Used multi- spindle drilling machines for sale (84)

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction Crsdpsz Df Txofx Aktsi - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, functionality: fully functional, Maggi Boring 23 multi-spindle drilling machine Cedps Ah S D Isfx Aktsri Spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last drill: 704 mm Max. drilling depth: 55 mm Number of pneumatic clamps: 4 Max. height of clamps above the table: 70 mm Working pressure: 6 – 8 bar Air consumption: 10 l/cycle Motor speed: 2800 rpm Total power: 1.5 kW Noise level: 76.1 dB

Condition: excellent (used), functionality: fully functional, 21 spindles spindles right/left table dimensions 840x440mm 2 pneumatic clamps spindles span 32mm pedal control Cjdszz N Tmjpfx Aktjri pneumatic setting vertical/horizontal

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Cedpfx Akezyr Epjtjri

Condition: excellent (used), CATALOGUE NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2 x 20 pcs - Number of vertical spindles: 1 x 20 pcs - Distance between extreme spindles: 610 mm - Distance between spindles: 32 mm - Stroke of the feed cylinder: 60 mm - Max. length of the workpiece: 3400 mm - Adjustment of horizontal spindles: up/down, front/back - Adjustment of vertical spindles: left/right - Ability to operate on each drilling machine separately - Right-hand/left-hand drills, mounted with threads (screwed in) - 3 pneumatic clamps - Motor power: 4 x 1.85 kW Crsdpozr U Dljfx Aktoi - Air consumption: 6-8 bar - Dimensions (L/W/H): 4600 x 1180 x 2200 mm - Weight: approximately 1500 kg Net price: 12,900 PLN Net price: 3,000 EUR, depending on the exchange rate (4.3 EUR) (Prices may vary with larger exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual Cjdpfxjzuhb As Aktjri • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient • Certification: CE Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Condition: excellent (used), functionality: fully functional, 23 spindles Codjzz N S Nepfx Akteri left/right spindles 3 pneumatic clamps spindles span 32mm pedal control CE

Condition: used, Technical specifications: Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Crsdpfx Akozvmvhjtsi Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Height: 1330 mm

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Point to point Through-feed CNC boring machine HIRZT MERIS K2, Year 2010 - Working width up to 870mm - Working length, no limit - Working thickness up to 40mm - Configuration: 14 + 4 + 2 pcs. drilling units + routing unit 5 sides drilling - Automatic panel positioning Csdpfsz Ag E Nsx Aktsri - Automatic unloading system to return the panel to the operator or move forwards as a through-feed machine. Machine ready for loading M: 0030 6934 522 577 Sotiropoulos Nick

Condition: used, Used, 3-spindle vertical multiple drilling machine with Morelli motor, with certificate of conformity. Codo Ahgqvepfx Aktori

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,600 kg, pressure: 7 bar, Masterwood Speedy TF 2.0 Machine in very good condition Maximum working width: 1000 mm Maximum working length: unlimited Fully equipped Drilling head Cedpfx Asz A Traskteri Saw blade Tool changer Router ISO30 Masterwork CAD-CAM system Tables with adjustable inclination, front and rear Available from the end of November 2026 Price upon request

Condition: new, Year of construction: 2026, functionality: fully functional, /// DESCRIPTION Multi-functional CNC drilling machine is able to drill from 6 sides. Independent top grooving, 5.5kw main spindle of 4-slot tool changing magzine, and 1 drilling block on top, one drilling block and one main spindle on bottom meet different process requests and gives batch-size-one production max flexibility; Software is open port, support most formats in market. Compact design, save space /// TECHINICAL SPECS Total power - 21.07 KW Machine dimensions - 3962× 3010× 2320mm Power supply - 380 V/50 Hz Air supply 0.6-0.7 MPa SYNTEC control system Panel size Length 200-2,800 mm Width 30-1,220 mm Thickness 10-60 mm Maximum travel speed X-axis/U-axis - 135 m/min Y axis - 75 m/min Z axis - 30 m/min V axis (push) - 30 m/min Drilling blocks Top 1; Bottom 1 Number of vertical drills (top) 1 Number of horizontal holes (top) X: 2*2+ Y: 2*2 Number of vertical drills (lower) 9 Maximum drill diameter Φ35 mm Distance between holes 3 Rotation speed 5000 rpm Shaft diameter Φ10 mm Crodpfx Akoyi Avfjtei Drill length 7 Main shaft Upper - 1*5.5 kW ER32 ATC4 18000 rpm Lower - 1*3.5 kW er25 18000 rpm Saw blade Power 1.7 kW Dimensions Ф 100* Ф 22* δ 4Center distance 6500 mm Conveying capacity approx. 0.2 t/hour Conveying speed approx. 0.5 m/sec Width of belt 500 mm Motor power 1.5 kW Operation voltage 400 V Frequency 50 Hz

Condition: good (used), Year of construction: 2015, I sell the multiple boring machine Detel M-21, year 2015. Available immediately. Credpfxjtmwnis Aktji

Year of construction: 2004, condition: good (used), I sell the multiple boring machine SCM TOP 35, Year 2004. Number of spindles 35 Offset 32mm 6 positions for pre-set drilling depths 2 Aluminium fences 2 x 1500mm 4 stoppers for Aluminium fences 4 material pressures pneumatic 2 electromotors 2 x 2,2KW Tilting 0-90° full servomotorical Two-step drilling with pneumatic active piston / max. Drilling depth140mm ! Max. Element width over the drilling head 1280mm. Total weight 693kg. Very good condition. Available immediately. Crsdpfxjiu Urpe Aktei

Condition: used, Multi-spindle drilling machine Maggi BS 35 2/26. Crsdpfx Akozkh Rcetji

Condition: excellent (used), functionality: fully functional, 29 spindles Csdpezz N S Aofx Aktori left/right spindles spindles span 32mm horizontal or vertical drilling setting of depth of drilling pneumtatic movement of drilling head

Condition: new, Year of construction: 2026, functionality: fully functional, Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for simultaneous processing of two panels and doubling productivity. This machine is designed for furniture manufacturers seeking speed, precision, and reliability within a compact footprint. Key Features - 2 independent workstations (1200 + 650 mm), each with a dedicated computer and processing units. - Optimized drilling blocks: up to 19 vertical drills + horizontal drills on the X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air-cushion tables for scratch-free panel handling. - Automatic dimension detector with alarm and panel compensation feature. - Servo-driven clamps and automatic side alignment system for maximum accuracy. - Advanced software + SYNTEC CNC control with user-friendly interface, supporting MPR, DXF, BPP, PDX, and XML file formats. - Barcode scanner for integration into automated production workflows. - Enhanced safety: side sensors, emergency stop, cable protection. Technical Specifications - Panel dimensions: Length 200–3000 mm / Width 30–650 mm / Thickness 10–60 mm - Max. traverse speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW - Weight: 6,300 kg - Machine dimensions: 6,620 × 4,620 × 2,378 mm - Power supply: 380V / 50Hz / 3 phase Codpfx Akjxcwmqeteri Application Areas - Medium and large-scale furniture manufacturing - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single setup User Benefits - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Smart line integration: barcode scanner, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling solutions

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 610203Z, overall weight: 295 kg, Vitap ALFA 21 Classic Multi-Spindle Boring Machine – 2016 Vitap ALFA 21 Classic semi-automatic multi-spindle boring machine manufactured in Italy. The machine is designed for precision line boring operations in furniture and cabinet production according to the 32 mm system. Suitable for vertical, horizontal, and angled drilling in chipboard, MDF, and solid wood components. The machine is in very good condition, fully functional, and ready for immediate operation. Features: Manufacturer: Vitap Model: ALFA 21 Classic Year: 2016 21 spindles 32 mm spindle spacing Pneumatic tilting boring head (0°–90°) Vertical and horizontal boring Foot pedal control Pneumatic material clamps Quick-change drill chucks Precision fences and stops Csdpfx Asy Uwryoktori Heavy-duty industrial construction Technical data: Number of spindles: 21 Distance between first and last spindle: 640 mm Spindle speed: 2800 rpm Max. drilling depth: 70–80 mm Max. tool diameter: Ø35 mm Table size: approx. 864 × 500 mm Motor power: 1.5 kW Power supply: 400V / 3 phase / 50 Hz Required air pressure: 6–8 bar Machine weight: approx. 295 kg The machine can be inspected and tested while powered on.

Condition: new, CATALOG NUMBER M0261 TECHNICAL DATA Number of spindles: 21 Distance between the first and last drill: 640 mm Distance between the centers of individual spindles: 32 mm Maximum size of the workpiece: 50 x 915 x 3000 mm Maximum drilling depth: 65 mm Number of pneumatic clamps: 2 Height of the drilling machine worktable: 860 mm Maximum height of clamps above the table: 70 mm Operating pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Revolutions: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pneumatically adjustable head tilt angle - Cast iron fences - Spindles adapted for quick-release couplings - Patented pneumatic material clamps - Cast iron worktable - Quick and precise adjustment Crjdpfozw Dwrsx Aktji - Precise drilling - Italian production Standard machine equipment: - 2 aluminum rulers with a length of 1.5 m (right and left) with two stops - 5 quick-release couplings - Wooden crate to protect the machine during transport. ADVANTAGES - Drilling in vertical/horizontal/angled positions - Multi-spindle - New machine - CE certificate - Robust - Professional Net price: 13,800 PLN Net price: 3,200 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (Price may change in case of significant exchange rate fluctuations) - We ship machines to every corner of the country - Possibility of trade-in for another machine. The prices quoted are net prices. Net price quoted for international transactions, EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine Crjdpfx Akofriztjtoi model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers weight 865 kg L x W X H 280cm × 150cm × 150cm

Condition: used, 4-spindle adjustable vertical drilling machine, Camam brand Crjdezz Rpvopfx Aktji + 3 spindles to be revised

Condition: new, CATALOGUE NUMBER M0252 PRODUCT FEATURES Main machine features: - Single-head drilling machine for drilling in the range of 0 - 90° - Pneumatically adjustable head tilt angle - Side guides can be set with an accuracy of up to 0.1 mm - Securing clamps allow for quick panel positioning without adjustment - Spindles adapted for quick-release couplings - Patented pneumatic material clamping system - Work table made of MDF - Quick and precise adjustment - Precise drilling - Made in Italy Standard machine equipment: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stops - 5 quick-release couplings - Wooden crate for protecting the machine during transport ADVANTAGES - Vertical/horizontal/angled drilling - Multi-spindle - New machine - CE certified - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill: 704 mm - Distance between the centers of individual spindles: 32 mm - Maximum workpiece size: 950x3000 mm - Maximum workpiece thickness: 60 mm - Maximum drilling depth: 65 mm - Number of pneumatic clamps: 2 - Operating pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW Csdpfx Aezr I Hysktjri - Noise level: 76.1 dB - Speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19500 PLN Net price: 4640 EUR Net price calculated based on the exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2018, functionality: fully functional, number of spindles: 35, SECOND-HAND MULTISPINDLE DRILL WITH 35 SPINDLES MAGGI BORING SYSTEM 35 YEAR 2018 - Center distance 32 mm. Csdox Rcqgopfx Aktsri

Year of construction: 1994, condition: excellent (used), I sell the back side multiple boring machine Detel M1-9, year 1994. Crsdpfxok Iy Hbs Aktoi 9-spindle x 32mm. Motor 1,1kW Very good condition. Available immediately.

Year of construction: 2007, condition: excellent (used), I sell the top multiple boring machine Detel M-13, year 2007. 3-spindle. Motor Perske 2,0kW Credjhua Rpjpfx Aktji Very good condition. Available immediately.