Used Zmm for sale (50)

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 40032, turning diameter over cross slide: 490 mm, turning diameter over bed slide: 890 mm, center height: 445 mm, spindle speed (max.): 1,000 rpm, workpiece weight (max.): 5,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 890 mm Swinging diameter over slide: 490 mm Swinging diameter in removable bed: 1,060 mm Spindle speed range: 3.7 – 1,000 rpm Spindle bore: 155 mm Center height: 445 mm Distance between centers: 3,000 mm Bed width: 700 mm Maximum workpiece weight: 5,000 kg Gbedpfxezrmrbs Af Ajr MACHINE DETAILS Drive system: Conventional Digital position display: Fagor Connected power: 30 kW Dimensions & Weight Dimensions (L x W x H): 5,100 x 1,800 x 1,950 mm Machine weight: 7,500 kg EQUIPMENT Three-jaw chuck Quick-change tool holder Steady rest Digital position display Fagor Removable bed CE marking Documentation

Condition: good (used), Year of construction: 1997, spindle bore: 62 mm, turning diameter over bed slide: 440 mm, turning diameter over top slide: 230 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 700 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, Centre lathe ZMM Sliven - CU 400 MACH-ID 9758 Make: ZMM Sliven Type: CU 400 Year: 1997 DBC Turning Length: 2000mm Swing over bed Ø: 440mm Swing over cross slide Ø:230mm Swing in the gap Ø: 620mm Spindle bore: 62mm Spindle power: 8kW Bed width: 360mm Tailstock spindle Ø: 70Ø Stroke pinole: 180mm Spindle taper: 5Mk Speeds / ranges: 2000Rpm Length: 3500mm Width: 700mm Height: 1500mm Weight: 2600kg Gbedpfx Aozpwixsf Ajr Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Gedpfowudhuox Af Aobr Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1984, machine/vehicle number: 20032, Offer 21276 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle mount MK 3 Gbjdpjzm Tw Hjfx Af Aer - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Right-hand and left-hand rotation - Drill spindle stroke 160 mm - Overhang 350 mm - Table with 3 T-slots, height-adjustable 340 x 320 mm - Table can be tilted to the left and right - Max. distance table – drill spindle 500 mm - Max. distance machined base plate – drill spindle 1050 mm - Column diameter 160 mm - Lighting - Coolant system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: ready for operation (used), Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college (!!) - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Gjdpfxexab Tps Af Aebr Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Turning trials were performed using a VCGT insert with a radius of 0.2. Gjdpfoy Rq Utox Af Asbr 160 mm Bison chuck with split jaws Turning length: 750 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Tailstock taper: MK3 Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: excellent (used), Conventional lathe Manufacturer: ZMM Sliven Huvema Inventory No. 3855 Type HU310 x 750 Year of manufacture 2007 Distance between centers 750 mm Center height 155 mm Swinging diameter over bed 310 mm Spindle bore 32 mm 3-jaw chuck Gedpfezlx Nlsx Af Ajbr Quick-change tool holder Voltage 380 V Machine weight approx. 700 kg

Condition: excellent (used), Conventional lathe Manufacturer: ZMM Sliven Huvema Inventory no. 3854 Type HU310 x 750 Year of manufacture 2007 Distance between centers 750 mm Center height 155 mm Gsdpfozlx H Rsx Af Aobr Swinging diameter over bed 310 mm Spindle bore 32 mm 3-jaw chuck Quick-change tool holder Voltage 380 V Machine weight approx. 700 kg

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm Gjdozdkz Djpfx Af Ajbr centre height: 500 mm spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min face slide travel: 525 mm tailstock quill taper MT: MK 6 tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine xH: 8,3 x 2,0 x 1,90 m

Condition: good (used), functionality: fully functional, ZMM NK 251 Gear-Driven Pillar Drilling Machine | MK4 | Thread Cutting | Industrial Version For sale is a robust ZMM NK 251 gear-driven pillar drilling machine in a heavy-duty industrial design. The machine features a powerful gear drive, automatic quill feed, and a height-adjustable drilling table. Due to its massive cast iron construction, it is ideally suited for use in mechanical engineering, toolmaking, steel construction, as well as in repair and training workshops. Gjdpfx Afoziuq Hs Ajbr The NK 251 is designed for continuous industrial use and impresses with its high stability, reliability, and long service life. Equipment Manufacturer: ZMM / Metalik Type: NK 251 Gear-driven pillar drilling machine Right/left rotation Automatic quill feed Height-adjustable drilling table Large base table Coolant system Robust cast iron design Industrial quality Technical Data Feature Value Drilling capacity in steel 25 mm Thread cutting up to M20 Spindle taper MK4 Quill stroke approx. 160 mm Overhang approx. 315 mm Spindle speeds approx. 90–2,000 rpm Number of speeds 12 Table size approx. 500 × 400 mm Base plate approx. 700 × 500 mm Main motor approx. 2.2 kW Machine weight approx. 750 kg The specifications correspond to the standard design of the NK-251 series and may vary slightly depending on the year of manufacture. Condition Used Robust industrial design Well-maintained overall appearance Sold as shown Inspection and functional testing possible by arrangement.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 79430 € 1501.23 € 600 mm 1500 mm 300 mm 80 mm 400 mm 400 mm 8 Gsdpjwirn Ssfx Af Asbr 90 MK 3 20 - 100, 80 - 400, 400 - U/Min max. 8 m/min max. 8 m/min 290 mm 90 mm 5 MK 225 mm 11 kW 3,5 / 22 kW/Nm 1,75 / 11 kW/Nm 120 Nm 1250 daN 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 78 030,00 mm € 81030,00 mm € 84130,00 mm € 87330,00 mm € 90630,00

Condition: new, neu Bulgarien 58370 € 1103.19 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 3 Gjdpfx Afjyq Stpo Aebr 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 54970,00 turning length1.500 mm € 56350,00 turning length3.000 mm € 62720,00 turning length4.000 mm € 685,00 turning length5.000 mm € 83910,00

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK Gbodpfxjyq Stio Af Aer 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-

Condition: new, neu Bulgarien 140320 € 2652.05 € 1320 mm 3000 mm Gbjdjyq Stcepfx Af Aor 625 mm 155 mm 940 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 1/16 - 60 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning lenght 5.000 mm € 160150,00 turning length6.000 mm € 177240,00

Condition: new, neu Bulgarien 133550 € 2524.1 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" Gedpfx Aeyq Sr Sef Asbr 240 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 118510,00 turning length4.000 mm € 142090,00 turning length5.000 mm € 153400,00 turning length6.000 mm € 170390,00

Condition: new, neu Bulgarien 126650 € 2393.69 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer Gbsdpfjyq Sq Uox Af Asr electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 111610,00 turning length2.000 mm € 115430,00 turning length4.000 mm € 135290,00 turning length5.000 mm € 146500,00 turning length6.000 mm € 163590,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 53250 € 1006.43 € 500 mm 1500 mm 250 mm 75 mm 0 mm 400 mm 8 80 MK 3 25-100; 100-400; 500-2000 U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60-1/4 Gänge/" 240-1 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3100 mm 1250 mm 1400 mm 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) Gbsdpfx Ajyq Srfof Asr quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 51870,00 turning length2.000 mm € 55170,00 turning length3.000 mm € 59620,00 turning length4.000 mm € 656,00 turning length5.000 mm € 81110,00

Condition: new, neu Bulgarien 89440 € 1690.42 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard Gedpfsyq Sn Tjx Af Aebr levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 75340,00 turning length2.000 mm € 78380,00 turning length4.000 mm € 95860,00 turning length5.000 mm € 108730,00 turning length6.000 mm € 122800,00

Condition: new, neu Bulgarien 64180 € 1213 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 3 16 - 63; 63 - 250; 315 - U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates Godpfx Afsyq Sm Nj Ajbr quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 turning length1.500 mm € 62160,00 turning length3.000 mm € 686,00 turning length4.000 mm € 74540,00 turning length5.000 mm € 90020,00

Condition: new, neu Bulgarien 26210 € 500.61 € 325 mm 750 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 MK 2 85-405; 470-2200 U/Min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 0.1 - 1.75 70 - 4 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" Gbodpfx Aeyq Sngef Aer FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,-

Condition: new, neu Bulgarien 96240 € .94 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 MK 7 - 42; 28 - 170; 165 - 1 U/Min Gbjdpfx Afoyq Sm As Asr 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 82140,00 turning length2.000 mm € 85080,00 turning length4.000 mm € 102660,00 turning length5.000 mm € 115430,00 turning length6.000 mm € 129500,00

Condition: new, neu Bulgarien 114970 € 2172.93 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 MK 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" Gedowirxqepfx Af Ajbr 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 100,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5.000 mm € 134810,00 turning length6.000 mm € 151900,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK Gbsdjxzuu Ajpfx Af Asr 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, neu Bulgarien 56920 € 1075.79 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 21 12,5 - 1250 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60 - 1/4 Gänge/" 240 - 1 315 mm 90 mm 90 mm 5 MK Gbsdpjwirv Ajfx Af Aer 2 mm 11 kW 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 53520,00 turning length1.500 mm € 54880,00 turning length3.000 mm € 61360,00 turning length4.000 mm € 67270,00 turning length5.000 mm € 82750,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113620 € 2147.42 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm Gbjdpfswirghjx Af Asr 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.