - Drilling length approx. 200 mm - Max. drilling height approx. 120 mm - Drill chuck approx. 3–20 mm Fsdpjywnuwefx Al Ujpn

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality Fedpox Rpgbjfx Al Uepn After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 2 control Year of construction: 2022 Operating hours: 1.5 operating hours Fsdjhhiw Nepfx Al Uspn Technical data: Volume flow at 10 bar: 0.67 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 260 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), - Digital display Heidenhain - Accessories available Travel paths: X – path 280 mm Y – path 210 mm Cross table KS 255 D Spindle speeds 135 – 4,500 rpm Fsdpjv E D Ttsfx Al Uopn

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Fpedpfxov S Diuj Al Uon Machine width: 960 mm Weight: 250 kg

Condition: used, functionality: fully functional, – Austrian manufacture Fjdpfx Asw H Rrwsl Uspn – DTR (technical documentation) included – not repainted – compact design – occupies very little space TECHNICAL SPECIFICATIONS: – edge thickness: 0.4–2.0 mm – workpiece thickness: 10–50 mm – feed speed: 5.5 m/min – height to table surface: 880 mm – table dimensions: 1800 x 300 mm – workpiece support – total power: 2 kW – power supply: 400 V, 50 Hz – electronic glue temperature control: 20–250°C – compressed air pressure: 6 bar EQUIPMENT: – feed plate – tape feeder – guillotine for pre-cutting – glue applicator – 3 pressure rollers – guillotine for front/rear tape cutting – 2 milling units: top/bottom – dimensions (L/W/H): 2050/930/1280 mm – weight: 290 kg

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Fpedpfx Alswhuu Eo Usn

Condition: used, double-acting hand lever cylinder Storage location: Nattheim Fodjzkl T Iopfx Al Uopn