Used Alzmetall ab 4 sv for sale (155)

ALZMETALL AB 4 SV

€4,500

Call

Condition: used, Year of construction: 1980, Column drilling machine ALZMETALL type AB 4 SV Machine. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm spindle mount MK 4 - short spindle sleeve throat 340 mm pinol stroke 180 mm table size 710 x 560 mm column diameter 160 mm spindle speed 30 - 765 rpm infinitely variable motor power 2,3 and 3,4 kW pole changeable Mains connection 380 Volt, 50 Hz - Spindle speed via 2 gear stages and infinitely variable via variator gearbox - Preload stage for high torque at low speeds - spindle on/off via rotary switch or electric foot switch - automatic feed 0,1 - 0,2 - 0,3 mm/rev Bil79k9iyc - table height adjustment via hand crank - machine base with machined workpiece support surface - LED lighting device space requirement L x W x H 1200 x 725 x 2050 mm weight 615 kg good condition

more

Listing

Düsseldorf

7,661 km

Alzmetall AB 4 SV

Call

Condition: good (used), Year of construction: 1984, Drilling capacity in steel (diameter) 35 mm throat 345 mm drilling stroke 170 mm Bcsqhuilbrc table clamping surface 600 x 450 mm spindle mounting MK 4 feeds 0,09 - 0,16 - 0,28 mm/rev total power requirement 3 kW Machine weight approx. 800 kg Machine dimensions L x W x H 1.0 x 0.78 x 1.95 m

more

Listing

Schwabach

8,026 km

High-performance pillar drilling machine

ALZMETALL , AB 4 SV

Call

Condition: used, Technical data: Tool holder MK 4 Dmcgsh Drilling capacity with ST60 35 mm drilling capacity with cast iron 45 mm 1 speed series infinitely variable approx. 80 - 240 rpm 2 speed series infinitely variable approx. 240 - 720 rpm 3 feeds 0.09 + 0.16 + 0.28 mm/rev. table area, WxD approx. 720 x 560 mm motor power: 2,5 kW throat depth: 340 mm quill stroke approx. : 170 mm max. distance table-spindle nose 660 mm column diameter 160 mm dimensions: WxDxH approx. 700 x 1050 x 1950 mm weight estimated approx. 0,6 to .

more

Listing

Rödermark

7,854 km

ALZMETALL AB 4 SV

Call

Condition: good (used), Year of construction: 1987, machine/vehicle number: 18948, Offer no. 17469 Technical data: - Drilling capacity in steel ST 60 40 mm - drilling capacity in steel ST 60 50 mm Bg3cp9k8 - tapping attachment - Drilling spindle holder MK 4 - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable with primary reduction gearing - stage 1 - 80 - 210 rpm - stage 2 - 210 - 765 rpm - throat 330 mm - 3 feeds 0,1 - 0,2 - 0,3 rpm - hydr. feed cylinder for semi-automatic operation + rapid traverse - table with 2 T-slots 720 x 360 mm - table height adjustable via toothed rack with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined foot plate - drilling spindle 1250 mm - illumination - coolant device - swivel arm control panel - drive 400 V 4 kW - space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

more

Listing

Bühl

7,895 km

ALZMETALL AB 4 SV

Call

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 35 mm Bazv8nkqzvl throat 345 mm bore stroke 170 mm table surface area 600 x 450 mm spindle taper MK 4 spindle turning speed range 65 - 1200 U/min feeds 0,09 - 0,16 - 0,28 mm/U total power requirement 3 kW weight of the machine ca. 800 kg dimensions of machine L x W x H 1,0 x 0,78 x 1,95 m - with thread cutting attachment Accessories: drill chuck RÖHM 1 - 13 mm, coolant

more

Listing

Kaczynek

8,366 km

Pillar drilling machine

Alzmetall AB 4 SV

€3,900

Call

Condition: used, Pillar drilling machines Cp2j37no

more

Listing

Goldenstedt

(dealership location)

7,654 km

Gang Drilling Machine

ALZMETALL AB4 SV, RVT 4/3

Call

Condition: used, Year of construction: 1978, number of spindles 3 bore capacity in steel (diameter) 40 mm bore stroke 180 mm Benrsuhob7 weight of the machine ca. 2,3 t

more

Listing

Beli Manastir

8,714 km

pillar drill

Alzmetall AB 40/SV

€8,500

EXW ONO plus VAT

Call

total height: 186 cm, drilling capacity: 40 mm, column diameter: 145 mm, spindle mount: MK 4, table width: 430 mm, table length: 615 mm, overall weight: 415 kg, type of input current: three-phase, sheet thickness steel (max.): 40 mm, height adjustment type: mechanical, drill spindle stroke: 160 mm, Condition: like new (used), Year of construction: 2019, Functionality: fully functional, Equipment: Lighting, The machine was purchased at the end of 2019, it worked for less than 3 years (until 09/2022). - automatic shift 0.1-0.2-0.3-0.4 mm/turn - drilling in steel (St 60) up to 40 mm - drilling in cast iron (EN-GJL-200) 46 mm - short shaft with MK 4 mount - distance of the drill head from the post: 300 mm - table dimensions: 615 x 430 mm - T-slots, number x width x distance: 2 x 14 x 224 mm - height from shaft to table, min/max: 147/688 mm - column diameter: 145 mm - stroke: 160 mm - drill height without options: approx. 1865 mm - net weight approx.: 450 kg - stepless regulation of the number of revolutions - engine: 750/1500 rpm; 1.8/2.9 kW; 400V/50Hz - spindle speed: 100-1600 or 200-3200 rpm stepless adjustment Nuh0uts3 - electromagnetic clutch with overload protection - voltage converter 24V for lighting and control - main switch - clutch with overload protection - stepless regulation of the number of revolutions - digital reading of the number of revolutions - STOP safety button (mushroom shape) - drill table with T-slots - IP 54 protection - insulation class F motor (155°) - oil: first filling - spindle with electrical protection - left-right switch - separate tank with a volume of 33 l - pump with motor - complete fittings Machine vise 155 mm - compact machine vice for clamping workpieces on drills - jaw with horizontal and vertical prism for round material - width of panels: 155 mm - max. vise opening: 230 mm - height: 112 mm - weight: 29.0 kg

more

Listing

Murr

7,943 km

Alzmetall AB 40/SV

€6,600

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: PRJ 050258, For sale is a column drilling machine type AB 40/SV from Alzmetall. The drilling machine is fully functional and can be inspected on site after a telephone arrangement. Bmtxrakx3g

more

Listing

Haiger

7,769 km

Drilling Machine

Alzmetall AB 40/SV

€9,750

Call

Condition: as good as new (ex-display), Year of construction: 2012, Universal Drilling Machine from Alzmetall apply for toolmaker , mold maker, educationand Locksmith 2jeh3pevg Drilling capacity : 45mm Spindle : MK 4 apacity 45mm Spindle MK 4 Speed 65-1750 U/min Feed Yes 0,1 - 0,2 - 0,3 Hit 165mm Power supply 50Hz 380V Motor 2,4KW Weight ca. 500kg

more

Listing

Ahaus

(dealership location)

7,617 km

ALZMETALL AX 4 SV

Call

Condition: new, bore capacity in steel (diameter) 55,0 mm throat 300 mm bore stroke 120 mm threading M 36 in St 60 turning speeds 70 - 1.200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0,10 + 0,30 mm/U weight 380 kg Machine height 1850 mm Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: I2gvohlhi - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12.

more

Listing

Aach

7,993 km

ALZMETALL AB 25 SV

Call

Condition: reconditioned (used), PILLAR DRILLING MACHINE ALZMETALL FROM 25 SV Cb8waik speed range: 65 - 1750 rpm feed rate: 0.15 mm spindle stroke 160 mm Drilling quill: MK 3 2 pcs. Drill chuck 2 pcs. Machine vice 1 pc. Tapping head

more

Listing

Gütersloh

7,706 km

drill press

Alzmetall AB 4 SJ

€3,200

Call

Condition: used, Feed in 3 speeds Tool holder: MT 4 Stepless speed adjustment 7vmtwst7bm

more

Listing

Schemmerhofen

8,027 km

Alzmetall AB 40 SV

€4,400

High performance pillar drilling machine

Call

throat depth: 350 mm, drilling capacity: 40 mm, Condition: excellent (used), Alzmetall AB 40 SV with thread cutting device and height extension (300 mm which can also be removed) Drilling capacity in steel 40 - 45mm in cast iron 45 - 50mm Speeds 65 - 1750 infinitely variable in 2 gear stages Spindle stroke 180 MK 4 Feed rate 3 steps Bikmti0vo98 Drive 3 KW Table D 560 rotatable throat depth 350 Coolant device Dimensions : H 2,3m ( without extension 2m ) D 1,2m W 0,6m Weight approx. 600 KG Condition : very good , all functions perfect Free loading Schemmerhofen

more

Listing

Rödermark

7,854 km

ALZMETALL AB 34 SV

Call

Condition: good (used), Year of construction: 2011, machine/vehicle number: PRJ044435, Offer 23393 Technical data: - Drilling capacity in steel ST 60 34 mm - Drilling capacity in steel ST 60 40 mm - Tapping device ST 60 up to M 24 - Drill spindle holder MK 4 - Drill spindle stroke 160 mm - throat depth 330 mm - Table with 2 T-slots 610 x 430 mm - max. distance table - drill spindle approx. 665 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drill spindle speed infinitely variable 100 - 1800 rpm - Digital speed display - Lighting system - Drive 400 V / 0.6 / 1.8 kW - Space requirement approx. W 1000 x H 2050 x D 1150 mm Bhz9v8eq32w - Weight approx. 470 kg

more

Listing

Friesenheim

7,898 km

Alzmetall AX3 SV I Neu ab Lager

€10,000

Call

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New drilling capacity steel 40 mm Threading steel M24 Cast iron M30 short spindle MK 3 spindle stroke 120 mm Usable throat 293 mm Bgop39j2i2s column diameter 115 mm machine table 515 x 360 mm distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm feed rate 0,1 + 0,2 mm/rev. machine height approx.1840 mm net weight approx. 270 kg Drive stepless motor 750/ 1500 rpm power 1,0 / 1,6 kW spindle speed rpm 80-1125 additional equipment: - Reversing switch - machine light LED - Thread cutting device - Coolant device B Immediately available from stock

more

Listing

Ahaus

(dealership location)

7,617 km

ALZMETALL AB 40 SV

Call

Condition: new, bore capacity in steel (diameter) 40,0 mm throat 300 mm bore stroke 160 mm threading M30 in St 60 0vvpo turning speeds 100-1600 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0,1-0,2-0,3-0,4 mm/U engine output 1,8/2,9 kW weight 450 kg Machine height 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

more

Listing

Berlin

7,943 km

Upright Drilling Machine

Alzmetall AB 4 SJ

Call

Condition: ready for operation (used), Year of construction: 1951, Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm. Bilp07prn0k

more

Listing

Gütersloh

7,706 km

drill press

Alzmetall AB 40 SV

€7,500

Call

Condition: used, Year of construction: 2010, Tool holder MK 40 Drilling capacity up to 40 mm steel tapping device C9wxqci Stepless speed adjustment with digital display Digital drilling depth display Electromagnetic feed Coolant pump

more

Listing

Krefeld

7,636 km

High performance pillar drilling machine

ALZMETALL AB 4

Call

Condition: used, Year of construction: 1952, Bohrleistung in Stahl (-Ø 36 mm throat 350 mm bore stroke 180 mm Bohrleistung in Guß (-Ø 45 mm spindle taper: MT 4 spindle head adjustment Ý 500 mm table surface area 600 x 700 mm 7gwty27000 floor plate: 460 distance work spindle /surface of the table 80 - 750 mm spindle turning speed range 0,09 - 0,28 U/min feeds 380 mm/WU voltage 50 V power capacity 1,7 / 2,6 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 0,6 x 1,1 x 2,1 m

more

Listing

Rödermark

7,854 km

ALZMETALL AB 4 SJ

Call

Condition: good (used), Year of construction: 1968, machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation Cmnrpern - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

more

Listing

Offenburg

7,893 km

Alzmetall Alzstar 40/SV I Neu ab Lager

Call

Condition: new, Column drilling machine Alzmetall Alzstar 40/SV Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev. height (mm): approx. 1840 drilling capacity St 60 (mm): 40 spindle stroke (mm): 120 throat (mm): 293 motor (kW): 1,45 / 1,9 Speed range (r/min): 160 - 2250 weight (kg): 285 Dnrbmdivd

more

Listing

Ahaus

7,617 km

ALZMETALL AB 34 SV

Call

Condition: new, bore capacity in steel (diameter) 34,0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm bore capacity in cast iron 40,0 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min feed 0,1-0,2-0,3-0,4 mm/U total power requirement 1,4 / 2,2 kW weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse Nloin - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

more

Listing

Kassel

7,801 km

ALZMETALL AB 25 SV

Call

Condition: good (used), Year of construction: 1970, pillar drilling machine make ALZMETALL type AB 25 SV Machine # 1067 Year of manufacture 1970 D7pldsg Technical data: Drilling capacity in ST 60 28 mm drilling capacity in GG 20 30 mm drilling capacity in ST 60 32 mm spindle mounting MK 3 throat 293 mm column diameter 115 mm table size 500 x 400 mm clamping surface 400 x 300 mm infinitely variable spindle speed 65 - 1750 rpm. mechanical feed 0,14 mm/rev. machine height approx. 1845 mm weight approx. 320 kg used

more

Listing

Ahaus

7,617 km

ALZMETALL AB 50 SV

Call

Condition: new, bore capacity in steel (diameter) 50,0 mm throat 350 mm bore stroke 200 mm threading M 42 in St 60 turning speeds 60 - 1.530 U/min table: 720 x 510 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 200 mm feed 0,15-0,2-0,3-0,36 mm/U engine output 3,6 / 4,3 kW weight 605 kg Machine height 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display Ciqpi39udl - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

more

Listing

Bad Münder am Deister

7,745 km

Alzmetall AB4/SV

Call

Condition: excellent (used), machine/vehicle number: 7344, Column drilling machine make: Alzmetall, type: AB4/SV, SN: 7344, up to 720 rpm, stroke: 180 mm, table size: 730 x 560 mm Dm79zh

more

Listing

Lahr/Schwarzwald

7,901 km

Upright Drilling Machine

ALZMETALL AB 25SV

Call

Condition: used, Year of construction: 1987, bore capacity in steel (diameter):25 mm throat:285 mm bore stroke:150 mm table surface area:610 x 470 mm turning speeds:80 - 1.400 U/min weight of the machine ca.:500 kg incl. drilling chuck, De89nxkm incl. cross table incl. DRO automatic boring feed from small factory , very good condition

more

Listing

Hessisch Lichtenau

7,826 km

ALZMETALL AB 3 ESV

€4,000

Call

Condition: used, Year of construction: 1977, Column drilling machine ALZMETALL type AB 3 ESV Machine. No. 15967 Year of construction 1977 drilling capacity 32 mm spindle mount MK 3 - short spindle sleeve throat 290 mm pinol stroke 160 mm B2pcd0gr table size Ø 545 mm column diameter 220 mm spindle speed 55 - 1450 rpm infinitely variable motor power 1 / 1,6 kW Mains connection 380 volt, 50 Hz. - Spindle speed via 2 gear stages, 2 motor speeds and stepless via variator gearboxes - Pre-feed stage for high torque at low speeds - MK adapter from MK3 to MK4 - automatic feed 0,1 - 0,2 - 0,3 mm/rev. - rotatable drilling table - table height adjustment by hand crank - machine base with machined workpiece support surface - lighting for the working area space requirement L x W x H 1150 x 650 x 2000 mm weight 850 kg good condition

more

Listing

Bünde

7,699 km

3-fold row drilling machine

ALZMETALL AB 3 ESV

Call

Condition: used, bore capacity in steel (diameter) 28 mm throat 285 mm bore stroke 150 mm table-size 620 x 470 mm Column diameter 130 mm spindle turning speed - stepless 65-1200 U/min spindle taper MK 3 feed 0,1 / 0,2 / 0,3 mm/U. Bb9u9iwjdlt Drive 1,47 kW weight of the machine ca. 380 kg dimensions of the machine ca. 0,85 x 0,6 x 1,8 m Electric 380 Volt Collets MK Machine with infinitely variable speed control, 2-stage gearbox, aut. feed and base plate with flutes.

more

Listing

Ahaus

7,617 km

Bench Drilling Machine

ALZMETALL AB32/SV-RFT 20

Call

Condition: used, Year of construction: 2002, bore capacity in steel (diameter) 32,0 / 40,0 mm throat 322,5 mm bore stroke 160 mm threading M 24 spindle taper 4 MK table: 915 x 935 mm T-slots 3 x 14 x 112 mm table height 780 mm distance spindle /table 304 - 998 mm turning speeds 65 - 2000 U/min column diameter 145 mm total power requirement 1,4 / 2,2 kW weight 805 kg range L-W-H 1200 x 800 x 2000 mm current new price approx. 16,700 euros Special price on request DRILLING MACHINES HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT RFT 20 Furnishing: - pole-changing motor E2lfxru - Continuous speed adjustment including digital speed display - Spindle feed with electro-magnetic engagement - adjustable spindle feed (mm/rev) - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Cross table with digital display for 1 axis - EMERGENCY stop button at the front - Coolant system without container * Machine link: ?machineno=1008-9093638

more

Listing

Mörsdorf

7,965 km

ALZMETALL AB 3 ESV

Call

Condition: used, 3-fold line boring machine make ALZMETALL type AB 3 ESV Technical data: 1) ALZMETALL type AB 3 ESV drilling capacity in steel/cast iron 28/32 mm spindle mounting MK 3 with automatic feed 0,1/0,2/0,3 mm/rev. spindle speeds 110 - 1450 rpm. make # 17097, year of manufacture 1980 2) ALZMETALL type AB 3 ESV drilling capacity in steel/cast iron 28/32 mm spindle mounting MK 3 with automatic feed 0,1/0,2/0,3 mm/rev. spindle speeds 110 - 1450 rpm. make # 17198 year of construction 1980 with - thread setting device 3) ALZMETALL type AB 3 ESV drilling capacity in steel/cast iron 28/32 mm Cvohkv3vnt spindle mounting MK 3 with automatic feed 0,1/0,2/0,3 mm/rev. spindle speeds 65 - 1250 rpm. Year of manufacture 1972 - common clamping table 1400 x 600 mm - table height adjustable - cooling device used € 4.900,-- special price ex stock Mörsdorf slightly in need of overhaul (a.o. left drilling head)

more

Listing

Sonsbeck

7,606 km

Column drilling machine, pillar drilling machine

Alzmetall AB 3/ESV

€1,950

Call

Condition: used, Art. No.: Drill 010 with vice jaw width 140 mm quick-action chuck 3-16 mm spindle mounting: MK 3 Manufacturer: Alzmetall Type: AB3-ESV switch off at zero position emergency stop switch illumination motor 1,5 KW 2 speeds weight approx. 380 kg column diameter: 130 mm 160-1420 rpm stepless Counterclockwise rotation/clockwise rotation Thread cutting possibility Bfrlfzy2 Automatic feed with several speeds Working table with T-slots, adjustable and lockable Height adjustable via toothed rack with hand crank Space requirement approx. W 750 x H 1900 x D 700 mm

more

Listing

Leipzig

7,966 km

ALZMETALL AB4SV

Call

Condition: used, bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° Huzjqo8 table adjustment: vertical 600 mm column diameter: Ø 160 mm total power requirement: kW weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Thread cutting with right and left rotation via foot switch Table adjustment by means of hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D.

more

Listing

Holm

7,670 km

Hochl. Column drilling machine

ALZMETALL AB3 Modell ESV

€2,990

ONO plus VAT

Call

Condition: used, machine/vehicle number: nicht zutreffend, Description Drilling Machine, Floor Standing Drilling Machine, Pillar Drilling Machine -table size: 315 mm 0sz7pj9dq -spindle mounting: MK3 -throat: 285 mm -speeds: 200 - 1400 rpm -columns: Ø 130 mm -spindle stroke: 150 mm -gearbox: VIP -feed rate: 0,1-0,3 mm/rev. -dimensions: 440/900/H1900 mm -weight: 408 kg Turntable and coolant pump Data subject to change....

more

Listing

Rödermark

7,854 km

ALZMETALL AB3/ESV

Call

Condition: good (used), Year of construction: 1970, machine/vehicle number: Unbekannt, QUOTE Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm Bpfmhori - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

more

Listing

Wiefelstede

7,607 km

Stand drill MK3

Alzmetall AB3/ESV

€2,650

Call

Condition: used, Year of construction: 1956, Drill press, drill press, stand drill, pillar drill -Speed display: (clock) defective -Table size: Ø 315 mm -spindle taper: MK3 -Projection: 285 mm -Speeds: 200 - 1400 rpm -Columns: Ø 130 mm -Spindle stroke: 150 mm -Gear: VIP -Feed: 0.1-0.3 mm/rev Nlgwh -Dimensions: 440/900/H1900 mm -Weight: 408 kg

more

Listing

Velen-Ramsdorf

(dealership location)

7,624 km

NEW pillar drilling machine

ALZMETALL Alzstar 40/SV

Call

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Btplxdpsqt Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

more

Listing

Feucht

(dealership location)

8,032 km

Saulenbohrmaschine

ALZMETALL AX 3/SV

Call

Condition: new, Column drilling machine Make: ALZMETALL Model: AX 3/SV Condition: New machine Qhfveax0g Speed 80 - 1.125 RPM serially equipped with: - Speed adjustment, infinitely variable - Speed display, digital - feed overload protection - spindle protection - Instruction manual further important technical data: - 40 mm drilling capacity in ST 60 - 120 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - feed rate 0,1 + 0,2 mm/rev - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension

more

Listing

Günzburg

8,038 km

ALZMETALL ALZSTAR 40/SV

Call

Condition: new, Drilling capacity in St 60 40 mm Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm machine table - usable support 514x360 mm T-slots number - width - distance 2 x 14 x 224 mm Cea3d737us distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Machine weight approx. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right/left rotation - motor protection switch - Speed adjustment stepless - digital speed display - feed overload protection - protection class IP 54 - Connector plug (ready mounted, cable length 2 m) - Spindle protection with electrical fuse

more

Listing

Ahaus

7,617 km

ALZMETALL ALZSTAR 40 SV

Call

Condition: new, bore capacity in steel (diameter) 40,0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 514 x 360 mm turning speeds 160 - 2.250 U/min Beob0cy3em column diameter 115 mm feed 0,10 + 0,20 mm/U total power requirement 1,45 / 1,9 kW weight 285 kg range L-W-H 0,5 x 0,8 x 1,84 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

more

Listing

Mindelheim

8,079 km

Heavy duty pillar drill

Alzmetall AB 5 / S

Call

Condition: good (used), Year of construction: 1958, Technical data: Tool holder: MK 5 Drilling capacity: 60 mm Speed, infinitely variable: 40 - 800 1/min Spindle stroke: 310 mm Feed rates: (5) 0.1 - 0.4 Table size: ø 610 mm Projection: 385 mm Column diameter: 220 mm Bcybt7d7 Motor power: 4 kW Connection: 400 V 16 A Weight, approx.: 1300 kg Dimensions (WxDxH), approx.: 750 x 1600 x 2370 mm Equipment: - Machined base with T-slots - Infinitely variable speed adjustment - Feed device - Coolant foot without pump - R- L- run - Drilling depth stop - Analog speed display - Service incl. oil change

more

Listing

Hessisch Lichtenau

7,826 km

ALZMETALL AB 60 S

€7,000

Call

Condition: used, Year of construction: 1987, Column drilling machine ALZMETALL type AB 60 S Bdnlrr20vw Machine No. 228 Year of construction 1987 drilling capacity in steel 65 mm drilling capacity in cast iron 75 mm spindle adaptor MK 5 - short spindle sleeve throat 400 mm pinol stroke 240 mm table size 730 x 540 mm column diameter 260 mm spindle speed 40-1200 rpm infinitely variable motor power 5 and 7,5 kW pole changeable mains connection 400 Volt, 50 Hz - automatic feed in 5 steps 0,1-0,14-0,2-0,28-0,4 mm/rev. - preload stage for high torque at low speeds - tachometer for spindle speed - Table height adjustment via hand crank - Clamping surface at machine base 500 x 500 mm - Coolant pump in machine base Space requirement L x W x H 1600 x 900 x 2370 mm weight 1500 kg good condition

more

Listing

Schwabach

8,026 km

Highl. Column drilling machine

Alzmetall , AB 40 HST

Call

Condition: good (used), Year of construction: 1992, Technical data : Drilling capacity in ST 60 45 mm Cmwqn8ewt Thread capacity in ST 60 M 42 4 speed ranges, infinitely variable 60-210 / 120-420 / 210-765 / 420 - 1530 rpm Short spindle MK 4 4 drilling feeds 0.15 - 0.2 - 0.3 - 0.36 mm/rev. . throat depth approx. 330 mm spindle stroke approx. 180 mm Table size, W x D approx. 600 x 460 mm . .

more

Listing

Rödermark

7,854 km

Alzmetall AB 3/ES

Call

Condition: good (used), Year of construction: 1979, machine/vehicle number: 20329, Offer 23400 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 long spindle - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable 110 - 1450 rpm - throat depth 290 mm - Max. distance table - drill spindle 620 mm Lzhvwylfov - Table with 2 T-slots 500 x 400 mm - Table height adjustment via rack and pinion with hand crank - Drive 400 V / 1.1 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 300 kg - with: - Quick-action drill chuck 1-13 mm - Machine vice

more

Listing

Velen

7,625 km

ALZMETALL AB 32 HST

Call

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 32 mm throat 350 mm bore stroke 180 mm x-axis 550 mm y-axis 300 mm z-axis 300 mm table surface area 650 x 310 mm 0 55 - 4000 U/min feed ja mm/U total power requirement 4,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 1,8 x 2,1 x 2,5 m m Bb0hwssd Drilling machine with: - Positioning control for cross table - feed - Thread cutting device - coolant pump - foot switch Drill is functional. Positioning control has not been checked.

more

Listing

Ahaus

(dealership location)

7,617 km

ALZMETALL AX 3 SV

Call

Condition: new, bore capacity in steel (diameter) 40,0 mm threading M 24 in St 60 throat 293 mm bore stroke 120 mm morse taper 3 Kurzspindel MK table: 360 x 515 mm turning speeds 80 - 1.125 U/min feed 0,10 + 0,20 mm/U total power requirement 1,0 / 1,6 kW weight 270 kg 28qvlf height of the machine 1,84 m Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse - Operating instructions in German including special equipment: - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

more

Listing

Schlüchtern

7,867 km