Used Metallkraft Fsbm 1020-25 E for sale (45)

Condition: used, sheet width 1020 mm plate thickness 2,5 mm bending angle max. 135 ° Nkjdowcg D Iepfx Ab Usw stroke of upper beam 25 mm weight of the machine ca. 285 kg dimensions of the machine ca. 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application

Condition: new, - Working width 1020 mm - Max. sheet thickness approx. 2,5 mm (St 40) Nkjdecca Rgopfx Ab Uew - Max. Bending angle 135 Accessories: - segmented upper beam - Foot pedal for tensioning - instruction manual

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Nksdpfsg U Uv Rox Ab Uew Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, Njdpfxeg N Nl Io Ab Uokw M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm Nkodpfjg N Nl Dsx Ab Uew

Condition: like new (used), Year of construction: 2020, Metallkraft Sickenbiegemaschine SBM 140-12 E Motor-driven bead forming machine with machine base, control console, and stop plate for producing various bead profiles and depths. Roller length: 140 mm Bending capacity steel 400 N/mm²: max. 1.2 mm* Rollers: Ø 62 mm Throat depth: 100 mm Roller speed: 8 m/min Motor power: 0.75 kW | 400 V - 50 Hz Protection class: IP 55 Dimensions (LxWxH): 900 x 1350 x 450 mm Weight (net): approx. 110 kg Nsdpoxqp R Rofx Ab Uokw Includes standard rollers S1-S8 and tool key Demonstration machine, used once

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,800 mm, total length: 2,250 mm, total width: 1,400 mm, feed rate X-axis: 25 m/min, grinding wheel diameter: 205 mm, table length: 500 mm, type of input current: three-phase, table width: 250 mm, grinding wheel width: 19 mm, spindle speed (max.): 2,900 rpm, overall weight: 1,350 kg, grinding spindle motor power: 1,500 W, rotational speed (max.): 2,900 rpm, grinding spindle speed: 2,900 rpm, power: 1.5 kW (2.04 HP), grinding wheel speed: 2,900 rpm, input voltage: 400 V, disc diameter: 205 mm, Metallkraft FSM 2550 Surface Grinder Machine Type: Surface Grinder with NC Controlled Vertical Feed Year: 2018 Control: NC Control Condition: Very Good Includes NC Controlled Vertical Feed Table Enclosure Guard Electro-Magnetic Chuck Wheel Dresser Coolant Equipment Halogen Light DRO Auto-Lube Nkedpfxev Iq Shj Ab Uew Technical Specifications Grinding Wheel Diameter: 180 to 205mm Grinding Wheel Width: 19 to 13mm Grinding Wheel Bore: 31.75mm Spindle Speed: 2900rpm Table Dimensions: 500 x 250mm X Axis Travel Speed: 5-25m/min Drive Motor Power: 1.5kW Electrical Connection: 400V/3Phase/50Hz Machine Dimensions: 2250x1400x1800mm Machine Weight: 1350kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, saw blade diameter 315 mm cutting diameter 90 mm stroke -- mm mitre joint cuts -/+ degrees -45 + 45 Grad turning speeds 40 / 80 U/min Nedpfxsibw Sms Ab Uskw weight of the machine ca. 165 kg dimensions of the machine ca. 1,0 x 1,15 x 1,48 m Manual metal circular saw MKS 315 N Action set / Item no. 3620303SET - two cutting speeds - Rotatable machine head 45° to the left and 45° to the right - Reduction gear, running quietly in an oil bath - automatic diaphragm coolant pump with coolant filter - Vice with counter vice, quick release and anti-burr jaws guarantees a precise and burr-free cut - Lateral material support arm with roller - Vice swivels 45° to the left and 45° to the right - Movable guard ensures optimal safety when cutting - Control handle with safety switch - Vice with counter vice, quick release and anti-burr jaws - Lateral material support arm with roller - Vise can be moved longitudinally and thus for longitudinal cuts and for suitable for slots 0° (round) solid material 55 mm 0° (round) tube 90 mm 0° (square) tube 80 x 80 mm 0° (rectangular) tube 115 x 70 mm -45° (round) solid material 50 mm -45° (round) tube 80 mm -45° (square) tube 70 x 70 mm -45° (rectangular) tube 70 x 70 mm +45° (round) solid material 50 mm +45° (round) tube 80 mm +45° (square) tube 70 x 70 mm +45° (rectangular) tube 70 x 70 mm

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Nkodpstpnplofx Ab Usw Technical data: - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Condition: new, Surface grinding machine Make METALLKRAFT Nodpfxjd Rhpqs Ab Uokw Model FSM 2550 Condition: New machine with warranty Technical Data: Table size(magnetic plate): 250 x 500mm Maximum grinding surface: 265 x 540mm Maximum distance spindle-table: 500mm Pitch handwheel for Z-axis: 0,02mm (5mm per revolution) Automatic feed Z-axis: 0,5 - 20mm Handwheel pitch for Y-axis: 0.01mm (2mm per revolution) Spindle speed: 2900rpm Motor power spindle: 1,5 kW / 400V Motor power hydraulic unit: 0,75 kW / 400V feed speed X-axis: 5 - 25m/min Motor power cross feed (Z): 0,15 kW / 400V Speed rapid traverse Y-axis: 250mm/min Maximum grinding wheel diameter: 205 x 20 x 31,7mm Dimensions: 2250 x 1400 x 1800mm Weight: 1350,00kg(net) Standard equipment: solid and stress relieved machine body made of grey cast iron X- and Z-axis with V- and flat guideways and high quality Turcite-B guideways Spindle with class P4 tapered roller bearing guarantee a concentricity of 2μ Manual adjustment in all axes by means of large handwheels with vernier electromagnetic clamping plate including automatic demagnetization function automatic, motorized feed in the transverse axis(Z) regulation of the feed in the Z-axis via two potentiometers (coarse feed / fine feed) End position determination in the Z-axis via adjustable end stops automatic, hydraulic feed in the longitudinal axis(X) with adjustable stroke Regulation of the feed speed

Condition: used, This Metallkraft workshop press, type: WPP 50 M, is being auctioned in our industrial auction / machinery auction – insolvency auction for metalworking: Elumatec, vehicles, trailers, tools, sea containers, workshop equipment, and office equipment, online. Nksdpsyxd Upjfx Ab Uow

Condition: good (used), Year of construction: 2018, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge Njdpeyu U Dlofx Ab Uskw * stepless adjustment range * adjustment from behind - by handwheel * including mm scale * max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop with mm-scale - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control)

Year of construction: 2020, condition: ready for operation (used), overall weight: 6,200 kg, pressing force: 10 t, Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details. • Stroke: 270 mm • Motor power: 11 kW • Voltage: 400 V / 3 phases • Oil tank capacity: 150 liters • Backgauge (X-axis): 650 mm • R-axis travel: 200 mm Nksdpfxsyr Hl Aj Ab Ujw Technical Specification Bending Length 2600 mm

Year of construction: 2022, condition: ready for operation (used), overall weight: 12,500 kg, total height: 2,300 mm, This Metallkraft HTBS PRO 3113 was manufactured in 2022. It's a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine. Additional equipment • CNC-controlled CybTouch 8 touchscreen for precise and easy settings • Back gauge with ball screw and linear guide, CNC-controlled adjustable in the range of 5–1000 mm Njdpfeyalipjx Ab Uokw • Motorized cutting gap and angle adjustment directly via the control panel • 15 clamping units with rubber pads to prevent sheet slipping • Built-in LED lighting to illuminate the cutting zone • Safety elements include rear light curtain and fold-up plexiglass finger guard • High-quality, resharpenable knives (upper knife 2-piece, lower knife 4-piece) • Mobile foot pedal with emergency stop switch • Built-in ball table for easy sheet movement • Electrical components: Siemens and Mitsubishi // Hydraulic components: Hydac, Hoerbiger Machine Benefits Technical Machine Benefits • Table dimensions: length: 3610 mm, depth: 635 mm, height: 805 mm Dimensions Machine Depth 4100 mm

Year of construction: 2022, condition: ready for operation (used), This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine. Application Types Bending Njdex D Rphjpfx Ab Ujkw

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.03 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, Including 7.5 kW extraction system Compact, space-saving, and affordable fiber laser Manually extendable work table - electrically assisted Work table safety door opens and closes electrically Sturdy welded construction for high rigidity, precision, and durability Machine bed shielded by manganese steel plates to protect against heat, sparks, and slag Effective cutting fume extraction; controlled flaps focus the extraction power on the current work area Raycus laser source with autofocus laser head from HSG (optional laser source from IPG) Laser head with faster focusing speed than comparable units, resulting in higher penetration speeds with thicker materials Main lens protected by an easily replaceable double protective lens Nedpfowf H Avsx Ab Uekw Efficient water cooling of the laser head Power stabilizer to compensate for voltage fluctuations, thus ensuring consistent cutting quality Very easy handling of the machine and the user-friendly software Control software with numerous templates for programming simple components Material storage management User-friendly nesting software with many features Camera-monitored laser work area with transmission to screen

Condition: excellent (used), Year of construction: 2023, tube diameter 42.0 x 3.0 STAHL mm tube diameter 30.0 x 2.0 EDELST mm bending angle max. 180 ° bending radius max. 100 mm bending speed 2.0 U/min. Control NC voltage 400 V total power requirement 0.55 kW weight of the machine ca. 115 kg Current new price approx. 4.200 Euro Nkjdpfex U El Isx Ab Ujw Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless * up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base

Condition: new, plate thickness 6 mm pressure 12 t cutting range Breite x Länge 200 mm no. of strokes 15 Hub/min cutting angle 30 - 140 ° total power requirement 4 kW weight of the machine ca. 1,02 t Nkjdpfx Aell Dbujb Uow dimensions of the machine ca. 1065 x 900 x 1210 mm

Condition: as good as new (ex-display), Year of construction: 2018, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm weight of the machine ca. 50 kg dimensions of the machine ca. 560 x 220 x 500 mm Manual bead bending machine Description: Nksdjraqhxjpfx Ab Usw - Heavy-duty and stable cast iron construction - Adjustable lower shaft - Special steel shafts - Built in accordance with CE standards

Condition: new, sheet width 1050 mm plate thickness 1,5 mm distance between columns -- mm weight of the machine ca. 280 kg dimensions of the machine ca. 1300 x 750 x 1515 mm Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm Nkodpeudc Izofx Ab Ujw - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm

Condition: new, saw blade diameter 355 mm capacity 90 degrees: round 130 mm Nksdpfsxabypsx Ab Usw capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 170 x 110 mm turning speeds 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees - 45 / + 0 total power requirement 3.5 kW weight of the machine ca. 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts - vice with quick adjustment - large LED work light on the underside of the handle * to illuminate the work area - secure stand thanks to non-slip hard rubber feet - with spindle lock for quick saw blade changes - incl. 1x saw blade for steel 355x25.4x2.4mm Z66

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Nksdpfexizanex Ab Uow

Condition: new, Year of construction: 2026, KRBS 101 Combined pipe, profile and belt grinder Nkedjcnz Ayepfx Ab Ujw Convenient operation due to easily adjustable clamping device The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Powerful motor Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench 1 x sanding roller 42 mm Model KRBS 101 Article no. 3921001 Technical data Mains connection 400 V Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Njdevk Scgepfx Ab Ujkw Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, Year of construction: 2026, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data Nkodpocnxc Rofx Ab Ujw working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm