Used Index Multi Spindle Machines for sale (160)

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles Rbjdpfx Abot Rkzwo Uew 52mm Capacity Equipped as pictured Under power Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 Rbedpfx Aboxnrtco Usw (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: used, Year of construction: 2000, INDEX MS42C Maximum bar diameter: 42 mm Spindle pitch circle diameter: 320 mm Main spindle: Power clamping with INDEX spring-loaded hollow clamping cylinder and collet Maximum clamping stroke: 4 mm Rodpoymc S Usfx Ab Usbw Clamping force: 26 kN Main spindle drive: Rated power: 5 kW Rated speed: 1,500 rpm Rated torque: 32 Nm Maximum speed: 5,000 rpm Synchronous spindle and rotary tool holder: Rated power: 5.3 kW Rated speed: 1,500 rpm Rated torque: 34 Nm Maximum speed: 5,000 rpm Cross slides: Max. number: 10 Travel (X): 70 mm Travel (Z): 140 mm Max. feed force +X: 11.4 kN Max. feed force −X: 7.9 kN Max. feed force +Z: 11.4 kN Max. feed force −Z: 7.9 kN Rapid traverse: 15 m/min Longitudinal spindles: Quantity: 6 Stroke (Z): 240 mm Max. feed force +Z: 15.1 kN Max. feed force −Z: 11.6 kN Rapid traverse: 15 m/min Longitudinal slide units: Max. number: 6 Travel (X): 70 mm Max. feed force +X: 11.4 kN Max. feed force −X: 7.9 kN Rapid traverse: 15 m/min Synchronous spindle: Chuck system: spring-loaded clamping cylinder Maximum clamping diameter: 42 mm Chuck outside diameter: 112 mm Jaw stroke: 1 mm Max. total clamping force: 13 kN Weight: approx. 11,000 kg Scope of delivery: KNOLL KTS 32-48-T hydraulic unit CUCCHI PLURIMANDRINO bar feeder, year 2000 Workshop cabinet with machine accessories KNOLL VRF 500 KNOLL 400 S-1/250 chip conveyor

Condition: used, Year of construction: 1994, operating hours: 62,283 h, bar diameter (max.): 26 mm, spindle bore: 230 mm, total width: 1,500 mm, total length: 7,000 mm, total height: 2,000 mm, INDEX MS 25E Maximum bar diameter round / square: 26 / 18 mm Spindle circle diameter: 230 mm Max. bar length: 100 mm Longitudinal slide travel (total / working / adjustment): 85 / 50 / 330 mm Cross slide travel (total / working / adjustment): 36 / 16 / 20 mm Spindle speeds (12 / 24 steps with 1.25 / 1.12): 366 – 5,020 rpm Main drive: 15 kW / 1,450 rpm Voltage: 400 V / 50 Hz Operating hours: 62,283 h Working hours: 4,916 h Rbedpfeymdchjx Ab Uew Dimensions (incl. bar guide): approx. L x W x H 7 x 1.5 x 2 m Weight: approx. 6 t Scope of delivery: INDEX MS 25E machine

Condition: used, Year of construction: 2007, operating hours: 26,721 h, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, total width: 1,800 mm, total length: 3,200 mm, total height: 2,850 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 12 mm, travel distance Z-axis: 85 mm, rotational speed (min.): 10,000 rpm, overall weight: 6,500 kg, INDEX MS 22C Work Spindles: Quantity: 6 Maximum bar diameter: 22 mm Spindle pitch circle diameter: 230 mm X / Z travel: 62 / 85 mm Rapid traverse: 15 m/min Synchronous hollow spindle drives: Quantity: 6 Maximum speed: 10,000 rpm Nominal speed: 8,300 rpm Power: 15 kW at 18 Nm Chuck diameter: 110 mm Rotating synchronous spindles: Quantity: 2 Z stroke: 120 mm Feed force: 2.5 kN Rapid traverse: 15 m/min Rotational angle: 132° Counter spindle: Maximum speed: 10,000 rpm Nominal speed: 8,000 rpm Power: 9.2 / 12 / 14 kW at 11 Nm Tool carriers: Maximum quantity: 11 X / Y / Z travel: 62 / ±12 / 85 mm CNC control: C 200-4D (Siemens Sinumerik 840D) Dimensions (approx. L x W x H): 3.2 x 1.8 x 2.85 m Rsdpfx Absymaw Ij Uebw Weight: approx. 6.5 t Operating hours: 61,997 h Machining hours: 42,235 h Scope of supply: INDEX bar feeder Bar feeder IEMCA SIR MS22 P, year 2008 Coolant unit with belt filter Chip conveyor KNOLL 400 S-1/290 Coolant filtration unit KNOLL FKA/1780 RSF 100 Workshop cabinet with machine accessories

Condition: excellent (used), Year of construction: 2019, operating hours: 16,917 h, functionality: fully functional, machine/vehicle number: 11010081, bar diameter (max.): 22 mm, turning diameter: 22 mm, bar length: 3,000 mm, Equipment: documentation/manual, Year of manufacture: 2019 Operating hours: 16,917 h Control unit: C200 Solution Line, control panel with flat-screen monitor (47 cm diagonal) Maximum: 10 channels / 31 axes Based on SINUMERIK 840D sl Equipment: NC option synchronous spindle / polygon turning incl. electronic shaft Slide unit 1.1 (X-axis and Z-axis CNC-controlled) Slide unit 2.2 (X-axis and Z-axis CNC-controlled) Slide unit 3.1 (X-axis and Z-axis CNC-controlled) Slide unit 4.2 (X-axis and Z-axis CNC-controlled) Slide unit 5.1 (X-axis and Z-axis CNC-controlled) Slide unit 6.1 (Z-axis CNC-controlled) – synchronisation module Slide unit 6.2 (X-axis and Z-axis CNC-controlled) – back-working unit at position 6.2 Main spindle max. clamping diameter 22 mm Parts discharge via chute from spindle position 6 to the right Conveyor belt outside the machine including coolant return Bar feeder: IEMCA SIR MS22, integrated loading magazine Flat loader, 50 Hz Rsdpfx Ajyxnnaeb Usbw D9-13-19-26 Bar length 3300 mm Material storage 200 mm support surface Additional storage chain for 20 bars Profibus-DP slave interface Cooling unit: Cooling capacity 29 kW at 38°C room temperature Coolant R407c Chip conveyor: Hinged belt chip conveyor, 570 mm discharge height, left discharge, with lift pump for filtration system Chip trolley, fill volume 100 l Fire extinguishing unit: CO2 fire extinguishing system with optical fire detection, CO2 extinguishing tank with control unit Prepared for connection to a central oil mist extraction system Shut-off damper for central oil mist extraction system Electrics: Teleservice via VPN connection Chip breaking cycle "ChipMaster" Transport, dismantling, and collection are to be organized by the buyer.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 080005, • Turning diameter over slide: 1920 mm • Axis height: 1300 mm • Center distance: 2000 to 30000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear ratios: 4 Rbjdjwab Rdspfx Ab Uew • Spindle end: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (can be extended up to 610 mm) • Turret type: servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30000 mm • X-axis ball screw: 63 mm x P10 • Ball screw in Z axis: 63 mm x P10 (over 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (possible up to 360 mm) • Tailstock quill extension: 250 mm (possible up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Condition: used, Year of construction: 2003, INDEX MS32G Overhauled completely: 2020 Original mfd. 2003 6 Spindles 32mm Capacity Siemens 840D control Equipped as pictured Kraft & Bauer fire extinguishing system All spindles on the machine were overhauled 2 years ago incl. clamping cylinder except for one on the GSP. - GSP is equipped with Hainbuch Spanntop and used Röhm jaw chucks - No tools are included - No FZ tubes / no bar pusher Rodow A S H Uspfx Ab Uobw - Last year, spindle encoders on the HSP incl. GSP were completely renewed. Equipped with Lenord & Bauer IEMCA SIR-MS32/33/P See attached specifications.

Condition: excellent (used), Year of construction: 2021, INDEX MS22-8 Mfd. 2021 (Commissioned 2022) Double NCU (2) Synchrons MBL Bar Feed 3.3 Meters Estimated Hours: 10,000 Rsdewt Unvepfx Ab Ujbw Contact us for full specifications

Condition: good (used), functionality: fully functional, A lot of parts for Index K-16 machine Rodpfx Aex Ty Uuob Ujbw collets, curves, tool holders, shafts, gears, slides, distance rings, end switches, etc. See attached photos.

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Rsdpferqzzpjx Ab Usbw Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Magazine: IEMCA 3300 mm capacity bar feeder

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, INDEX MS40-6 CNC Multi-Spindle Year of Manufacture: 2011 Commissioned: 2012 Control: Siemens 840D (Dual NCU) Bar Capacity: 40 mm Slide Units Position 1.1: X / Z NC controlled Position 1.2: X / Z NC controlled Position 2.1: X / Z NC controlled Position 2.2: X / Z NC controlled Position 3.1: X / Y / Z NC controlled (Y ± 21 mm) Position 3.2: X / Z NC controlled Position 4.1: X / Z NC controlled Position 4.2: X / Z NC controlled Position 5.1: X / Z NC controlled Position 5.2: X / Z NC controlled Position 6.1: X / Z NC controlled Rbjdpfxoxndgzo Ab Usw Position 6.2: X / Z NC controlled Position 6.3: X NC controlled, Z fixed Bar Feed IEMCA SIR MS40/33/P magazine bar loader Workpiece Handling Parts chute at spindle position 6 Workpiece conveyor at spindle position 6 Synchronization unit at spindle position 6.1 Parts ejector Coolant feed preparation through counter spindle Back-Working Attachment at slide position 6.2 Up to 3 fixed toolholders Auxiliary Drive Preparation Electrical preparation for 2 auxiliary drives with electronic shaft (positions 1–3), synchronous with main and counter spindle Electrical preparation for 2 auxiliary drives with electronic shaft (positions 4–6), synchronous with main and counter spindle Compatible with auxiliary drives with incremental encoder (double module) Chip & Coolant System Hinge-belt chip conveyor (cross type), discharge height 1200 mm, front discharge with lift pump for filter unit Coolant filtration unit (50 Hz): Coolant tank: 800 L Vacuum rotation filter: 650 L capacity Plate heat exchanger for coolant cooling Heat exchanger pump: 80 L/min 7 bar Low-pressure pump: 300 L/min 4 bar High-pressure pump: 55 L/min 40 bar Safety & Environmental Automatic CO₂ fire extinguishing system with optical/thermal detection Preparation for central exhaust system Shut-off flap for central oil mist extraction Control Options & NC Functions 16/16 freely programmable I/O interface Transmit / Tracyl function (milling cylindrical paths on OD and face) Dual transmit function for Y-axis transformation NC option: counter spindle / polygon turning with electronic shaft Process Monitoring Integrated ARTIS monitoring system based on torque, current, or power evaluation Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 1–3 Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 4–6

Condition: good (used), Year of construction: 2006, Year of manufacture: 1998 to 2006 Rjdpfx Abjypltgs Usbw Available from current location

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material Redpexc Idmofx Ab Ujbw ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. *

Year of construction: 1992, condition: ready for operation (used), Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible. Rbjdpfox Tum Sox Ab Uew

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW Rbjdpfx Asvh Naqeb Ujw - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement. Rsdpfx Absqhkukj Usbw

Condition: excellent (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, bar diameter (max.): 22 mm, INDEX MS22-8 Mfd. 2019 2 NCU 2 Syncrons 2 Y-Axis Control: Siemens Solution Line Knoll System Bar Feed: IEMCA SIR rack loader (12-ft) 22,000 on-hours 10,000-15,000 Hours Rodpfx Abox H H Nre Uebw

Condition: used, Year of construction: 2009, Technical details: turning diameter: 270 -300 mm turning length: 710 mm Rbsdpfxow Dud Ej Ab Usw total power requirement: 43 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools – the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one. *

Condition: used, Year of construction: 2008, Out of valve production * Redpfxsynkgvj Ab Uobw

Condition: defective spare-parts repository (used), Year of construction: 2005, functionality: not functional, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 360 mm, controller model: Siemens 840 D PowerLine, TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X- / Y- / Z-axis): 25 / 12 / 50 m/min Main spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm X-axis travel: 150 mm Y-axis travel: 600 mm Spindle bearing diameter: 110 mm Turret Number: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool stations: 3 x 12 Number of driven tool stations: 3 x 12 Max. speed of driven tools: 6,000 rpm Drive power driven tools: 8 kW Max. torque: 16 Nm MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t Rjdpfoyxgc Nex Ab Ujbw EQUIPMENT 2(3) Y-axes +/-35 mm 2 B-compensation axes (+/-1°) Chip conveyor Parts catcher Tool breakage control Bar feeder: IRCO Profimat 65.6

Condition: used, Technical details: turning diameter: 626 mm turning length: 3000 mm Turning diameter: 600 mm spindle bore: 100 mm spindle turning speed range: 2800 U/min weight of the machine ca.: 18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device Rbodpfx Aevgmimsb Ujw *

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Spindle 2 Chuck SMW HFKN 165-46 mm Rbodpfx Aoyxpadsb Uow Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

Condition: good (used), Machine come with equipement from pictures. Parts shown by hand not come. Rbedpfevx Tikex Ab Uew

Condition: used, Year of construction: 2014, operating hours: 18,384 h, INDEX ABC 65 Distance between main and sub-spindle: approx. 250 mm Main spindle: - Bore: 65 mm - Max. speed: 6,000 rpm - Power: 25 / 35 kW at 80 / 120 Nm - Chuck diameter: 160 mm - Bearing ISO 702/1 diameter: 140 mm - C-axis Upper turret: - 10 stations - Maximum speed: 12,000 rpm - Power: 7.5 kW at 11.25 Nm - Travels X / Y / Z: 140 / ±50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Lower turret: - 9 stations - Maximum speed: 12,000 rpm - Power: 9 kW at 10 Nm - Travels X / Y / Z: 140 / ±50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Sub-spindle: - Bore: 52 mm - Max. speed: 6,000 rpm - Power: 5 / 9 kW at 10.5 / 20 Nm - Chuck diameter: 110 mm - Traverse X / Y: 140 / 300 mm Backworking units: - 8 units including 5 driven stations - Maximum speed: 12,000 rpm Rbsdpjymblaofx Ab Uew - Power: 6.4 kW at 7 Nm Workpiece and cut handling unit with gripper: - Stroke X: approx. 1,580 mm - Speed: approx. 68 m/min - Rotation angle: approx. 33° - Max. diameter: 65 mm - Max. weight: 2 kg CNC control: INDEX C 200-4D (based on Siemens Sinumerik 840 D-sl) Dimensions: approx. 4.1 x 2.1 m Required space including bar loader and coolant/filter unit: approx. L x W x H 11 x 1.5 x 2 m Weight: approx. 7 t Voltage: 400 V / 50 Hz Operating hours: 18,384 h Hydraulic hours: 16,694 h Scope of delivery: - Bar loader INDEX MBL - Coolant filter unit KNOLL KF 150 - Chip conveyor KNOLL 320 S-1/160 - Additional cooling unit KLH SC 8.K2L. MT-00-IND