Used Fine Structure for sale (4,903)

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: Knedpoq Nf Uwefx Aqrec 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, type of input current: three-phase, total width: 1,050 mm, total length: 3,800 mm, total height: 1,750 mm, input current: 5 A, Schou L-2500 Heavy duty universal line boring machine Manufacturer: Schou & Co. Ltd., Copenhagen, Denmark Production era: Late 1970s – mid-1980s (Heavy Duty series) Design: Precision bore machining equipment for line boring engine blocks and gear casings Maximum boring length: 2500 mm Boring diameter range: 25 mm – 200 mm (depending on accessories) Kjdoz Rw T Espfx Aqrsnc Table length: 2500 mm Spindle speed: Infinitely variable or multi-stage adjustable hydraulic/mechanical drive Feed: Automatic, fine-adjustable longitudinal feed for micron-level surface finish Frame structure: Vibration-free, special cast-iron bed with integrated support bridges Machine weight: approx. 1800 – 2200 kg (depending on equipment) 2. Accessories and equipment • Complete boring bar set (in various diameters and lengths) • Precision clamping blocks and support units for block alignment • Centering bridges and dial indicator measuring devices • Tool setting micrometer • Integrated control panel with emergency stop • Boring grinder / milling auxiliary unit (depending on model)

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Knodpfxeq Nf U Ej Aqrjc Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) Knedpfoy Au Alex Aqrjc • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Industrial Grinding & Micronization System Complete Industrial Production Line – Manufactured in 2019 A complete industrial grinding and micronization system manufactured in 2019 by Desintegraator Tootmise OÜ, Estonia. The system is designed for high-speed fine grinding of dry, powdery and granular materials to produce fine powders. Applications The DESI-14 is designed for fine grinding and micronization of a wide range of suitable materials, including mineral, synthetic, organic and biological materials. It is intended for industrial applications where particle-size reduction and fine powder production are required. Suitability and achievable fineness depend on the properties of the material and the operating conditions. Kedpfxozy Nbhs Aqrjnc The integrated production line includes material feeding, a high-speed impact disintegrator, cyclone separation, automatic air filtration, product conveying and big-bag discharge. Key Features & Technical Specifications Manufacturer: Desintegraator Tootmise OÜ, Estonia Model: DESI-14 Year of manufacture: 2019 - Main drives: 2 × 30 kW electric motors - Maximum total installed power: 80 kW - Rotor speed: Approx. 2,965 rpm - Rotor configuration: Six-row design - Feed hopper capacity: 1.5 m³ - Power supply: 380 V, three-phase, 50 Hz - Cooling: Water-cooled disintegrator housing and cover - Two complete rotor sets included Documented Factory Test Performance According to the manufacturer's technical documentation, the system was tested with calcium carbonate (CaCO₃), achieving a throughput of 1,000 kg/h, with 92% of the final product below 30 μm. The test used feed material below 100 μm with 2% moisture. Actual performance depends on the material being processed, its characteristics and the required final fineness. Complete System Includes: - DESI-14 high-speed impact disintegrator - Feed hopper and WAM screw feeder - Two cyclone separators - Three rotary valves - Screw conveyors - WAMFLO automatic air filtration system - Exhaust fan - Big-bag discharge system - Electrical control panel and supporting structures - Installation dimensions: Approx. 6,000 × 5,200 × 4,000 mm - Total gross weight: Approx. 2,700 kg Condition: Used industrial equipment, manufactured in 2019. Current operational condition and maintenance history to be confirmed. Further technical information, photographs and inspection arrangements are available upon request. Machine Condition & Availability Condition: Excellent and fully operational Location: Zagreb, Croatia Availability: Immediately available

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Ksdsq Ngafspfx Aqrsnc Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, functionality: fully functional, Year of construction: 2026, Cement Mill & Ultrafine Grinding Mill 🏗️ Introduction to Cement Mill & Ultrafine Grinding Mill In the world of construction and materials processing, achieving the right particle size is essential. Introducing the Cement Mill and Ultrafine Grinding Mill—two pivotal machines designed to deliver superior grinding performance for cement production and ultrafine materials. Let’s dive into their features and applications! 💼 🔥 What is a Cement Mill? A Cement Mill is a crucial piece of equipment in cement production. It grinds clinker, gypsum, and other additives to produce fine cement powder. This machine ensures the optimal particle size for high-quality cement, essential for building robust structures. 🚀 Kodpeq Nyydofx Aqrsnc 🔧 What is an Ultrafine Grinding Mill? An Ultrafine Grinding Mill is designed to produce extremely fine powders from various raw materials, such as minerals, chemicals, and industrial waste. It operates at high efficiency, delivering ultra-fine materials for advanced applications like coatings, plastics, and ceramics. 🌟 💼 Key Benefits of Using Cement Mill & Ultrafine Grinding Mill 1. High Efficiency: Both mills are engineered for maximum efficiency, ensuring rapid processing times and reduced energy consumption. 🌿💡 2. Superior Grinding Performance: Achieve consistent, high-quality output with precise control over particle size. 🏭 3. Versatility: Suitable for a wide range of materials, making them essential for various industrial applications. 🌳 4. Durability and Reliability: Built with robust materials, these mills offer long-lasting performance in demanding industrial environments. 💪 📈 Applications in Industry Cement Mill Applications: 1. Cement Production: Essential for producing high-quality cement for construction projects. 2. Infrastructure Development: Used in creating concrete for roads, bridges, and buildings. Ultrafine Grinding Mill Applications: 1. Mineral Processing: Producing ultra-fine powders for advanced material applications. 2. Chemical Manufacturing: Used in creating fine chemicals for various industrial processes. 3. Environmental Applications: Grinding industrial waste for recycling and reuse. ♻️ 🌟 Conclusion Whether you’re in construction, materials processing, or advanced manufacturing, the Cement Mill and Ultrafine Grinding Mill are indispensable tools. Their efficiency, versatility, and superior performance make them a valuable addition to any production line. Contact us today to learn more about these innovative machines and how they can revolutionize your operations! 📞

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Kedpfjx R Df Sex Aqronc Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: excellent (used), functionality: fully functional, 3000L paddle mixer with column loading system | Double-shaft mixer for meat and fillings Knedjz Rq Hropfx Aqrsc Type: Double-shaft paddle mixer Bowl capacity: 3000 liters Mixing system: Double paddle shaft Discharge system: Pneumatically/hydraulically operated bottom/front flap Loading system: Integrated column lift This 3000-liter double-shaft paddle mixer is a highly efficient machine designed for continuous industrial operation. It is suitable for use in large meat processing plants, butcher shops, delicatessen facilities, ready-to-eat food factories, and in the pet food and vegetable processing industries. It is designed for mixing, standardizing, and gently kneading various types of meat fillings, finely and coarsely ground sausages, salads, dumpling fillings, or vegetable mixtures. The core of the machine is a double paddle shaft system with specially shaped scrapers, which ensure fast, uniform, and thorough mixing of the entire batch without damaging the raw material's structure. The counter-rotating motion of the paddles eliminates dead zones in the bowl, allowing for optimal distribution of spices, brines, and functional additives. The integrated column lift enables the automation of the loading process. The machine features a robust construction that prevents vibrations during operation with heavy loads. The appropriately shaped bottom of the chamber, combined with the pneumatically operated discharge flap, allows for quick and hygienic discharge of the finished product directly into a buffer, unloader, or onto a conveyor belt.

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets Kjdpfxoz H Smwj Aqronc • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Knjdpfx Aqox R Dh Hjrjc Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, edge thickness (max.): 25 mm, height adjustment type: pneumatic, actuation type: electric, total height: 1,950 mm, total length: 8,000 mm, total width: 1,300 mm, overall weight: 7,500 kg, This high-performance SCM Stefani Solution XD is engineered for high-volume multi-shift industrial manufacturing, delivering continuous accuracy and a flawless edge finish even on the most sensitive high-gloss or thin-film materials. Equipped with a solid monolithic structure and advanced NC electronic touch controls, this specific 4-cabinet configuration maximizes stability and houses a comprehensive setup of high-end processing aggregates. Manufacturer: SCM Group (Italy) Model: Stefani Solution XD Configuration: Right-Hand Feeding Condition: Excellent, Fully Operational Location: Plovdiv, Bulgaria Availability: Immediate Estimated Footprint & Shipping Dimensions Total Machine Length: Approx 8,000 mm Total Transport Length: Approx. 8,300 mm (including extended infeed guides) Machine Width: Approx. 1,300 mm (transport width with side panel supports retracted) Machine Height: Approx. 1,950 mm (with safety hoods closed) Estimated Operating Weight: 7,500 kg Technical Specifications Feed Speed: Up to 25 – 30 m/min (NC-controlled variable track speed) Panel Thickness Capacity: 8 mm to 60 mm Edgeband Thickness Capacity: 0.3 mm to 22 mm Max Coiled Edge Capacity: 3 mm Actuation Type: Pneumatic & Multi-Axis Electronic Servo Motors Height Adjustment: NC-Motorized Automatic Top Belt Pressure Beam Pneumatic Requirement: 6 bar Control System Software: Maestro Pro-Edge / Active Edge Interface Premium Installed Working Units (Aggregates) This machine features a robust multi-station arrangement with a multi-hose high-efficiency central dust extraction layout: Pre-Milling Unit: High-capacity dual cutter block layout utilizing Hydro-Lock tool connections to guarantee zero vibration during panel edge squaring. Advanced Gluing Station (VC-600): Plasma-treated glue pot capable of rapid EVA and PUR hot-melt changes, backed by rapid pre-melting technology. Kjdpfx Ajzcccroqrenc End-Trimming & Fine Trimming Units: Rigid, low-inertia dynamic structures built to ensure zero scoring on fragile surfaces. Round 4 Corner-Rounding Unit: Multi-axis 4-motor high-speed profile rounding unit processing at up to 30 m/min. Finishing Stations: Multi-edge profiling scrapers, glue scrapers, and motorized buffing units for an out-of-the-box clean edge. Automated Axis Positioning: Complete machine changeovers happen in minutes directly from the touchscreen console, maximizing uptime. Top Track Pressure Belt System: Secures fragile components far better than traditional small-wheel setups to keep protective films pristine. Energy Management Built-In: Programmed with the SAVENERGY system to reduce plant power consumption during cycle idle times.

Condition: like new (used), Year of construction: 2022, We offer the NOWICKI TYPHOON 90 KN-90 high-speed bowl cutter 2022 – a professional machine for the production of meat stuffing, fat emulsions, raw peel mashes, as well as vegetarian products and pet food. This is a modern TYPHOON series bowl cutter, designed for use in meat, fish, fruit and vegetable processing plants and ready-made meal production, where very fine grinding, uniform product structure and high process repeatability are important. The KN-90 cutter is equipped with a 90 l bowl and a high-performance knife system, which at high rotational speeds allows for ‘cutting in the air’, so that the stuffing does not overheat and retains the desired structure and colour. Stuffing mixing system through reverse rotation back. The electronically controlled drive allows for precise adjustment of the knife shaft and mixing speed, while the touch screen control panel facilitates operation and storage of ready-made technological programmes. The cutter has compact dimensions of 2200 x 1600 x 1630 mm, and the separate electrical cabinet has dimensions of 1000 x 500 x 1500 mm, which facilitates the installation of the set in an existing production hall. The robust, heavy-duty construction, made of stainless steel, meets the hygiene requirements of the modern food industry. Technical data: Manufacturer: NOMA Nowicki Machinery Knsdox H St Aepfx Aqrjc Series: TYPHOON 90, Type: KN-90 Year of manufacture: 2022 Bowl capacity: 90 l Power supply: 3×400 V, 50 Hz Power: 39 kW Rated current: 91 A Cutter dimensions: 2200 x 1600 x 1630 mm Electrical cabinet dimensions: 1000 x 500 x 1500 mm Advantages of the NOWICKI TYPHOON 90 KN-90 high-speed cutter: High-speed cutting system – very fine grinding of stuffing and emulsion with short processing time. Homogeneous product structure – the optimal shape of the bowl and the operation of the knives ensure a smooth, repeatable consistency of meat, vegetable and pet food stuffing. Modern control – touch panel, possibility to save technological programmes, full control over speeds and processing time. Universal application – red meat, poultry, fish, vegetables, fruit, plant products and animal feed. Construction – solid steel frame adapted to intensive work in industrial conditions.

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Kjdpoyl U Sqsfx Aqronc Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Year of construction: 2026, condition: new, functionality: fully functional, New vertical pressure leaf filter body Manufacturer: Juneng Model: NYB-20 Filter Area: 20 m² Cake Volume: approx. 400 L Capacity: approx. 4–6 t/h for crude / vegetable oil Working Pressure: 0.1–0.4 MPa, max. 0.5 MPa Shell Temperature: ≤150 °C Machine Volume: approx. 1,680 L Weight: approx. 1,700 kg Shell Diameter: approx. 1,100 mm Plate Spacing: 70 mm Inlet / Outlet: DN50 inlet/outlet, DN40 overflow, approx. DN400 discharge Material: carbon steel as standard Stainless steel version available on request at additional cost Important note: This offer is for the filter body only. PLC automation, automatic valve skid and installation are not included. Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – suitable for crude oil clarification and fine filtration Low maintenance – long service life of filter plates Simple cake discharge – vibration / discharge system depending on configuration Can be steam jacketed – optional heating for waxy oils Filter aid compatible – suitable for bleaching earth, activated carbon or diatomaceous earth Compact vertical design – high filtration area with limited floor space Typical Applications: Crude vegetable oil clarification after settling Bleaching earth filtration after bleaching tank Post-degumming or post-neutralization polishing Filtration of rapeseed oil, sunflower oil, soybean oil and other vegetable oils Technical oil, biodiesel and oleochemical filtration Food, biodiesel and cosmetic-grade oil prefiltration Suitable for oil mills, edible oil processing plants, biodiesel producers, oleochemical plants and industrial liquid-solid separation applications. Neuer vertikaler Druckblattfilter / Pressure Leaf Filter Hersteller: Juneng Modell: NYB-20 Filterfläche: 20 m² Filterkuchenvolumen: ca. 400 L Kapazität: ca. 4–6 t/h für Rohöl / Pflanzenöl Arbeitsdruck: 0,1–0,4 MPa, max. 0,5 MPa Arbeitstemperatur: ≤150 °C Behältervolumen: ca. 1.680 L Gewicht: ca. 1.700 kg Behälterdurchmesser: ca. 1.100 mm Plattenabstand: 70 mm Ein-/Auslauf: DN50 Ein-/Auslauf, DN40 Überlauf, ca. DN400 Austrag Knedpfx Ajzggc Njqroc Material: Standardausführung in Kohlenstoffstahl Edelstahl-Ausführung gegen Aufpreis auf Anfrage erhältlich Wichtiger Hinweis: Angeboten wird nur der Filterkörper. PLC-Automatisierung, automatischer Ventilstand und Installation sind nicht im Lieferumfang enthalten. Hauptmerkmale: Hermetisch geschlossene vertikale Bauweise – kein Auslaufen und geringe Geruchsemission Hohe Filtrationsgenauigkeit – geeignet für Rohölklärung und Feinfiltration Geringer Wartungsaufwand – lange Lebensdauer der Filterplatten Einfache Kuchenentleerung – Vibrations-/Austragssystem je nach Ausführung Optional beheizbar / dampfbeheizbar – geeignet für wachshaltige Öle Kompatibel mit Filterhilfsmitteln – geeignet für Bleicherde, Aktivkohle oder Kieselgur Kompakte vertikale Bauweise – große Filterfläche bei geringem Platzbedarf Typische Anwendungen: Klärung von rohem Pflanzenöl nach der Sedimentation Bleicherdefiltration nach dem Bleicher Polierfiltration nach Entschleimung oder Neutralisation Filtration von Rapsöl, Sonnenblumenöl, Sojaöl und anderen Pflanzenölen Technische Öle, Biodiesel und oleochemische Anwendungen Vorfiltration für Lebensmittel-, Biodiesel- und kosmetische Ölqualität Geeignet für Ölmühlen, Speiseölverarbeitung, Biodieselhersteller, oleochemische Anlagen und industrielle Fest-Flüssig-Trennung.

Year of construction: 2025, operating hours: 210 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973KZT03151, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes Kodpfoz Hx Rcsx Aqrsnc TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: excellent (used), INOTEC I225CD INDUSTRIAL EMULSIFIER-GRINDER – STAINLESS STEEL INOTEC I225CD industrial emulsifier-grinder, designed for fine grinding, homogenization, and emulsification processes of food products in high-capacity industrial lines. The equipment incorporates an upper feeding hopper and a high-performance cutting system that reduces particle size and produces homogeneous mixtures with a fine and uniform texture. INOTEC technology is especially suitable for the production of wet pet food, meat products, emulsions, and other food preparations that require intensive and continuous processing. MAIN FEATURES - Manufacturer: INOTEC - Model: I225CD - Type: Industrial emulsifier-grinder - Application: Fine grinding and emulsification - Continuous industrial operation - Upper product feeding hopper - Mechanical grinding and cutting system - Particle size reduction - Homogenization of mixtures - Production of food emulsions - Continuous feeding to the cutting chamber - Rotor and stator system according to configuration - Driven by an electric motor - Robust construction process chamber - Discharge of the processed product - Construction mainly in stainless steel - Industrial structure with access platform - Accessibility for cleaning and maintenance - Integrable into complete food processing lines OPERATING PROCESS The product is introduced into the upper hopper of the INOTEC I225CD, from where it is conveyed to the grinding chamber. Inside, the cutting system subjects the raw material to an intensive mechanical action that reduces particle size, disperses the components, and homogenizes the mixture. The degree of grinding and the final texture depend on the configuration of the cutting assembly, the characteristics of the product, and the operating conditions. Once processed, the product is discharged to the next production stages. It can be integrated with mixers, feed tanks, industrial pumps, cooking systems, heat exchangers, buffer tanks, and filling lines. APPLICATIONS Especially suitable for manufacturers of wet pet food, meat industries, and plants for the production of emulsified food products. Its applications include: - Wet food for dogs and cats - Pâtés and emulsions for pet food - Meat preparations - Fine meat pastes - Food emulsions - Mixtures of proteins and fats Knsdez R Tb Tjpfx Aqrec - Ground and homogenized products - Other formulations compatible with industrial emulsification The INOTEC I225CD represents a high-capacity solution for fine grinding and emulsification processes, allowing the production of homogeneous products that are prepared for subsequent cooking, heat treatment, or packaging operations. The production capacity, power, and configuration of the cutting system will depend on the technical characteristics of the installed unit. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, - Bongard 8.64 MG Series 4 - External dimensions: W 1440 x D 2700 x H 2600 mm - Baking chamber: W 680 x H 1900 mm - Rotating rack: 600 x 800 mm, 19 levels - Baking capacity: Up to 152 baguettes per batch - Rack rotation diameter: 1120 mm - Total baking surface: 9.1 m² - Heating capacity: 70 kW - Connection power: 0.18 kW - Maximum temperature: 280°C - Lifting mechanism: Rack with automatic lifting - Gas burner included for fast and even baking - Opticom electronic controls for precise baking parameter management - Pulsed steam injection, ideal for crispy and golden breads - Ergonomic handles and controls positioned on the right for easy operation - Fresh air intake at burner for optimal performance - Voltage: 400 V / 3-phase Knjdpfxjwr T Edo Aqroc - Weight: 1390 kg - Serial number: 930000015837 - Year of manufacture: 2014 Bongard 8.64 Series 4 Rotary Rack Oven – Gas or Oil Fired – Used A Compact Solution for Efficient and Uniform Baking Lrjy Tdewr T Edjxugsr Discover the Bongard 8.64 Series 4 Rotary Rack Oven, an outstanding second-hand solution offering both compactness and high performance. Designed to meet the needs of demanding professionals, this oven is ideal for maximizing production efficiency while optimizing your bakery space. Superior Performance for Even Baking The Bongard Series 4 Oven stands out thanks to advanced technologies that ensure uniform and top-quality baking: - Soft Flow Ventilation: This technology provides gentle, uniform air circulation, perfect for baking delicate goods such as fine pastries and rolls. Thanks to even heat distribution, your creations will remain intact and achieve ideal baking results. - Efficient Steam System: Equipped with structured cast iron gutters, the oven produces high-quality steam to improve the development of your bakery goods. For greater needs, optional ESG steam units can boost steam production capacity, ensuring optimal performance. Durable and Practical Design The Bongard 8.64 Series 4 Oven is built to withstand the rigors of intensive production environments while providing excellent user comfort: - Robustness and Longevity: Fitted with a high-performance refractory stainless steel heat exchanger and a reinforced base, this oven is engineered for outstanding durability. Electric elements are rigorously selected for maximum service life. - Simplified Maintenance: The seamless stainless steel baking chamber facilitates cleaning. Features such as the raised-edged floor and retractable steam units minimize residue accumulation. The listing was translated automatically. Translation errors are possible.

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Knodpjz A Hh Uofx Aqroc

Condition: excellent (used), functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 26,390 kg, drive condition: 75 %, Year of construction: 2023, operating hours: 2,360 h, Equipment: UVV, adjustable boom, gripper hydraulics, hammer hydraulics, Hyundai, Crawler Excavator, HX235ALCR ENGINE Cummins B6.7 / STAGE V Engine Power: 173 hp (129 kW) at 2,200 rpm Ksdpfozdrblsx Aqrsnc HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power Modes, 2 Work Modes, User Mode Variable Power Control Electronic Pump Flow Control (EPFC) Flow control for attachment mode Idle Auto Function Automatic Engine Shutdown Electronic Fan Control CAB AND INTERIOR CAB ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12V power outlet (24 VDC to 12 VDC converter) Electric horn All-weather steel cab with 360° panoramic view Safety glass, toughened Windshield as a sliding window Sliding glass window (left) Lockable door Storage compartment and ashtray Transparent cab roof liner Sun visor Door and cab locks, one key Pilot-controlled joystick with pre-control pressure assist Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheater) CENTRAL MONITORING 8" LCD display Engine RPM or odometer/speedometer Engine coolant temperature gauge Maximum power Slow/fast travel speed Idle Auto Function Overload warning with alarm Engine check Air filter clogged Indicators ECO indicators Fuel level indicator Hydraulic oil temperature indicator Fuel preheater Warnings Communication error Low battery capacity Clock SEAT Mechanically suspended, heated driver's seat CAB WITH ROPS ROPS (Rollover Protective Structure) ISO 12117-2 SAFETY Work Mode Master switch, battery Rear-view camera Four front work lights (2 on the boom, 2 on the front frame) Driving alarm Electronic swing parking system Boom holding system Stick holding system Boom cylinder safety valve with overload warning device Two exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel pre-filter Self-diagnosis system Batteries (2 x 12 V × 100 Ah) Accumulator for lowering work equipment UNDERCARRAGE Lower frame cover (standard) Ground plates Triple-plate ground plates (600 mm) Track roller guides Boom 5650 mm (Variable length boom) Boom safety valves (Variable length boom) Stick 2920 mm Stick safety valve (on variable length boom) With bucket linkage Upper carriage for variable length boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for rotation function Lines for quick coupler Long crawler undercarriage with blade holder Ground plate 1 pedal (Variable length boom/2-way) Crawler tracks 600 mm (triple-plate) Front blade Reinforced lower frame plates 19 inch Kawasaki joysticks + EPFC Proportional joysticks Fine swing control Swing lock One-pedal straight-line travel system Air-suspended, heated seat SmartKey + button + auto shutdown Fuel filling pump Air compressor Hyundai HX paint With work light on the boom (LED) Work light at the front of the cab (LED) Work light at the rear (LED) All-around view monitor (AAVM) FOG protection (front and top) Laminated 7mm window glass Fuel preheater Central lubrication Beka (Variable length boom) (Europe) Hydraulic oil - VG46 Turbo II air precleaner Hydraulic quick coupler CW40 with LH, with one digging bucket

Year of construction: 2025, operating hours: 225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973LZT031244, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES Kjdpfx Aqsztakyersnc All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, LASKA FZ 175 | Emulsifier / Meat Emulsifying Cutter (Micro-Cutter) Manufacturer: LASKA Kjdjzgxr Nepfx Aqronc Model / Type: FZ 175 Serial number: 14127 Year of manufacture: 2012 Power supply: 400 V | 3 Ph | 50 Hz | 155 A Power: 91 kW Diameter: 175 mm Dimensions: 2350 x 1180 x 1300 mm The LASKA FZ 175 is a professional industrial emulsifier, a technologically advanced machine that is a key component of modern meat processing lines. This device is designed for continuous operation in medium and large-sized facilities. It is used for ultra-fine, finely granular processing, emulsification, and homogenization of fillings for sausages, frankfurters, pâtés, mortadella, and other similar products. It performs exceptionally well where a perfectly smooth, stable emulsion structure with minimal air bubbles is essential. The core of the machine is a unique, multi-stage geometry of the cutting system, working in conjunction with a 175 mm diameter disc and driven by a powerful 91 kW motor. The LASKA FZ 175 is distinguished by its patented electro-hydraulic system for automatic adjustment of the knife pressure against the disc. This solution guarantees constant, optimal cutting conditions while minimizing friction. In practice, this allows for a reduction in the wear of the working parts by up to 50% compared to traditional emulsifiers, drastically reducing operating costs and eliminating the risk of overheating the raw material.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 19973, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2010 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Kedpfx Ajwqrgksqrenc Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. ✅ Key Features – Ciclope Altair 4-2V AP (2010) Year of Manufacture: 2010 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping across Ireland, UK, and Europe. 📞 Contact Us Today Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 20224, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2011 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. ✅ Key Features – Ciclope Altair 4-2V AP (2011) Year of Manufacture: 2011 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility Knedpfx Aowqrhuoqrjc 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping and setup support across Ireland, UK, and Europe. 📞 Contact Us Today Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2015, Processing Specifications: Knsdpfx Aqezqt Dnorsc Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system