Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

Center Lathe MEUSER M IV L / Digital

Bünde, GermanyGermany dealership location
6460 km
used
turning diameter over bed 620 mm turning diameter over slide rest 232 mm turning length 1000 mm centre height 310 mm spindle bore 77 mm spindle turning speed range 12 von 20-900 U/min Drive 9,2 kW weight of the machine ca. 3 t dimensions of the machine ca. 3,04 x 1 x 1,4 m Electric 380 Volt Hardened guidance pathes 3 jaw chuck Forkardt F 315 Multifix-steel holder Fixed steady B Digital readout Heidenhain 3 Achsen Cooling equipment Dmrquflvg Machine dealer with own stock of 2500 m... more
5

Center Lathe LEGOOR 300 x 2.000

Stockstadt, GermanyGermany dealership location
6564 km
1969
used
turning diameter over bed:620 mm turning diameter over slide rest:390 mm turning length:2000 mm turning dia. in gap:850 mm spindle bore:104 mm H9waf9pqi bed width:420 mm turning speed range:20 - 1.500 1/min spindle taper:CAM-LOCK D.1-8" main drive:11 kW total power requirement:15 kW weight of the machine ca.:3.750 kg spindle motor: kW Multifix tool holder C model: steady rest:250 mm 3-jaw chuck diameter:300 mm 4-jaw face plate diameter:450 mm complete sedimentation cooling equipment: compl. ... more
4

Center Lathe GORNATI Legoor 350

Dreieich, GermanyGermany dealership location
6568 km
1972
used
turning diameter over bed 700 mm Cnzyl8ds turning diameter over slide rest 490 mm turning length 2000 mm center height over bed 350 mm turning diameter in the gap 990 mm centre distance 2000 mm bed width 415 mm spindle bore 107 mm turning speed range 13-1000 U/min power requirement 11 kW 3-jaw-chuck diameter 315 mm quick change toolholder MULTIFIX TYP C taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 300 mm coolant voltage 380 V total power requirement 11 kW weight of the mach... more
5
Engine type: conventional lathe Make: TOS Type: SUI 63 year: ca. 1990 Bkxkf7x Control type: manual Location: United States Shipping time: immediately / on request Technical details Swing over carriage mm: 630 mm Turning length mm: 4,000 mm Swing over cross slide mm: 350 mm Spindle passage mm: 70 mm Control: Manual 2-axis digital display TURN VISION Main drive engine kW: approximately 17 kW Machine weight kg: 6,500 kg Accessories: Multifix steel holder 3 - jaw Chuck 4 - jaw Chu... more
5

Center Lathe OERLIKON DM 3

St. Ingbert, GermanyGermany dealership location
6503 km
1975
used
faceplate diameter: mm turning diameter over slide rest:480 mm turning length:5200 mm max. turning diameter:920 mm Cqnrkbs2 spindle passage:50 mm weight of the machine ca.:7 t dimensions of the machine ca.:10,0 x 1,5 x 1,5 m Speed max:980 U/min Speed min.:17 U/min. total power requirement:13 kW more
9

Lathe TOS SUI 63

Nordrhein-Westfalen, DeutschlandGermany
6437 km
1990
ready for operation (used)
Engine type: conventional lathe Make: TOS Type: SUI 63-80 / / 4000 year: ca. 1990 Control type: manual Location: United States Shipping time: immediately / on request Cargo base: From site / Foundation Price / euro / net: on request Technical details Yrspt8 Swing over carriage mm: 630 mm Turning length mm: 4,000 mm Swing over cross slide mm: 350 mm Spindle passage mm: 70 mm Control: Manual 2-axis digital display TURN VISION Main drive engine kW: approximately 17 kW Machine weight... more
5
Lathe, lathe, lathe and guidance Turning length 1650 mm rotating Ø bed 440 mm rotating Ø support 280 mm spindle hole 52 mm three-jaw Chuck 200 mm motor 10 kW Multifix steel holder Bahx0od9kx Recording live MK4 Mmm dimensions 2865/1000/H1530 Weight kg more
6

Heavy Duty Lathe STANKOIMPORT MOSKAU 1M635

Velen-Ramsdorf, GermanyGermany dealership location
6370 km
used
turning diameter over bed 700 mm turning diameter over slide rest 360 mm turning length 3000 mm spindle bore 72 mm Ciqzsjd spindle speed: 10 - 1250 U/min tailstock quill taper MT MK 5 quill adjustment 300 mm total power requirement kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,3 x 1,7 x 1,8 m with digtal read out system in y+x axis more
4

Center Lathe GORNATI Legoor 350

Dreieich, GermanyGermany dealership location
6568 km
1972
used
turning diameter over bed 700 mm turning diameter over slide rest 470 mm turning length 3000 mm center height over bed 350 mm turning diameter in the gap 990 mm centre distance 3000 mm bed width 500 mm digital readout 2 Achsen TRAK Ccxdqyh3 spindle bore 104 mm turning speed range 20-1500 U/min power requirement 15 kW 3-jaw-chuck diameter 400 mm quick change toolholder taper in tailstock-quill MK 6 dia. of quill 90 mm quill stroke 300 mm coolant voltage 400 V total power requirement 15 kW w... more
3

Sliding bed lathe TACCHI HS 1000

Willich, GermanyGermany dealership location
6368 km
used
swing diameter 1000 mm spindle passage 105 mm Turning length 4500 mm Gcza7omqs turning diameter over slide rest 700 mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m more


Center lat...
daily

New machines via email!

Stay updated!
10
Manufacturer: WMW NILES lathe DLZ 630 Condition: used Turning diameter over bed: 630 mm Feed: quer: 0,018-1,25 mm/U Hollow: 70 mm Centre height: 290 mm Spindle speed: 22,5 – 1120 / 18 step U/min Turning length: 2000 mm Total power requirement: 15,0 kW Turning diameter over bed: 630 mm Weight of the machine ca.: 4,2 t Bcand2xwte Transport dimensions lxwxh: 4,5×1,35×1,5 m Turning diameter over slide: 340 mm more
5
Lathe, lathe, lathe and guidance Turning length 850 mm rotating Ø bed 360 mm rotating Ø without bridge 420 mm Rotating ø support 230 mm spindle hole 52 mm Röhm three-jaw Chuck 200 mm Multifix steel holder Motor 3 kW Recording live MK4 Water cooling Chuck guard Dimensions 2160/1070/H1550 mm H8kbbr7 Weight 1300 kg more
10
1 lathe manufacturer: VDF Type: V3 1972. Turning diameter: approx. 640 mm Bkxlq3x Turning length: 4000 mm with accessories more
11
Very nice lathe in a good size. Centre height: 315 mm Distance between chuck and point: 2000 mm Centre bore: Ø90 mm Feed and rapidfeed on X and Y axis. Spindle for threading. Cout3g7m Accessories: 3-jaw chuck Ø380 incl. 2 sets of reversible jaws. 4-jaw chuck Ø400 mm Steady rest Ø380 mm Steady rest Ø190 mm Following rest Ø105 mm Taper attachement Chip tray with internal coolingwater tank Coolingwater pump Machine light I can sell and install Newall 2 or 3 axis DRO for ver... more
6
turning diameter over bed 1900 mm 3hhdl7qcx turning diameter over slide rest 1550 mm turning length 7000 mm speed 0,6 - 22,4 (16x) U/min workpiece weight 30000 kg faceplate 900 mm total power requirement 45/68 kW weight of the machine ca. t dimensions of the machine ca. m more
5
Lathe Saeed UD 630 Built in 1969 Machine number: 16615 Round Ø bed 650mm Round Ø over slide 420mm Top width 1000 mm Three-jaw Chuck Ø315 Multifix Additional gear for slow speeds More specifications: see machine card the following accessories are present on the machine: Copy Setup Faceplate 2. feed Bezel Bcsnwgbbfz The machine has the dimensions approx. 3 m x 1.2 m x 1.4 m and a weight of approx. 4,000 kg. The machine is in perfect condition and works perfectly. For ... more
2

Center Lathe DMTG CDS 6276C x 3000

Stockstadt, GermanyGermany dealership location
6564 km
2008
used
turning diameter over bed:760 mm turning diameter over slide rest:540 mm turning length:3000 mm turning dia. in gap:965 mm length of gap:250 mm bed width:394 mm spindle taper:D1-8 spindle bore:105 mm spindle turning speed range:26-1700 U/min transmission ratio:16 Stck. metrical thread cutting:0.35-80 mm/U threading WHITWORTH:7/16-80 TPI diameter of quill:75 mm longitudinal feed:0,044-1,48 mm/U cross feed:0,022-0,74 mm/U taper of spindle bore:110/1:20 MK range of module thread:0,2-40 mm range of... more
5
Lathe, lathe, Center and lathe turning length 1500 mm Turning diameter over bed 680/900 mm Turning diameter over support 350 mm Lining with JAWS Lh9hv Spindle bore 65 mm Live recording MK5 Four-way tool post 3550/2000/H1600 dimensions mm Weight approx. 2500 kg more
4

VDF STRAIGHT BED CENTER LATHE

Usti Nad Labem, Czech RepublicCzech Republic dealership location
6873 km
1975
good (used)
Between centers:3000mm Ptmh0m Max swing : 670 mm more
3

Center Lathe VDF - HEIDENREICH & HARBECK V 630 R x 3000

Mönchengladbach, GermanyGermany dealership location
6371 km
1976
used
turning diameter over bed:640 mm turning diameter over slide rest:380 mm turning length:3000 mm centre height:315 mm main drive motor:11 kW max. workpiece weight between centres:1600 kg hollow:65 mm turning speed range:9 - 1800 U/min total power requirement:16 kW weight of the machine ca.:4 t Teekbuglp dimensions of the machine ca.:5,0 x 1,25 x 1,65 mm digital readout Acu Rite 3-point steady rest dia. 320 mm 3-jaw chuck 320 mm, MULTIFIX quick change tool holder with various inserts more
6

Sliding bed lathe HEIDENREICH & HARBECK V800SB

Willich, GermanyGermany dealership location
6368 km
1978
used
swing diameter 790 mm turning length 8700 mm faceplate 1200 mm bed width 560 mm spindle passage 50 mm 3 jaw chuck Forckrath 630 mm digital readout 0 28-1120 U/min steady 400 mm steady 300 mm turning diameter over bed slide 515 turning dia. in gap 1600 mm workpiece weight 4000 kg total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Bbl37x0lrk more
4

Lathe Mexpol TBA 660 x 3000

Am Ritterskamp 6, 40885 Ratingen, DEGermany
6388 km
2014
excellent (used)
Servo Convention Elle lathe with active digital display. -Manual method of the axes x and z about mechanical hand wheels -x and z axis with ballscrew -Infinitely variable spindle speed, 3 gear stages -Continuous feed -Rapid traverse in the longitudinal and transverse Tip height 330 mm Circular bed 660 mm Circulation over bed slide 300 mm Centre distance 3000 mm ----- Spindle bore 104 mm Spindle mount DIN 55027/11 I... more
3

Center Lathe LEFEBVRE & MARTIN LM 700

Bühl, GermanyGermany dealership location
6593 km
1988
used
turning diameter over bed 700 mm turning diameter over slide rest 460 mm turning length 3000 mm centre height 355 mm spindle bore 80 mm total power requirement kW weight of the machine ca. 2,85 t dimensions 4,5 x 1,2 x 1,66 m 72emykzzd - with rapid feed in carriage - Accessories: 3-jaw chuck 300 mmø, MULTIFIX-tool post, DRO on 2 axis FAGOR, coolant more
5
Heavy lathe, lathe, lathe, Center and lathe Turning length 2200 mm rotating Ø bed 800 mm rotating Ø without bed 900 Rotating ø support bed width 460 mm 700 mm Spindle bore 90 mm faceplate 800 mm motor 31 kW Multifix steel holder Recording live MK6 Dimensions 5000/1900/H1550 mm Mt0q8c Weight 8000 kg more
2
Turning over bed: 630 mm Turning length: 2000 mm Bcsvrnqh3e Chuck diameter: 315 mm Spindle speed: 10-1000 rpm Motor power: 7.5 kW Machine dimensions: 4000 x 1200 mm Machine weight: 2960 kg Accessories: Steady rest more
6
We offer you, a used lathe manufacturer Meuser. Centre distance 3000 mm Total 4800mm year 1957 Weight 4 tons Bchnsqz8ij Guides are good. More info coming soon. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistakes in the descriptions and offerings are subject to chang... more
6
turning diameter over bed 630 mm turning diameter over slide rest 420 mm turning length 1600 mm Speed 9-1800 U/min. spindle passage mm Bbgy7rykda Rapid travel total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
4

Center Lathe VDF BOEHRINGER M 670

Schwäbisch Gmünd, GermanyGermany dealership location
6698 km
1966
used
turning diameter over bed 690 mm turning diameter over slide rest 465 mm turning length 8000 mm faceplate 630 mm 3-jaw-chuck diameter 400 mm total power requirement kW weight of the machine ca. 10 t dimensions of the machine ca. 11x1,5x1,5 m M0d79 Equipment: 2x steady some holders 1x faceplate Ø630mm 1x three-pack forks ForkardtØ400mm Spinning tip Cooling device. The machine is also equipped with a digital measuring system in the X-axis, as well as Z-axis. more
4

Center Lathe TOS SUS 63-8000

Bühl, GermanyGermany dealership location
6593 km
1983
used
turning diameter over bed 630 mm turning diameter over slide rest 390 mm turning length 8000 mm centre height 315 mm workpiece weight max. 6000 kg spindle bore 82 mm spindle diameter in front bearing 150 mm speeds: 9 - 1120 U/min. tailstock quill taper MT 6 thread pitch 0,5 - 224 mm feeds longitudinal slide 0,049 - 3,00 mm/U feeds cross slide 0,024 - 1,5 mm/U Qmmiphbr spindle drive 18,5 kW total power requirement 18,5 kW weight of the machine ca. 10,2 t range L-W-H 10,00 x 1,80 x 1,70 m wit... more
5
Heavy lathe, lathe, lathe, Center and lathe Ei9nqcfsk Turning length 4000 mm rotating Ø bed 600 mm rotating Ø without bed 710 Rotating ø support 360 mm spindle bore 70 mm faceplate 630 mm engine 15.5 kW Multifix steel holder Recording live MK5 Dimensions 6300/1450/H1600 mm Weight 5,500 kg more
8
- Serial # : SL251DB0429 - Year : 2004 - Stock # : 6665 - Diameter Bar capacity : 73 mm - Max Swing over bed : 675 mm - Max swing over transversal slide : 544 mm - Max machining diameter : 400 mm - Standard machining diameter : 250 mm - Max machining length : 2050 mm - Distance between centers : 2100 mm - Spindle Power : 18,5/15 kW - Spindle Bore : 88 mm - Spindle Nose : JIS A2-8 - Spindle Speed Range : 4000 Tr/min - 1 Turret / 10 stations - X Axis Travel : 250 mm - Z Axis Trave... more
7
Muller & Pesant lathe offered. Turning diameter bed: 630 mm Turning diameter support: 410 mm Turning length: 1500 mm Diameter spindle bore: 71 mm Speed: 18-1400 RPM Year of built: 1986 Included coolant pump Dimensions: 315x95x135 cm (LxWxH) Ebfawjj For more information call us or send an e-mail. more
6

Center Lathe VDF-BOEHRINGER

Willich, GermanyGermany dealership location
6368 km
1973
used
turning diameter over bed 700 mm turning diameter over slide rest 420 mm turning length 1250 mm Liipt spindle passage 80 mm steady for max. workpiece diameter from 420 mm total power requirement 50 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 4x2x1,7 m more
5
The equipment of a training workshop or similar are three EMCO Maximat Super 11 CD for sale. The lathes are ready and have no technical defects. Wide range of accessories such as coolant system, Stehlynette, multi fix holder, Spangzangenaufnahme would be available if needed. The price refers to the acceptance of a lathe, a package price is possible for the purchase of all lathes. The selected images are an example of a lathe Machine number: Year of construction: C6R J2 007 1996 C6R K5 02... more
2

Center Lathe POREBA TR70x1500

Ennepetal, GermanyGermany dealership location
6422 km
1980
used
turning diameter over bed 0700 mm turning diameter over slide rest 380 mm Bcsqhrsbck turning length 1500 mm total power requirement 9 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 4 x 1,8 x 1,6 m more

Center Lathe OERLIKON DM 2a

Velen-Ramsdorf, GermanyGermany dealership location
6370 km
used
turning diameter over bed 625 mm turning diameter over slide rest 385 mm turning length 2500 mm turning speeds 7 - 1070 U/min centre height 300 mm spindle bore 62 mm total power requirement 20 kW weight of the machine ca. 5,2 t Dimensions (LxWxH) 4,7 x 1,4 x 1,6 m Hc0blqhp8 Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more
1

Used Heavy Duty Lathe Stanko 1M63

Hvidovre, DenmarkDenmark
6535 km
1993
excellent (used)
Turning length 6000 mm Swing over bed 630 mm Swing over cross slide 350 mm Ptqxpi Center height 315 mm Spindle speeds 10 - 1250 Spindle bore 70 mm Range of feed in x - axis 0,064 - 1,025 mm/rpm Range of feed in y - axis 0,0256 - 0,378 mm/rpm Tailstock taper MT 5 Tailstock quill stroke 240 mm Total power requirement 13 kW Equipped with: 3-jaw husk 2 axis Sony DRO 2 pcs. steady rests 1 following rest Quick change tool post w/2 side holders Transformator for 220-415 volt more
5

lathe-conventional-electronic BOEHRINGER DM 640

Niederlangen, GermanyGermany dealership location
6346 km
1980
used
turning diameter:640 mm turning length:4000 mm swing diameter over bed slide:380 mm swing diameter:in der Kröpfung 680mm mm length of gap:100 mm spindle bore:82 mm lead of leadscrew:12 mm morse taper:6 Ykhojzmgd faceplate diameter:560 mm speeds:9 - 1800 U/min longitudinal feeds::0,05 - 1,8 mm / Umdrehung face feeds:0,025 - 0,9 mm / Umdrehung quill adjustment:280 mm weight of the machine ca.:5850 kg dimensions of the machine ca.:7,0 x 1,6 x 1,4 m total power requirement:22 kW Technical documen... more
6

Heavy Duty Lathe MFD - HOESCH D1100

Willich, GermanyGermany dealership location
6368 km
used
turning diameter over bed 2100 mm turning diameter over slide rest 1300 mm turning length 6800 mm workpiece weight 25000 kg main drive motor 140 kW Control Siemens type 840 C faceplate 1100 mm bed width 2500 mm steady 800 mm steady 800 mm steady 800 mm steady 600 mm chip conveyor total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Bs9ph3gc more
6
turning length 3000 mm turning diameter 630 mm centre height 315 mm swing diameter over bed slide 430 mm turning speeds 2.000 U/min spindle bore 105 mm Hhbrtejou bed width 520 mm tailstock quill taper MT 6 MK total power requirement 15,0 kW weight of the machine ca. 3.560 kg. more
2

Center Lathe POREBA TUD40x1000

Ennepetal, GermanyGermany dealership location
6422 km
1978
used
turning diameter over bed 0400 mm turning diameter over slide rest 200 mm Bcsqg8pv0i turning length 1000 mm total power requirement 5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,8 x 1,3 x 1,6 m more
4
turning diameter over bed 535 mm turning diameter over slide rest 360 mm turning length 2500 mm centre height 270 mm turning diameter in the gap 810 mm spindle passage 89 mm turning speed range 18 - 1400 U/min total power requirement 10,55 HP weight of the machine ca. 3,8 t dimensions of the machine ca. 4,2 x 1,2 x 1,6 m Mvnmf - 3-jaw chuck diameter 200 mm - Quick-change tool holder with 1 holder - Removable bridge - Tailstock - Thread cutter - Lynette - Machine Light more
5
Turning diameter over bed 400 mm Top width 1150 mm Delivery promptly, subject to prior sale Tip height: 200 mm Top width: 1,150 mm Spindle bore: 52 mm Speed: 40-2,200 RPM (12). Motor: 4 kW Bed width: 300 mm Turning diameter over bed: 400 mm Rotation Ø in the bend: 600 mm G8wcl09ne Turning diameter over longitudinal slide: 370 mm Turning diameter over cross slide: 210 mm Length of the bend before the face plate: 160 mm Length of the cross slide: 300 mm The upper slide length: 130 ... more
6
Tip height 360 mm Top width 1500 mm Turning diameter over bed 730 mm Swing into the recess 780 mm turning diameter over support 480 mm Spindle bore 83 mm Spindle mount DIN 55027 Gr. 8 Speed range 9-1800 rpm Feeds along 0,092-41 mm / Rev Feeds, 0,046-20 mm / U metric threads cross 0.05-112 mm "Whitworth thread of 56 - 1/8 Gg /" Module 0.125-28 M "Diametrically opposed Pitchgewinde 1-224 Gg /" Live recording of MK 6 22 kW Machine dimensions L x W x H 3300 x 2000 x 1850 mm Weight 400... more
5

Center Lathe BOEHRINGER V5

Willich, GermanyGermany dealership location
6368 km
used
turning diameter over bed 700 mm turning diameter over slide rest 450 mm Hkmc7srqe turning length 3000 mm digital readout Rapid travel turning speeds 14-710 U/min hollow 125 mm steady 2 Holder Multifix faceplate mm total power requirement 11 kW weight of the machine ca. 5 t dimensions of the machine ca. 6x1,5x1,5 m more
2

Center Lathe VDF-BOEHRINGER V 5 x 6000

Metzingen, GermanyGermany dealership location
6677 km
1964
used
turning diameter over bed 680 mm turning diameter over slide rest 480 mm turning length 6000 mm Fgrixztyc total power requirement 18 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m more
2

Center Lathe POREBA TUD50x1000

Ennepetal, GermanyGermany dealership location
6422 km
1980
used
turning diameter over bed 0500 mm turning diameter over slide rest 250 mm turning length 1000 mm total power requirement 7 kW weight of the machine ca. 2,5 t Bcsqesgi0a dimensions of the machine ca. 3,2 x 1,4 x 1,5 m more
2
Lead and train screw lathe in excellent condition Kebyoewl from an Institute in geometric mint condition Tip height on flat track 310 mm turning diameter over flat route 620 mm Tip height in the offset 342 mm Turning diameter in the offset 680 mm Length 400 mm the bend before the headstock Centre distance approx. 1,000 mm, rapid traverse longitudinal and plan Spindle speed: 24 levels of 11.2 2,240 rpm,. with hydro copy clean direction "Sauter" KC 70.11 (subsequently mounted) Coolant ... more
6
distance between centres 1,500 mm turning diameter over bed 500 mm turning diameter over recessing and end facing sliding tool 380 mm lathe chuck FORKARDT 325 mm with changeable jaws face plate RÖHM 620 mm spindle bore 81 mm spindle speeds 19 steps 24 to 900 rpm longitudinal feeds 40 steps 0.05 to 1.4 mm / rotation face plate RÖHM 500 mm spindle bore 65 mm spindle speeds 18 steps 22.4 to 18,500 rpm longitudinal speeds 40 steps 0.05 to 1.4 mm / rotation 2s38l0cvf cross feeds 40 steps... more


Center lat...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close