Lathe-conventional-electronic

BERNARDO TITAN 660 - 2000

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Njdpfofbbx Rjx Af Ijwb Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Best cutting performance even during face turning For stiffening the bed guide and for minimizing

Year of construction: 2015, condition: used, Dimensions (L/W/H) 700x655x1400 mm Filter capacity / m² Nwodpegr Rkxofx Af Iob Number of filters 1 St. Number of dust containers 1 St. Weight 140 kg

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Center height: 260 mm Center distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Njdpfx Aoctutmef Ijwb Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 Nwedsucgr Iepfx Af Ijb - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm Nwedpfxjwz Rywe Af Ieb CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW Nedpewa I Shjfx Af Iowb weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: excellent (used), Year of construction: 2017, Max. turning length: 1,214 mm Max. turning diameter: 420 mm Chuck size: 305 mm Max. swing over bed: 700 mm Travel distances - X-axis: 280 mm - Y-axis: 120 mm - Z-axis: 1,390 mm Rapid traverse - Rapid traverse X/Y/Z: 20 / 10 / 24 m/min Spindle - Bar capacity: 89 mm - Max. speed: 2,500 rpm - Drive power: 22 / 18.5 kW - Torque: 1,050 / 883.8 Nm Turret - Tool stations: 12 - Driven tool stations: 12 - Tool holder: BMT-65 Accessories: Nsdpfx Afsw Tcvme Iewb • Box ways • C-axis • Y-axis • Air blow gun • Steady rest base • Manual steady rest, manufacturer RICHTER • Chip conveyor • Automatic tailstock and quill • Work light • Coolant tank capacity: 240 liters Connected load: 55 kVA Weight: approx. 7,800 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-640, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 900 mm, spindle motor power: 32 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED DOOSAN VCF 850L-II traveling column machining center with HEIDENHAIN TNC-640 CNC Nsdpew Dcl Refx Af Iswb

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Nwedpfx Ajxv A E Sjf Iob

Condition: used, Year of construction: 2010, pillar-mounted slewing crane: mobil arm length ca. 2500 mm weight of the machine ca. 4 t weight max. in kg 125 kg bucket net weight 430 kg bucket filling weight mindestens 416 kg Nwodpfx Afjmt Rpwe Iob bucket - total weight mindestens 846 kg max. wheel load 391 kg max. support load 544 kg .