Used Mortise Machine for sale (65,148)

Condition: good (used), functionality: fully functional, Year of construction: 1970, overall weight: 2,500 kg, broaching length: 300 mm, total length: 2,000 mm, total width: 2,000 mm, GSP M743 mortising machine Travel: 0 to 300 Prodpfx Adjz Ingve Roc Stroke: 3 to 52 Weight: 2.5 tons Rapid traverses on both axes Rapid traverse on table rotation, diameter 700 In very good condition

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Prjdo Aa A Eqjpfx Ad Rec Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. The stated selling price is the net price plus VAT. Psdpfx Adsz Efwyo Rjrc An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Prsdpfx Adjzy I Tco Roc

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine Prodoyuty Sjpfx Ad Roc used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2023, Used Machine Year of Manufacture: 2023 Condition: Like new; only a few drill holes have been made Features and Technical Specifications: - Spindle speed: 3,000 rpm - Drilling width: 240 mm - Max. drilling depth at 90°: 180 mm - Drill head height adjustment: 160 mm - Tool clamping range: 0–20 mm Podpfx Aozk Ni Ted Rorc - Work table rotation: ±60° - Work table length: 565 mm - Work table width: 315 mm - Exhaust port diameter: 90 mm - Output power: 2.2 kW - Supply voltage: 400 V - Power frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: Available shortly Location: Röllbach

Condition: used, Year of construction: 1993, Used Machine Year of Manufacture: 1993 Features and Technical Specifications: - 2-jaw drill chuck for shanks up to 20 mm in diameter - Pneumatic position adjustment - On 2 levels: 0–100 mm - Max. drilling depth: 150 mm Predpfx Adjz I Uffj Rec - Precision indexing rail, 12 mm - Center locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor: 1.5 kW - Speed: 2,800 rpm - Lowerable slotted hole drilling unit with 2 program cams - Machine weight: approx. 310 kg - Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop)

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Prsdpeythcrofx Ad Roc Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, Door lock milling machineused, good conditionmake Haffnertype SL 100machineNo. 2269upright machinechain setdoor supportworkpiece supportpusher hole motorforend motorlubricatorsuction connection D 80/100 mmspace requirement approx. 1200 mm x 700 mm x 2000 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Podpfxjvwfmfe Ad Rerc

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism LxWxH 850x1000x1050 mm Prsdezk Nupspfx Ad Rsc Weight approx. 240 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Door lock mortiserused, good conditionmanufactured by Haffnertype SL 100stand machinechain set 12 - 17 / 50 x 150 mmworkpiece resthandle hole motorface-plate motorlubricant unitmechanical workpiece clampingrequired space ca. l x w x h mm1500 x 900 x 2010located in  97447 Gerolzhofensale in current condition as seen- free on truck - Podpfx Asvwfv Tsd Rjrc

Condition: used, incl. 7 chain sets Predpfsvvnmljx Ad Rjc pneum. air suspension used, top condition, lots of accessories Wigo brand Stand machine Chain set 7 pieces Door support Workpiece support can be swiveled down - tilted for wedge-conical holes Suction connection D 60 mm Space requirement approx. 1100 mm x 700 mm x 2000 mm Weight approx. 350 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Condition: used, functionality: fully functional, input voltage: 400 V, BÄUERLE horizontal boring machine, very solid construction, 3D table, on chassis, drill bit set included, 400V 16A connection with fuse. Podjyz U R Topfx Ad Rorc

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Features and Technical Specifications: - Drilling depth adjustment via a maintenance-free linear guide - Efficient and economical operation thanks to the quick-lift system; no more laborious cranking - Smooth-running, infinitely adjustable drilling unit - Height adjustment with fine tuning and a gas spring cylinder for weight compensation - Cross-travel and height adjustment with scales and adjustable stops - Vibration-free operation thanks to a robust steel construction - Drilling depth adjustable via a scale and stop - Drill head height adjustment can be fully utilized for vertical slotting - Large-dimensioned gray cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm Prjdpfxezk Nlnj Ad Rjc - Drilling width: 340 mm - Height adjustment: 145 mm - Swiveling drill head: -60° to 60° - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drilling table height: 830 mm - Dimensions: 1,200 × 1,050 × 1,300 mm - Weight: approx. 240 kg

Condition: good (used), Code: 0485 Brand: MASTERWOOD Model: CV1- CE Standard Chain mortising machine for cutting mortises in wooden joinery, doors, furniture, shelves and other items – CE Standard Technical data: Pedjz Et Imjpfx Ad Rjrc Sturdy cast iron frame Max mortise depth 180 mm – Effective depth 150 mm Max mortise length 280 mm Transverse stroke of cutting head 80 mm Vertical stroke of worktable 200 mm Motor 1,8 Hp Max workpiece height 900 mm Suction inlet diameter 120 mm Overall dimensions mm 1000 x 600 x 1750 h Weight kg 170

Condition: good (used), Code: 0423 Brand: ME.SA - ITALY Model: GT 60 S - CE Standard Chain and locks mortising machine with bits and cutters for joinery, wooden joinery, doors, furniture and various – CE Standard Predpfxozgt Edo Ad Rsc Technical data: Max mortise length 250 mm Head transverse stroke mm 100 Head rotation +/- 45° Vertical stroke of upright bracket 250 mm Vertical rotation of upright bracket +/- 45° Max window/door frame height 1000 mm Chain motor 3 Hp Vertical spindle motor 2 Hp Min/max horizontal spindle centre distance 50/130 mm Overall dimensions mm 850 x 900 x 1900 h Weight kg 390

Condition: used, Year of construction: 1988, Slot drilling machine Manufacturer: SCM Type: AS 16 Psdpfx Adezuynus Rjrc Year of manufacture: approx. 1988

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: Prjdpexxb Rrjfx Ad Rsc X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, cleaned, function checked, test run with face-plate motor used manufactured by Festo type KF stand machine door rest base face-plate motor exhaust connection D 50 mm required space ca. l x w x h mm 1200 x 800 x 2000 Pjdpfx Asvwfr Uod Rerc weight ca. 200 kg total connected power 1 kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Podpfjv Hm Nmox Ad Rjrc (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, used manufactured by Haffner type KF20 wall machine workpiece rest lubricant unit Pedpfx Adevwf T Eo Rerc total connected power 1,5 kW located in  97447 Gerolzhofen sale in current condition as seen. Without repair work. Pickup in the short term. - free on truck -

Condition: new, Year of construction: 2026, CORMAK LBM290 PRO Horizontal Wood Boring Machine – Precision and Versatility for Professional Woodworking The CORMAK LBM290 PRO is a precise and multifunctional horizontal wood boring machine designed for intensive operation in woodworking shops, furniture production facilities, and manufacturing plants. Thanks to its stable construction and extensive standard equipment, the machine ensures maximum efficiency and repeatability of drilling operations, even in the most demanding projects. Main advantages of the machine Mortising attachment – enables precise production of rectangular holes and slots. Double-sided tilting of the working unit – allows drilling at any angle within a range of 0–45°. Four-position spindle head – enables quick changing of drill diameters: 16, 20, 22, and 25 mm. Two end stops – ensure repeatability and accuracy during series production. Left/right spindle rotation – increases drilling versatility and allows adaptation to different types of tools. Prsdpsvuq Hljfx Ad Rec Easy one-hand operation – an ergonomic lever provides fast and comfortable control of the drilling cycle. Construction and technology The CORMAK LBM290 PRO horizontal boring machine is built on a heavy-duty grey cast iron base, which effectively absorbs vibrations and minimizes machining errors. The integrated extendable worktable (600 × 300 mm) allows convenient processing of larger workpieces. Drilling height and width adjustments are carried out using precise adjustment knobs and guide systems, ensuring smooth and accurate movement of the working unit. The machine is equipped with a professional Westcott drill chuck (0–20 mm) and a complete set of holders for square chisels. Precision and work efficiency The machine reaches spindle speeds of 1400/2800 rpm, while the maximum drilling depth is 155 mm. A stable and quiet 4.2 kW (S6) motor provides consistent performance even during long operating cycles. Horizontal wood boring machines such as the LBM290 PRO are designed for continuous industrial operation – both for individual production and large series of drilling operations for dowels, hinges, and frame joints. Applications The CORMAK LBM290 PRO horizontal boring machine is designed for: professional woodworking and furniture production facilities, manufacturers of furniture fronts and frame components, workshops specializing in furniture restoration, woodworking technical training centers. Standard equipment Mortising attachment + 1 square chisel 9.5 mm Four-position spindle head 16/20/22/25 mm Westcott drill chuck 0–20 mm Extendable and widened worktable 2 eccentric clamps Angle stop with measuring scale 4 holders for hollow chisels (shank sizes 19/20/28/30 mm) Base with tool storage compartment Left/right spindle rotation Technical specifications Parameter Value Table dimensions 570 × 300 mm Table extension 600 × 300 mm Drilling table height 870 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm Motor power (S6) 4.2 kW Power supply 400 V Two-jaw chuck 0–20 mm Dimensions 570 × 850 × 1340 mm Weight 140 kg

Condition: refurbished (used), Lower and upper drill, tiltable, for chair seats of Old America type or similar products no. 4 independent lower groups, tiltable No. 2 upper vertical oscillating groups Prodpjytr Edsfx Ad Roc

Condition: good (used), Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Predpozqzhbsfx Ad Rjc Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Predpfx Ajvwgayed Rjc