Pillar Drilling Machine

ALZMETALL AB 4 SV

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm throat 320 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop Gbjlhceyfwzuedwyeh

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Gjljur Hfzehcdwysbh

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Gjljn N Ekcjhcdwyebh Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Year of construction: 1978, number of spindles 3 bore capacity in steel (diameter) 40 mm bore stroke 180 mm weight of the machine ca. 2,3 t Gbelhcsd Ih S Sjdwyeh

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg Gbslhcsgulr Hjdwysh

Condition: used, Column drilling machine - Capacity: 40 mm - Morse taper 4 - Automatic feed - Variable spindle speed: 50-1280 rpm - Spindle stroke: 180 mm - Table: 720x560 mm - Column diameter: 160 mm - Throat depth: 340 mm - Coolant system Gbjlhjx Ttunscdwyjh - Workpiece vise

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm Gbjljv Ehftehcdwyjh bore stroke 200 mm table surface area 720 x 5 mm

Condition: new, Column drilling machine Make: ALZMETALL Model: AX 3 iTRONIC-V Year of manufacture: 2023 Condition: New machine Speed 80 - 1.125 rpm. standard equipped with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop Gbolhcdeh I N Trowyoh - clockwise and counter-clockwise rotation via contactor control - automatic drill feed with feed overload protection - spindle protection - operating instructions other important technical data: - 40 mm drilling capacity in ST 60 - 120 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - feed rate 0,1 + 0,2 mm/rev - 1,45 / 1,9 kW Motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - foot switch, complementary to the threading device - Technology calculator in the display - Drilling depth fine adjustment and fixed stop

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW Gbslowncaishcdwysh - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Gbjlhcdwot Etiyoyoh Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Gjlhcdwegzlpkjyjbh Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm Gbolhcdwjwd Ii Usyeh - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: refurbished (used), functionality: fully functional, spindle mount: MK 4, total height: 1,970 mm, throat depth: 345 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 80 rpm, 1.) Alzmetall AB4/SV Speed range: 80-720 rpm Feed rate: 0.09/0.16/0.28 mm/rev Spindle taper: MT4 Throat depth: approx. 345 mm Drive power: approx. 1.8 kW Column diameter: approx. Ø 160 mm Quill stroke: approx. 180 mm Table clamping area: approx. 730x560 mm with 14 mm T-slots Dimensions: 1000x500x1970 mm Weight: approx. 600 kg Price: €2,400 net plus VAT. 2.) Gillardon GB30 Speed range: 60-1600 rpm Spindle taper: MT3 Throat depth: approx. 320 mm Drive power: 1.1/1.6 kW Gjlhcdsunhtxewyobh Column diameter: approx. Ø 130 mm Quill stroke: approx. 175 mm Table clamping area: approx. Ø 500 mm with 14 mm T-slots Table swivel range: approx. + / – 90 degrees Dimensions: 1000x500x1970 mm Weight: approx. 400 kg Price: €2,200 net plus VAT.

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gelhjgr Udvjcdwyjbh Gap removal display: Scala Hollow pointed joint display: - Dressing stop angle adjustable: yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000mm Weight: 870 kg

Condition: used, Pillar drilling machines Gbolhcsb N Ezrodwysh