Mortising machine

Haffner Typ KF 20

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS Gjdpfx Asw T Tcwol Uokc 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: good (used), Tailstock Taper size: MK 2 Quill travel: 30 mm Gksdpfx Ajdlp Txol Uoc Height-adjustable Center height of 250 - 285 mm Tiltable from -5 degrees to +15 degrees Base area: 230 x 155 mm Weight: 27 kg

Condition: used, functionality: fully functional, spindle bore: 62 mm, turning diameter: 410 mm, center height: 205 mm, turning length: 1,500 mm, type of input current: three-phase, Parallel lathe Norwich Orion Mod. c 6241 / YZ 1500 Centre height: 205 mm Swing over bed: 410 mm Distance between centres: 1500 mm Bar passage: 62 mm Main motor power: 5.5 HP Gkodjy N T R Iopfx Al Usc Steadies included

Year of construction: 1996, condition: excellent (used), Automatic slotting machine with two oscillating tables BALESTRINI 2CAP Maximum length of the groove 120 mm Maximum recess depth in mm 80 Spindle speed 9000 rpm Gedpfx Aljgmucps Uskc Spindle motor 3 Hp Oscillating motor Hp 1 Pneumatic clamp for the workpiece Overall dimensions: mm 1000 x 900 x 1250 Weight kg 500

Condition: used, mileage: 21,000 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #129 MAN TGS 28.470 6x2-2 BL Wiedemann SUPER 2000 – available upon request Chassis * MAN * TGS 28.470 * 6x2-2 BL * 4 * 470 HP/346 kW * EURO 6 * Engine D2676LF52 * MAN Tronic transmission control MAN Comfort Shift ZF 16 S 252 OD * N-drive NMV 221 f=0.98 /drive flange 150 mm for NMV 8-hole * 3,900 + 1,350 mm wheelbase * Front suspension: parabolic 9.5t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue tank * 385/55 R 22.5 STEER-AXLE TL 160&K * 315/70 R 22.5 DRIVE-AXLE TL 154/150&K * 385/55 R 22.5 STEER-AXLE TL 160&K * Chassis color RAL 9011 graphite black Godpfxovh H Hhj Al Uokc * Cab color RAL 2004 deep orange * Halogen beacons * “M” cab 2,240 mm wide 1,880 mm long * Air conditioning * MAN Media Navigation Package / video function via USB/SD / 7” color display / MAN Camera View / AUX-in / USB / Comfort hands-free for 2 mobile phones Body * Wiedemann enviro tec * Super 2000 8.0/6.0 water recycling * 14,000-liter tank * 6,000 liters fresh water * 8,000 liters waste water * Discharge by tilting the tank 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000cbm/h 80kW * Piping galvanized, DN 150 * Approx. 25m suction hose DN 125 * Suction pipe DN 125 with channel spatula * Silencer High-Pressure System * Uraca P3-45 65, 406 liters at 175 bar * Hydraulic high-pressure hose reel with approx. 180m HP hose DN 32 with automatic rewind * Hydraulic high-pressure hose reel with approx. 80m HP hose DN 13 with automatic rewind Additional fresh water system * Speck NP 25/50-150, 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN10 Special features * Sludge tank made of material 1.4301 * Suction and HP boom * 20-liter hand washing unit (heated) * Stainless steel toolbox * Control cabinet with display * Engine – start can be controlled from control cabinet * NMV – start can be controlled from control cabinet * Radio remote control with display * Equipment cabinet with two flaps – access on both sides * Hose tray * High sound insulation of pump compartment * LED worklights * Central lubrication system Technical data * Unladen weight 18,500 KG * Permissible GVW 28,000 KG * Length 10,400 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or photos, please contact us directly. You will find a wide range of further vehicles available for PURCHASE or RENT on our website: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under exclusion of any warranty.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Gksdpfxow T Tfro Al Uec Programmable rotation speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Number of simultaneous axes: 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.

Condition: used, Year of construction: 1982, functionality: fully functional, pressing force: 90 t, stroke length: 100 mm, operating speed: 7 mm/s, reverse speed: 80 mm/s, overall weight: 5,000 kg, CNC Hydraulic Press Brake Brand: Mebusa Model: PH 90-25 Year: 1982 Weight: 5,000 kg Mebusa/Mecos control, model M202 *Capability to create programs with multiple steps. Bending length: 2,500 mm Force: 90 tonnes Axes: 2 (Y, X) Throat depth: 400 mm Stroke: 100 mm Approach speed: 45 mm/sec Working speed: 7 mm/sec Return speed: 80 mm/sec Delivered with: - New four-sided mono-V die (V16 mm, V22 mm, V32 mm, and V50 mm) in 835 mm sections - Set of punch tools for 2,500 mm at 35 degrees - Various batches of Promecam punches, 90 degrees (see photos of punches on pallet) Gjdpex Scv Eofx Al Uskc

Condition: good (used), turning diameter over bed slide: 1,400 mm, turning length: 5,000 mm, Centre lathe ZERBST - DPS 1400 MACH-ID 582 Make: ZERBST Type: DPS 1400 Gksdpfx Alewvirhj Uec Year: 1976 DBC Turning Length: 5000mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1250mm Spindle bore: 100mm

Condition: good (used), Year of construction: 1957, Ref. -No.: 10573 Manufacturer: VDF Type: W 40 Year of construction: 1957 Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Machine-No.: 030XXXX Turning Diameter: Ø 960 mm Turning Length: 4500 mm Spindle Speeds: Ø 105 RPM Turning diameter over cross slide: Ø 600 mm Gksdpoxmd Upjfx Al Usc Further information: The machine can be viewed under power by arrangement.

Condition: excellent (used), operating hours: 186 h, overall weight: 110 kg, warranty duration: 12 months, I sell used and new machines for dry ice cleaning. The offered unit is used and comes with a 1-year warranty. The machine has only 186 operating hours. The set includes one nozzle of your choice. Also included are a hose for dry ice blasting and an applicator. There is a hose for compressed air supply. Hose holders and transport straps are included. Gjdpfey Hf Hvsx Al Uekc