Used Haemmerle Ap 35-1600/S4D for sale (10)

Condition: used, functionality: limited functionality, machine/vehicle number: 21196, working width: 3,100 mm, stroke length: 265 mm, throat depth: 400 mm, overall weight: 6,050 kg, input voltage: 380 V, pressing force: 35 t, working length: 1,600 mm, Manufacturer: Hämmerle AG Designation: Hydraulic press brake Type: AP 35-1600/S4D M-No.: 21196 Year of manufacture: unknown Current condition: used, operational Weight: 6 tons Cedpfx Afowptf Sepegn Drawings and circuit diagrams are available and will be handed over on purchase. However, there is no longer a machine manual. The machine is available immediately. The sale is ex works: dismantling, removal, loading and transportation are the responsibility of the buyer.

Year of construction: 1990, condition: used, machine/vehicle number: 22752; Lg-Nr. 12106, Technical data: - Pressure capacity 2000 kN - max working width 3100 mm - bar passage 3200 mm - max. outreach 300 mm - max installation height 965 mm - stroke, resp. offset infinitely variable 0 - 400 mm - ram speed forward + backward 100 mm/sec each - Working speed selectable in 9 steps - 1 10 mm/sec - Drive 400 V / 26,5 kW - space requirement approx. W 4400 x H 3500 x D 2200 mm - Weight approx. 18500 kg Cgedpsbbwznsfx Afpon - with: - CNC - control CYBELEC ModEva 15S year 2007 - back gauge with 4 controlled pneum. lateral - and height adjustable stop fingers - controlled bending aids in the stop area - Hydr. - pneum. Clamping of the upper tool + - lower tool - mot. Crowning / hydro cushion in the table - laterally movable support arms - E - foot switch - split pointing tool R 1-100 t/m , split die

Condition: used, functionality: unexamined, operating hours: 18,758 h, control type: manual, degree of automation: manual, actuation type: hydraulic, bending force (max.): 120 t, stroke length: 165 mm, throat depth: 300 mm, oil tank capacity: 430 l, back gauge adjustment: manual, overall weight: 9,700 kg, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: emergency stop, lower tooling, upper tooling, For sale is a hydraulic press brake from the renowned Swiss manufacturer Hämmerle AG (Zofingen). The machine was purchased used several years ago but has never been put into operation at our facility. It was neither connected nor used productively; instead, it has been stored protected in our workshop for an extended period. Recently, the machine has been kept covered outdoors. The sale is as-is, and the functionality has not been tested. This press brake is ideal for workshops or metalworking businesses looking for a very robust, durable industrial machine without CNC control. Technical specifications (excerpt): • Max. pressing force: 120 tons • Max. stroke: 165 mm • Throat depth: 300 mm • Motor power: 15 HP • Operating voltage: 380 V / 50 Hz • Hydraulic oil: Shell Tellus 68 • Oil tank capacity: 430 liters Codpfxsyguxys Afpogn • Weight: approx. 9,700 kg • Operating hours according to counter: approx. 18,758 h Viewing possible by appointment, currently not connected to power. Loading and transport are the buyer’s responsibility. Sale is without warranty or guarantee, returns excluded.

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Csdpfolzizmox Afpogn

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 22613, bending force (max.): 200 t, stroke length: 400 mm, throat depth: 300 mm, distance between stands: 2,750 mm, working length: 3,100 mm, TECHNICAL DETAILS Press force: 200 t Bending length: 3,100 mm Frame gap: 2,750 mm Stroke: 400 mm Throat depth: 300 mm MACHINE DETAILS Control: CYBELEC DNC7000 Total power requirement: 18.5 kW Oil capacity: 330 l Suitability: Suitable only for thin sheet metal Dimensions & Weight Space requirement: approx. 4,300 x 2,400 x 3,600 mm Machine weight: approx. 18,500 kg EQUIPMENT Electric backgauge (X-axis) CNC crowning 4x controlled backgauge fingers 2x front support arms with SLIDING SYSTEM Cjdpoygw Azofx Afpegn Hydraulic upper and lower tool clamping Side and rear safety guards Tools (3 cabinets) Foot switch Operating manual

Condition: good (used), functionality: fully functional, Year of construction: 1991, Used 2-meter press brake by Hammerle Model: AP 100 2100 Csdpfjyfmmasx Afpegn Capacity: 2100 x 100 tons 3-point bending Upgraded CNC control (approx. 2005) Upgraded Pilz laser safety system Includes tooling Year of manufacture: 1991

Condition: used, Year of construction: 1989, Technical details: pressure: 100 t chamfer lenght: 2600 mm Cgjdpfx Afeu Icdmepen distance between columns: 2300 mm throat: 300 mm control for program: CNC-Steuerung DNC7000 dayligth: 830 mm max. stroke: 265 mm ajustment speed: 80 - 100 mm/sec back gauge: motorisch table-size: 2700 x 113 mm work height max.: 900 mm connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: 11,3 t machine dimensions LxWxH: ca. 3,2 x 3,8 x 3,0 m 3-point BENDING - mould bending -Hydrocushion (for regular force adjustment over the entire working length) -Backstop: width 2200mm, 2x supports travel 1800mm and 4x stop travel W:2550xL:860mm -Control panel on the boom can be swivelled and/or control stand with two-hand and foot control various press brake tools available i.D. *

Year of construction: 1990, condition: ready for operation (used), Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible. Cgsdpfx Afewftdaspon

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Cgjdpfxow A R Spj Afpen

Condition: good (used), functionality: fully functional, Year of construction: 1975, sheet thickness (max.): 4 mm, power: 22.06 kW (29.99 HP), cutting length (max.): 2,500 mm, Old but well-maintained machine Csdpfxor Nvf Uj Afpegn