sheet width: mm
plate thickness: min/max.: 6/40 mm
total power requirement: 2,2 kW
dimension machine [...]: 500 x 350 x 580 mm
machine weight approx.: 65 kg
welding - chamfer mmilling machine
welded on a pipe frame base, transportable
- chamfer angle from 22,5° up to 45°
- max. width of mill chamfer 12mm
- dimension of the applicated material: plate = thickness min./max. 6/40mm and width min. 55mm, such as inside pipes Ø min. 100mm
Bevel milling machine Gecam type quicker sheet thickness from 6 mm to 40 mm, weight: 78 kg cutting angle of 15-50 degrees with 2 zusaetzklichen cutters as a substitute will be sold only to entrepreneurs in the sense of § 14 BGB
plate thickness 50 mm
bevelling-angle 35 Grad
sheet thickness - max. bis 50 mm
bevelling-depth in steel 40 kg/m² 13 mm
bevelling-depth VA-steel 10 mm
engine output 1,5 kW
weight of the machine ca. 400 kg
dimensions of the machine ca. 0,75 x 0,8 x 1,3 m
Electric 380 Volt
Machine works 13 mm bevelling, if the plate is no bigger than 40 kp/mm2.
bevelling-angle is fixed and constant at 35 degree.
Machine dealer with own stock of 2500 m² and certification of the database
chamfer width 1 to 20 mm - stepless adjustable
chamfer angle 15 to 60° - steplessly adjustable
forward feed manual
speed 2,850 rpm
electrical data 220 V / 1.1 KW
with turning plates for replacement purposes, tools in
space requirements length - 455 x depth - 365 x height - 270
weight approx. 25 kg more
Clamping range:-Tube inner Ø min./max. 25/152 mm
Workspace pipe outer Ø of min/max 27/160 mm
Pipe wall thickness depending on the pipe diameter up to: 25 mm
Spindle stroke: 15 mm
Pneumatic motor, power at 6 bar: 740 W
Operating pressure: 6-7 bar
Air consumption: 0.96 m ³/min
Weight: 10.3 kg
sheet width 9999 mm
plate thickness 10 mm
total power requirement kW
weight of the machine ca. 0,48 t
dimensions of the machine ca. 0,90 x 0,80 x 1,35 m
Inspectable under power at our warehouse.
Beveller Pullmax X 93, engine Nr: 61790-20
Max sheet thickness up to 50 mm
min straight edge 3 mm
Bevel angle of 25-55 °
Working speed range from 1.5-3.1 m / min
Drive 400 V
Space approx. B 1,400 X 1,200 x H 1.550 mm
Weight ca. 1, 300 kg
with 4 cutting wheels!
We sell the machine, because we use them too little.
Machine is ready and functional.
Only known deficiency: cover emergency off switch broken, but has no influence on the function.
The machine can be pr... more
-Plate thickness with connecting piece 160 mm
-Helix angle standard 20 degrees; 30°; 37.5 °; 45 °
-Helix angle with special scraper 55 °
-Maximum length of Helix steel 400 n / mm² 15 mm
-Maximum length of Helix steel 600N / MM2 9 mm
-Maximum length of Helix steel 800N / mm2 6 mm
-And pipe processing from 30 mm inner diameter
-Internal cut-outs with a diameter of 160 mm
-Working speed approx. 1.5 m / min
-Strokes approximately 250 1/min
-Drive: 400 V / 2000... more
The hand milling machine MS-8 is a light milling machine that is very stable due to their design. Due to their high runout accuracy, you reach a very good milling result with her. She is, 8mm cutting width and RADIUS 3 mm and 4 mm, an optimal and long-lasting edge milling machine...
making you their cost in terms of edge processing and/or rounding edges can significantly reduce. Due to the low weight, easy operation and excellent milling results you and your employees with this machine can ed... more
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
Didn't find what you were looking for? Please contact our partners for this category:
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.