Used Fixed Bezel for sale (5,051)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Fodpsz Hwvdjfx Al Uegh Machine operating hours: 54,796 h Spindle hours: 23,462 h EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Fgedez Hb S Aspfx Al Uoh Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth 24x Pallets Quenching Line Tooling

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 600, number of blades: 20, rotational speed (max.): 1,475 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main engine power: 22 kW Speed: 1,475 rpm Hydraulic unit power: 3 kW Oil tank capacity: 48 l Fjdjz Ebbbopfx Al Uogh Number of axles: 1 Opening width: 600 mm Opening length: 250 mm Screen perforation: 15 mm Number of fixed blades: 20+ MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,350 x 2,400 mm Number of transport packages: 3 Note: The magnet is not included in the offer.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,649 h, functionality: fully functional, machine/vehicle number: 101161, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 920 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 14,000 rpm, A new spindle was installed one year ago! TECHNICAL DETAILS Travel in X-axis: 1,020 mm Travel in Y-axis: 620 mm Travel in Z-axis: 920 mm Swivel range of B-axis: +30° to -120° Spindle speed range: 1–14,000 rpm Tool holder: SK 40 Tool magazine capacity: 40 Fodpfx Aoz Hwutsl Usgh Clamping surface of rotary table: 1,200 × 610 mm Diameter of rotary table: 500 mm MACHINE DETAILS CNC control: Heidenhain iTNC 530 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Power: 75 kVA Rated current: 100 A Main fuse: 120 A Machine weight: 8,740 kg Operating hours (according to counter) Spindle running time: 10,649 h Program running time: 11,159 h Machine operating hours: 24,317 h Control operating hours: 26,901 h EQUIPMENT Fixed rotary table NC rotary table WALTER B-axis swivel head with torque drive Vertical tool changer 3D measuring probe Heidenhain Electronic handwheel Fixed full protective enclosure with interior lighting Internal cooling system Coolant system Oil mist extraction Chip conveyor Operating manual

Condition: used, Year of construction: 1966, turning diameter over bed 330 mm turning dia. in gap 400 mm turning length 600 mm centre distance 750 mm Fodpfxsxrg Ato Al Uogh spindle turning speed range 20 - 1000 U/min spindle bore 25 mm 3-jaw chuck Röhm, Ø 200 mm dimensions of the machine ca. 2000 x 800 x 1500 mm weight of the machine ca. 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm Fodpfjupxctex Al Usgh turning speeds 125 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.

Condition: new, turning length 2000 mm centre height 330 mm swing diameter over bed slide 660 mm turning dia. in gap 900 mm swing diameter over slide rest 460 mm spindle bore 105 mm turning speeds 25 - 1600 U/min bed width 400 mm spindle taper 55029 D 1-8 taper in tailstock 5 MK quill travel 235 mm total power requirement 7,5 kW weight of the machine ca. 2900 kg. range L-W-H 3630 x 1200 x 1520 mm Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly Fgodpoxabpqsfx Al Uoh - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Interchangeable wheels - reducing sleeve - Chip back wall - Cable routing via energy chain - Operating tool

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Fedpovbcydjfx Al Uegh Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Fodezn Aymjpfx Al Usgh Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: used, Year of construction: 2017, Citizen Miyano BNA-42MSY2 Fixed Headstock Lathe 7 Axis Machine with Cincom/Citizen CNC Control, Twin Spindle Collet Chucks, 8 Position Tool Turret all Driven, Max Work Piece Diameter 42mm, Main Spindle Speed 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher & Conveyor, LNS Turbo MH500 Swarf Conveyor. S/No. DL0110 (08/2017) 3000kg, Iemca Boss 552-HD 5 meter Barfeed. S/No. 021805GA03 (2018). Selection of Driven & Static Tooling for BNA42. Country of Origin: Japan Fjdsz Arncepfx Al Uogh Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 2005, operating hours: 2,120 h, condition: good (used), functionality: fully functional, blade length: 650mm with opposed shear cutting, 3 rotating blades, 2 counter-blades, 55kW motor, grinding extraction system with flexible screw conveyor (not included), front opening, control panel, soundproofing, spare set of new blades. Fgjdpezbqyvefx Al Ush

Condition: new, power: 350 kW (475.87 HP), fuel type: electric, axle configuration: 2 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Options: * CRYSTAL WHITE * DAF Digital Vision System * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windshield with sun protection film * External sun visor * Two LED headlights for the rear of the cab * Rear view camera with preparation for 2nd camera * DAF Corner View * High beam assistant * Fixed cab steps * Front chassis version: Aero floor panel * Air-suspended cab * XG+ cab * Headlight beam pattern for right-hand traffic * Headlights without height adjustment * LED skylights * Chrome trim on the front of the cab, side walls: darkened * LED headlights, cornering and fog lights * LED daytime running lights * Side fenders, foldable on both sides * Adjustable roof spoiler, for XG+ cab * Side panel: complete * Chassis color: Black * Roof spoiler color: Crystal White * Side fender color: Crystal White * DDVS housing color: Crystal White * CRYSTAL WHITE * Color of headlight bezel: Crystal White * Color of bumper: Crystal White * Lower cab step: Crystal White * Color of side panels: Crystal White * Steering wheel, leather * Driver's seat: Xtra Leather Air * Passenger seat: Xtra Leather Air * Door panel: Leather * Cab interior trim: Natura * Passenger seat, swivel pedestal * Mattress with mattress topper for DAF Relax Bed * Curtains with partition curtain * Refrigerator and drawer * Dashboard design: Vision * Auxiliary power supply: Standard + 2x 40 A * LED interior lighting: Exclusive * ECAS remote control with extended functions * Stationary air conditioning, integrated * Color of interior trim: Exclusive * Cab wall paneling: textile * Roof hatch with electric operation * Preparation for air compressor * Driver's seat, fixed pedestal * Upper sleeper bunk * Automatic cab climate control * Safety net for upper sleeper bunk/storage compartment * Armrests on both sides of the driver's seat * Armrests on both sides of the passenger seat * Storage compartment with drawer in the center console * Stationary heater with waste heat pump and timer * Speakers: Exclusive * Predictive Cruise Control * Digital tachograph, VDO version G2V2A * Speed limiter: 90 km/h * PACCAR Connect 10-year subscription * Tachograph calibration * Antennas: Radio, 2x cellular, GNSS, Extra: CB * DAF Truck Navigation * Infotainment including DAF Truck Navigation * Wireless charger * Adaptive Cruise Control with FCW and AEBS-3 * Preparation for toll system * FMS connector, extended and prepared * Driver Performance Assistant * Rear warning system * Lane change warning system * Emergency hammer * Hill start assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness and Distraction Detection * Main chassis switch * Standard immobilizer * Axle load monitoring * Front leaf suspension: medium * Front: 9,00 t, parabolic, 183N * Front axle 1, 9,000 kg, load index 160 * Rear axle load capacity 13,00 t * Stabilink rear axle suspension * One ride height position, standard height * Rear: Air suspension SR1344 Fodpfxoz Hg Dke Al Uogh * Rear axle 1, 13000 kg, load index 149 * Front axles: 385/55R22.5 * Alu Alcoa Dura-Bright 32 mm * F1,385/55R22.5GO EQMSU 160/158 L Steering ABA 3P * Wheel trim rings, silver-grey * Goodyear * Tire pressure monitoring system * Driven rear axle(s): 315/70 R22.5 * R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P * Urge-to-move * Rear axle ratio 2,38 * Mechanical

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg Fgedpfx Aljk Egrpo Ujh dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Fgodpfez Hxclsx Al Ujh Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: used, machine/vehicle number: 008710, Max. machining width: 1300 mm Working Table: Fixed pass height Vacuum feed belt: yes Fgodpfx Aoztat Ujl Ush No. Operating units: 3 Nr

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table length: 4,500 mm, total height: 3,400 mm, total width: 5,390 mm, total length: 11,100 mm, workpiece weight (max.): 9,000 kg, overall weight: 22,500 kg, spindle motor power: 22,000 W, spindle nose: ISO 50, Fixed-bed milling machine built by Nicolás Correa in 2002, fitted with a Heidenhain TNC 426 CNC control and electronic handwheel. Working table measuring 4,500 × 1,100 mm with eight T-slots, 22 mm wide and spaced approximately 125 mm apart. Maximum permissible table load of 9,000 kg. Axis travels of 4,000 mm in X, 1,250 mm in Y and 1,500 mm in Z. Universal milling head with manual positioning, hydraulic tool clamping and ISO 50 spindle taper. Main spindle rated at 22 kW with infinitely variable speed control across a range of 20 to 3,000 rpm. Cutting feed from 2 to 5,000 mm/min; rapid traverse of 15,000 mm/min on the X axis and 10,000 mm/min on the Y and Z axes. Compensation on the Y and Z axes, through-spindle coolant supply and provision for a fourth axis. The machine is supplied with a shared fourth axis, 400 mm in diameter. CE marked. Fgedszw Hgvspfx Al Ueh Condition: axis movement is correct, with no unusual noise or vibration. Measured deviation of approximately 0.15 mm. The milling head is functional and shows slight play. The machine has been kept under basic maintenance and is in working industrial condition. Approximate weight between 22,500 and 24,000 kg. Approximate overall dimensions of 11,100 × 5,390 × 3,400 mm.

Condition: used, Zucchelli 9 Screwdrivers in stock to fix or use for spare parts. Fgsdpfx Aozz Rn Ejl Ujh

Condition: used, mileage: 345,000 km, Year of construction: 2010, Equipment: crane, 2-axle truck, 75 hp, fitted with a fixed body measuring 4.20x2.33 m, payload capacity of 2200 kg, PM series 4 crane with 4 hydraulic extensions, automatic transmission, Euro 5 compliant. Fedsvnukzopfx Al Ujgh Note: Please be aware that the vehicle description is indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data.

Condition: used, mileage: 313,000 km, Year of construction: 2021, Three-axle truck, 260 hp, equipped with a fixed body measuring 6.40 x 2.55 m, payload of 13,000 kg, Bonfiglioli crane, series 15,000 with 4 hydraulic extensions and remote control, automatic transmission, retarder, sleeper cab, towable, Euro 6 compliant. Fedpszz Igrjfx Al Uegh Note: Please be aware that the vehicle description is indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data.

Condition: used, mileage: 1,057,000 km, Year of construction: 2000, Three-axle truck, 260 hp, equipped with a fixed body measuring 7.90 x 2.55 m and a rear hydraulic ramp, payload capacity of 12,050 kg, Bonfiglioli series 13,500 crane with 3 telescopic sections and remote control. Note: Please be advised that the vehicle description is indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data. Fgjdpfx Aszyccfol Ujh

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, This stationary crushing and screening plant is designed to meet the needs of asphalt and concrete aggregates with high capacity and superior quality. With a production capacity of 500 tons per hour, the plant stands out in terms of both efficiency and product quality thanks to its modern engineering approach and optimized process flow. The feeder bunker and intermediate screen system in the plant's feeding unit ensure the controlled and balanced transfer of raw material to the crushing line. This ensures a continuous and stable production flow throughout the system, maximizing equipment performance. The CLK 130 jaw crusher, with its high strength and powerful crushing capability, plays a critical role in the initial stage of the process by effectively reducing large-sized material. Supported by an under-jaw vibro feeder, the system regulates the material flow, providing homogeneous feeding to the secondary impact crusher group. The positioning of all these units on a single platform and with a beltless flow principle saves space and offers ease of maintenance and operation. This innovative approach also contributes to reducing operating costs by increasing energy efficiency. The TK150 tertiary crusher and VSI 900 vertical shaft crushers, located in the advanced crushing stage of the plant, enable the production of cubic and high-quality aggregates, which are particularly needed in asphalt and concrete production. Thanks to this equipment, the particle shape and granulometry of the product are obtained in accordance with international standards, and the final product quality is significantly increased. The three horizontal screens in the system enable the precise classification of aggregates of different sizes, offering a variety of products to meet customer needs. Thanks to the screening efficiency, maximum product recovery is achieved with minimum waste, and the overall performance of the plant is optimized. This high-capacity crushing and screening plant, with its robust equipment structure, innovative design approach, and high-quality-oriented production philosophy, will make significant contributions to the region's infrastructure projects. Standing out as a sustainable, economical, and high-performance solution in both asphalt and concrete aggregate production, the plant fully meets the requirements of the modern mining and construction sectors. MAIN EQUIPMENT OF THE PLANT: 50 M3 FEEDING BUNKER PRE-SCREEN CLK-130 JAW CRUSHER 1300x1100 MM Fgjdpozb Uxvofx Al Uoh HDK-1115 IMPACT CRUSHER 1200X1500 MM VSI-900 VERTICAL SHAFT CRUSHER CLOSED ROTOR TK-150 TERTIARY CRUSHER 1200X1500 MM HORIZONTAL SCREENS STOCK BUNKERS CONVEYOR BELTS CONTROL CABINET AND AUTOMATION SYSTEM

Condition: used, functionality: fully functional, mileage: 345,800 km, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, emission class: euro4, Year of construction: 2007, Equipment: crane, IVECO DAILY 65C17 Year 2007 DIESEL / Euro 4 345,800 km Manual transmission / Engine capacity 2,998 cc / 130 kW Gross Vehicle Weight (GVW): 6.5 t Payload: 2,500 kg / Wheelbase: 4,350 mm Accessories: - Compressor for air suspension Body: - Fixed dropside body: 4,280x2,350 mm / floor height: 940 mm - Rear-mounted crane FASSI F50 A.22 Fgedpfxexxl Tqo Al Ush * 2 manual extensions

Condition: used, Year of construction: 1990, Fixed Bed Milling Machine CORREA A25/25 Travel X: 2500 mm Travel Y: 1200 mm Travel Z: 1000 mm Fjdpfx Alez Nxx Tj Uegh CNC HEIDENHAIN TNC 355 Spindle: SA 50 Spindle motor: 30 CV Spindle speed: from 2 to 3000 RPM Table size: 3000 x 1000 mm Year of construction: 1990 Maxi eligible load on table: 7 T Manual Swivel Head Voltage: 380 V Dimensions (L x W x H): 5000 x 3000 x 3000 mm Weight: 16,5 T

Condition: used, Year of construction: 2004, functionality: fully functional, cutting length (max.): 8 mm, Equipment: cabin, Complete Artiglio log saw with Eagle 1100/I carriage. It has been maintained by Artiglio in 2018. It is in excellent condition. Fedpfxsv Sr U Ee Al Ujgh

Condition: used, machine/vehicle number: 9486, Year of construction: 2013, operating hours: 3,694 h, load capacity: 3,800 kg, lifting height: 13,000 mm, fork length: 1,400 mm, overall weight: 9,100 kg, Hubhöhe: 13 m Tragkraft: 3.800 kg Gesamtgewicht: 9.100 kg Antrieb: Diesel 4x4x4 Betriebsstunden 3694 h lt. Zähler abgelesen Einzelkabine mit 1 Sitz Antrieb über 4 Zylinder Perkins Dieselmotor Fedpfx Alszca Ewo Uogh Max. Höchstgeschwindigkeit 20 km/h Maximale Ausladung ca. 8,7m 1 Teleskop- Stahlbauweise Reifengröße 405/70-R20, Profil 15-17 mm, Radstand 2750 mm, Radformel 4x4x4 Gesamtmaße in Länge x Breite x Höhe 5280 x 2250 x 2400 mm Front- Abstützung Palettengabel, Zinkenlänge 1.400 mm Schnellwechseleinrichtung Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben