Used Multi Spindel for sale (5,729)

Condition: ready for operation (used), Mechanical spindle press / four-column press Bwodpfx Akszta Tusneu - Four-column press - Pressing force approx. 40 tons Dimensions: L x W x H 1.5 x 1.5 x 2.0 meters / Weight 1000 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 Bsdpfez Ata Hsx Aknowu B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. Bwsdpoq Nd Rbsfx Aknsu When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: not inspected (used), Year of construction: 2005, Brand: INDEX Type: G300 Year of build: 2005 Serial number: 500569 Chip conveyor: true CNC control, brand, type: Sinimerik 840C Engine power (kW): 35 kW Electric connection: 400 V Dimension l: 5200 mm Dimension w: 3300 mm Bodez Ii Riepfx Aknswu Dimension h: 2600 mm Terms of delivery: Ex foundation-unpackaged Additional information: Incl. DSL - AES-GAMMA 30 - Extraction, Mixed Lot Tool Holder

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: 606411, cutting range flat at 90° (X-axis): 600 mm, cutting range flat at 90° (Y-axis): 15 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 90°: 55 mm, cutting range angle steel at 45° (X-axis): 80 mm, cutting range angle steel at 45° (Y-axis): 10 mm, cutting range angle steel at 90° (X-axis): 150 mm, cutting range angle steel at 90° (Y-axis): 18 mm, sheet thickness (max.): 13 mm, Equipment: foot remote control, We offer this used Kingsland Multi 125 shearing machine for profiled steel, manufactured in 2011. Year of manufacture: 2011 Punching – dimensions: 35 × 25; 57 × 16; 30 × 20; 38 × 15 mm Bending capacity for flat bar: 250 × 22 mm Shearing of flat bar: 380 × 25; 600 × 15 mm Shearing of angle profile at 90°: 150 × 18 mm Shearing of angle profile at 45°: 80 × 10 mm Cutting of round bar: up to Ø 55 mm Cutting of square bar: 50 × 50 mm Bwjdez D Tf Aspfx Akneu Cutting with extra blades: up to 200 mm Notching – rectangular: 60; 100 mm Notching with additional tools: 80; 90 mm Maximum material thickness: 13 mm If you have any further questions or require more information, please send us a message or call us.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84kW Multi-blade saw Dimensions Length 3440 mm Width 1900 mm Height 1700 mm Cutting parameters Maximum diameter of the log to be sawn 450 mm Diameter of the circular saw 630 mm Bsdpfxez H T Ayj Aknswu Minimum width of the center stack 60 mm Maximum number of saws per spindle 4 pieces 2 spindles, one on top and one on the bottom Motors Power of the motor for the lower drive 52 kW Power of the motor for the upper drive 41 kW Spindle speed 1480 rpm Infinitely variable feed rate 0–15 m/min (0–25*) Power of the motor for the feed drive 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t Bjdpfx Aszrpt Usknowu dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment chain width 230 mm motor 22 kW max. cutting height without pressure comb in fixed position: 130 mm max. cutting height without pressure comb with movable blade: 95 mm Bjdpfszv Uyuox Aknswu with pressure comb: 15 mm less cutting height still in good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 41015, Technical Characteristics: Work Area • Chuck diameter: 210 mm • Maximum workpiece diameter/height: 200/200 mm • X1/X2 axis stroke (working stroke): 160 mm / Rapid traverse in X: 24 m/min • Z1/Z2 axis stroke: 250 mm / Rapid traverse in Z: 30 m/min Main Spindle • Spindle configuration: 4 spindles (twin machining + twin loading) / A2-6 size • Distance between spindles: 282.5 mm • Maximum speed: 4500 rpm • Power: 18.5 kW Bsdpfxjxwmcwo Aknowu Turret with Driven Tools • Turret configuration: 2 turrets • Number of positions: 2 x 10 • Maximum speed: 4000 rpm / Power: 3.7 kW Electrical Equipment • Operating voltage: 400 - 480 V, 120 A • Connected load: 66 kVA Dimensions • Total dimensions: Length = 3336 mm (with chip conveyor), Width = 2400 mm, Height = 1760 mm • Weight: 7000 kg Main Features and Capabilities: • CNC Control: FANUC 0i-TF Plus • Main spindle: High power and wide speed range • Driven tools: Capability for milling and drilling operations • Chip conveyor • Fully enclosed work area • Chip extractor • Cooling system for electrical panel • Lubrication system • Hydraulic oil cooling unit • Automation interface for robot integration installed • Documentation: Available in electronic and printed formats Machine Condition: • Status: Operational

Condition: used, functionality: fully functional, Simatic Multi Panel Touch Siemens Siemens MP 277 10-inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: Used Price per unit External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Bwedpswg Tmdsfx Aknsu Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Catalog number: 7405 TECHNICAL DATA - Max cutting height: 150mm - Max element width: 700mm - Working width of the saw arbor: 530mm - Max saw blade diameter: 450mm (installed: 350mm) 350mm - Arbor bore diameter: 90mm From above: - Ratchets - 2 toothed draw shafts From below: - 2 smooth draw shafts - Saw arbor - Smooth draw shaft - 4 feed speed settings - Feed motor: approx. 2kW - Main motor: 30kW - Machine dimensions (L/W/H): 2400x1700x1900mm - Weight: approx. 3000kg - Polish made - Used machine, very good condition Bwjdpozulwzsfx Aknsu Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to facilitate product identification. We only resell products that have already been introduced to the market by the manufacturer. We have no business relationships with the manufacturer.

Condition: used, Year of construction: 2012, Dough divider and rounder König Mini Rex Multi Year of manufacture: 2012 Condition: cleaned & inspected, maintenance performed Roller hopper with a dough capacity of up to approx. 15 kg Removable components for easier cleaning Simple control via microcontroller on a touch panel Different weight ranges can be achieved by easily and safely replacing the weighing drum segments Single to four-row operation Maximum hourly output of 1200 – 4800 pieces per hour Extremely wide weight range: 8 – 330 g (different punch sizes required) Includes punch size SK58, weight range: 30-80g, 2-row Bodpjz A Sh Tjfx Aknowu Includes punch size AKG75, weight range: 85-140g, 2-row

Condition: used, Vitap Classic Multi-Spindle Drilling Machine, 21 spindles, left/right-hand spindles, Bsdpez Hxi Esfx Aknjwu quick-release mounting, spindle spacing 32 mm, drilling in vertical or horizontal position, 2 pneumatic clamps, power supply 380V, 1.8 kW motor, Machine ready for operation.

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Spindle diameter: 50 mm Bushing diameter: 70 mm Bushing equipped with spacer rings Bodpfxjz Enhzo Aknjwu Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more Bwsdpfjzx Ennox Akneu The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked. Bwedpfxszwh Rco Aknju

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED Bjdpjz Atvusfx Aknjwu 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame Bwedpfx Aoz Df Txoknou construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, Year of construction: 2004, Tornos MultiDeco 20/8 Number of spindles: 8 Maximum bar diameter: 20 mm Spindle speed: 5000 rpm Main spindle power: 15 kW / 18.5 kW Maximum part length: 100 mm without backworking; 75 - 80 mm with backworking Bodpfx Akozy Spuonswu Number of backworking spindles: 1 Backworking spindle axial travel: 160 mm Backworking spindle motor power: 1.1 kW CNC control unit: Fanuc Programming system: TB-DECO software platform IEMCA integrated automatic bar feeder High-pressure coolant pump and fine filtration system Automatic chip conveyor The machine is in working condition and can be inspected upon request.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For sale: a professional, automatic multi-blade saw, WEINIG RAIMANN VarioRip 310, designed for precise and efficient longitudinal cutting of solid wood. The machine was ordered in 2021 from WEINIG Vertrieb und Service GmbH & Co. KG. It is an industrial-grade machine from the renowned WEINIG / RAIMANN brand, designed for intensive production use. Machine number: 2108.20. Key parameters: Bwsdpfx Aez Eghmeknsu Main motor: 30 kW / 40 HP Saw arbur diameter: Ø 65 mm Arbor speed: 4200 rpm Blade diameter: 300–350 mm Continuously adjustable feed rate: 5–35 m/min Width of the conveyor chain: 340 mm Max. total infeed width: 650 mm Min. cutting height: 15 mm Power supply: 400 V / 50 Hz 3.5" color touchscreen CE compliant The machine is equipped with a hydraulic Quickfix rapid blade clamping system and 4 Quickfix collars for mounting 4 blades. Additional equipment includes a laser pointer indicating the cutting position, facilitating accurate material alignment. Precise material transport The VarioRip 310 features a robust, prismatically guided conveyor chain with a width of 340 mm. The system ensures accurate material guidance and high stability during cutting. The machine has automatic chain lubrication and oil level control. The chain is equipped with steel spike elements, which improve the guidance of warped, distorted, and short pieces of wood. Safety and equipment The machine has the RAIMANN SafetyPlus system, anti-kickback and anti-splinter guards, a Kevlar curtain, a locking guard, and emergency stop switches. The control panel displays, among other things, the machine load, power consumption, operating hours, and error messages. Dimensions: approx. 1700 × 1800 × 1500 mm Weight: approx. 1900 kg Working height: 850 mm The machine is ideal for companies involved in the serial cutting of wood, the production of moldings, furniture components, joinery, and other solid wood components. Price: 48,000 EUR net

Condition: used, Year of construction: 2021, functionality: fully functional, power: 90 kW (122.37 HP), cutting height (max.): 165 mm, cutting width (max.): 1,350 mm, BOARD EDGER AND MULTI RIP SAW VR 1300 S with servo controlled blade positioning • Production year: 2021 • Main motor: 90 kW • Max. board width: 1350 mm Bjdpfx Aksz D S Ddenowu • Max. cutting height: 165 mm • Servo-controlled fast blade positioning • 4 movable saw units with lasers • 3 fixed laser guides • 10" touchscreen control with MEBOR software • Additional 500 mm multi rip saw head with spacers Machine is sold with infeed conveyor. Outfeed conveyor is not included.

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Bwjdpfx Aksvbcydjnou Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Bedpfx Akjzxxmkjnjwu Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - track width: 360mm - roller width: 350mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table dimensions: 2040x1220mm From above: - pawls - toothed feed roller - pawls - saw mandrel - sliding, pressure roller From below: - rollers in front of the table, 2 pcs - guide - pawls - track - central track lubrication - electric saw mandrel lifting - electric body lifting - stepless feed speed adjustment - extraction nozzle diameter: 140mm, 160mm Bwodpfxjzulzmo Aknou - main motor: 30kW - overall dimensions (L/W/H): 2600x2300x1850mm - weight: approximately 4000kg ADVANTAGES - Czech production - used multi-blade saw - very good condition Net price: 30900 PLN Net price: 7186 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Bwjdpfxezyr Epj Aknou