Used Haemmerle Bm 200-4100 for sale (12)

Condition: good (used), functionality: fully functional, Year of construction: 1995, working width: 4,100 mm, throat depth: 250 mm, overall weight: 20,000 kg, pressing force: 200 t, Hämmerle BM200-4100. The machine was dismantled at the old plant in 2023, but it was not reassembled or put into operation at the new site. Since then, the machine has been kept in storage. All accessories and documentation are included. The machine can be inspected at any time and is immediately available for loading. All data can be found in the pictures... No tools are included, as these were compatible with the new machine. Dkjdpfx Afewa S Dnonsh

Year of construction: 1990, condition: used, machine/vehicle number: 22752; Lg-Nr. 12106, Technical data: - Pressure capacity 2000 kN - max working width 3100 mm - bar passage 3200 mm - max. outreach 300 mm - max installation height 965 mm Dodpfx Asbbwznofnokh - stroke, resp. offset infinitely variable 0 - 400 mm - ram speed forward + backward 100 mm/sec each - Working speed selectable in 9 steps - 1 10 mm/sec - Drive 400 V / 26,5 kW - space requirement approx. W 4400 x H 3500 x D 2200 mm - Weight approx. 18500 kg - with: - CNC - control CYBELEC ModEva 15S year 2007 - back gauge with 4 controlled pneum. lateral - and height adjustable stop fingers - controlled bending aids in the stop area - Hydr. - pneum. Clamping of the upper tool + - lower tool - mot. Crowning / hydro cushion in the table - laterally movable support arms - E - foot switch - split pointing tool R 1-100 t/m , split die

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Dedpfx Afolzizmenekh

Condition: ready for operation (used), Year of construction: 2000, operating hours: 59,827 h, General Data Machine weight 16600 kg Main Drive Pressing force 2000 kN This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information. Application Types Bending Dksdpfx Afsx D Ni Tsneh

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Dkedpfxjwhp Ndj Afnsh

Condition: used, functionality: unexamined, operating hours: 18,758 h, control type: manual, degree of automation: manual, actuation type: hydraulic, bending force (max.): 120 t, stroke length: 165 mm, throat depth: 300 mm, oil tank capacity: 430 l, back gauge adjustment: manual, overall weight: 9,700 kg, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: emergency stop, lower tooling, upper tooling, For sale is a hydraulic press brake from the renowned Swiss manufacturer Hämmerle AG (Zofingen). The machine was purchased used several years ago but has never been put into operation at our facility. It was neither connected nor used productively; instead, it has been stored protected in our workshop for an extended period. Recently, the machine has been kept covered outdoors. The sale is as-is, and the functionality has not been tested. This press brake is ideal for workshops or metalworking businesses looking for a very robust, durable industrial machine without CNC control. Dksdpfoyguxyox Afnsh Technical specifications (excerpt): • Max. pressing force: 120 tons • Max. stroke: 165 mm • Throat depth: 300 mm • Motor power: 15 HP • Operating voltage: 380 V / 50 Hz • Hydraulic oil: Shell Tellus 68 • Oil tank capacity: 430 liters • Weight: approx. 9,700 kg • Operating hours according to counter: approx. 18,758 h Viewing possible by appointment, currently not connected to power. Loading and transport are the buyer’s responsibility. Sale is without warranty or guarantee, returns excluded.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 22613, bending force (max.): 200 t, stroke length: 400 mm, throat depth: 300 mm, distance between stands: 2,750 mm, working length: 3,100 mm, TECHNICAL DETAILS Press force: 200 t Bending length: 3,100 mm Frame gap: 2,750 mm Stroke: 400 mm Throat depth: 300 mm MACHINE DETAILS Control: CYBELEC DNC7000 Total power requirement: 18.5 kW Oil capacity: 330 l Suitability: Suitable only for thin sheet metal Dimensions & Weight Dkjdpfxeygw Azj Afneh Space requirement: approx. 4,300 x 2,400 x 3,600 mm Machine weight: approx. 18,500 kg EQUIPMENT Electric backgauge (X-axis) CNC crowning 4x controlled backgauge fingers 2x front support arms with SLIDING SYSTEM Hydraulic upper and lower tool clamping Side and rear safety guards Tools (3 cabinets) Foot switch Operating manual

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, ELECTRONIC RETROFIT IN 2001 Maximum press force 2000 kN That equals 200 tons Maximum working length 3100 mm Maximum stroke 400 mm Throat depth 250 mm Machine weight 16,600 kg Electrical data Operating voltage 400 V, 50 Hz Control voltage 24 V DC Power Main motor 22 kW Total connected load 28 kW Fuse rating 100 A Hydraulic oil specification HLP46 or HLP68 Dodpfx Afeyf Ibxsnjkh HM46 or HM68 his machine is equipped with CNC numerical bending control. Bending method 3 point bending, Normal mode Measurement and positioning axes visible in control Y1 and Y2 for ram positioning X axis for backgauge depth Z axis for backgauge lateral positioning R axis for backgauge height Typical positioning accuracy for this class of machine Backgauge repeatability approx ±0.05 mm Bending angle accuracy depends on tooling and material, typically ±0.3 to ±0.5 degrees The control calculates bend angles based on Material thickness Tool geometry Press force Bend allowance Main intention of use The primary purpose of this machine is precision bending of sheet metal parts. Typical operations Straight bends Box shapes U bends Complex multi step formed parts It is designed for medium to heavy gauge sheet metal over long bending lengths.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 590.067, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: HÄMMERLE, bending force (max.): 100 t, working width: 2,100 mm, stroke length: 265 mm, throat depth: 250 mm, number of axes: 2, table height: 850 mm, type of crowning: manual, oil tank capacity: 200 l, back gauge adjustment: manual, back gauge: 600 mm, overall weight: 7,800 kg, total length: 3,200 mm, total width: 1,800 mm, total height: 2,500 mm, power: 18 kW (24.47 HP), input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, The machine is fully functional, in working condition, with all main mechanical, hydraulic, and electrical components operating correctly. The press brake was used in industrial production and serviced regularly. Main specifications: Dsdjx Tf I Hepfx Afnekh Maximum bending force: 100 t Working length: 2,100 mm Ram stroke: 265 mm Throat depth: 250 mm Total power: 18 kW Power supply: 400/230 V, 50 Hz Machine weight: approx. 7,800 kg The press features a robust industrial design, suitable for continuous series as well as small batch sheet metal processing. Control is standard (not CNC). The back gauge is manually adjustable. Essential safety systems are included, such as emergency stop and foot pedal control. The machine is available immediately and can be inspected under power. Assistance with loading can be arranged. Documentation is available upon request.

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Dodpew A R Spofx Afnskh

Year of construction: 1990, condition: ready for operation (used), Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible. Dkodpfx Aowftdaofneh

Condition: ready for operation (used), Year of construction: 1985, Cutting length 4080 mm, cutting capacity 10 mm, motor 22 KW, working high 800 mm, back gauge 1000 mm motorised, cutting line, footpedal, 4 frontarms, maschine can be lower down by 200 mm, dimension 5300x2500x2300 mm, ca. 16000 kgs Dodpfx Aohl Im Nsfnjkh