Used Fine Structure for sale (4,946)

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Lasdpfxjzqt Dns Ahajh Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Ledoy S Axgspfx Ahasah Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. Ledpfx Aozv U Tbehaoah • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Ljdpfox Dmdhox Ahasah Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: used, Year of construction: 2011, The BAADER 600 Meat Separator is a compact, efficient, and reliable machine designed for the gentle separation of soft tissue from harder components such as bone, cartilage, tendons, or skin. Manufactured in Germany in 2014, this model is ideal for food processors looking to maximize yield while maintaining product quality and texture. Technical Specifications: Manufacturer: BAADER Type: 600-501 Year: 2011 Laedezx Dx Sjpfx Ahaoh Mesh size: 3 mm Power rating: 400V / 3Ph / 50Hz / 2.0 hp / 1.5 kW / 4.0 A Wiring diagram: 600.70.00.854 Weight: 290 kg Dimensions: L: 102 cm, H: 123 cm W: 95 cm Country of origin: Germany ✅ Key Features: Gentle product handling – preserves the structure of meat, poultry, or fish High-precision 3 mm mesh – perfect for fine separation Compact and lightweight – easy to install in any production line Low energy consumption – only 1.5 kW Easy to clean and maintain – made from food-grade stainless steel Ideal for fish, poultry, and red meat applications Built with high-quality German engineering for long-term reliability BAADER 600 Meat Separator is a proven solution for processors aiming to improve product recovery, reduce waste, and optimize efficiency in soft tissue separation.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Technical Specification Lodpfxjzzwhfs Ahasah Feed Speed 11 m/min

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Lasdpfx Ajz A Tl Tehajh Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: not inspected (used), Number of sanding units 4 St Ljdpot Tqy Ejfx Ahasah sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Lajdjztpxmjpfx Ahaoh

Year of construction: 2006, condition: excellent (used), functionality: fully functional, machine/vehicle number: 70/060260, For sale: OTEC fine polishing machine - Model: DF 70 - Serial no.: 70/060260 - Year of manufacture: 2006 Laedsz Iym Uopfx Ahaoh - Power: 2 kW - Weight: 450 kg ADDITIONAL EQUIPMENT - Coolant tank - Automatic polishing paste dosing system - Printer (for reports) - 10 tool holders - 1 mixer holder For sale: a machine for the fine polishing of various metal parts following machining processes. It can also be used to clean heavily soiled or stubborn surfaces on parts made from various materials. The machine is fully automatic and features an additional coolant tank, which prevents the polishing media and the parts from overheating, allowing for continuous operation of 10 hours or more. Workpieces are polished by being fully or partially submerged in the polishing media, ensuring even contact across all surfaces, including the deepest and most hard-to-reach areas. The machine has seen very little use and has been regularly maintained. It is connected to the power supply and ready for immediate operation.

Condition: as good as new (ex-display), Demonstration Machine The professional brushing machine from Holzprofi is designed for final surface finishing tasks, including fine sanding, structuring, ultra-fine sanding, and other finishing operations. The surface result depends on the tools used. Lsdpfevrvwqjx Ahaoah Standard Features: - 2 height-adjustable rubber-coated pressure rollers - Height scale with roller height display - Electrically adjustable roller height - Automatic star-delta switch - Machine is CE compliant Technical Data: Working width: 400 mm Max. tool diameter: 300 mm Mounting shaft diameter: 40 mm 2 feed speeds: 4.5 / 9 m/min Motor output S1 at 100% duty: 5.5 HP (4 kW) Max. workpiece height: 300 mm Brush roller RPM: 1140 rpm Brush diameter: 120 - 300 mm Machine dimensions (L x W x H): 1500 x 1000 x 1750 mm Weight: 435 kg Additional equipment available on request Extras not included in the price (Representative image)

Condition: used, Year of construction: 2010, overall weight: 16,000 kg, maximum load weight: 12,250 kg, empty load weight: 3,750 kg, loading space width: 2,490 mm, loading space length: 7,250 mm, loading space height: 2,400 mm, Equipment: cooling unit, GERMAN DEALER offers: BDF refrigerated box body Carrier 750 unit in working order 2 rows of lashing rails Baseboard protection strip Telescopic support legs 16,000 kg gross vehicle weight 3,750 kg unladen weight Year of manufacture: 11/2010 Interior dimensions: 7250x2490x2400 mm Many interchangeable platforms and chassis are in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY IS POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING ONLY BY APPOINTMENT! Lsde Adnynspfx Ahajah #####

Condition: used, We offer a used KARL SCHNELL 119 FD 225 D emulsifier – an industrial machine designed for continuous cutting, emulsifying, homogenizing and grinding of food products. The machine is suitable for meat processing plants, fish processing plants, production of fillings, pâtés, sauces, pastes, delicatessen products and convenience food. The KARL SCHNELL 119 FD 225 D belongs to the FD series of inline emulsifiers. Machines of this type are used wherever a very fine, uniform and stable product structure is required. The FD series is designed for high-quality emulsification and can be adapted with suitable cutting tools and drive configurations depending on the processed product. The heart of KARL SCHNELL emulsifiers is the KS cutting system, which enables intensive product size reduction in a continuous process. Depending on the application, this type of machine can operate with different cutting tool configurations, including knife systems with perforated plates. This allows the machine to be adapted to products with different structures, viscosity and technological requirements. The inline cutter operates continuously – the product is fed into the working chamber, passes through the cutting system and is discharged as a finely cut or emulsified mass. This solution helps increase production efficiency, reduce manual work and achieve repeatable product quality in subsequent batches. The machine can be used as a standalone unit or as part of a larger technological line, for example after preliminary grinding, mixing or bowl cutting. The KARL SCHNELL 119 FD 225 D is a good solution for plants looking for an efficient inline emulsifier for industrial food production. Technical data: Manufacturer: KARL SCHNELL Model: 119 FD 225 D Machine type: emulsifier Power: 74 kW / 100 HP Power supply: 400 V Frequency: 50 Hz Motor speed: 2975 rpm Control cabinet operating voltage: 3 × 400 V / 50 Hz Control voltage: 230 V AC Construction: stainless steel Lasdpfxszi U Rmj Ahajh Application: cutting, homogenization and emulsification of food product Main advantages: continuous inline operation high power of 74 kW motor speed 2975 rpm intensive cutting and emulsification of product possibility of obtaining a fine and homogeneous mass structure suitable for fillings, emulsions, pâtés, sauces and pastes can operate as a standalone machine or as part of a technological line solid industrial construction stainless steel construction renowned manufacturer KARL SCHNELL solution for continuous production in food processing plants

Condition: used, Year of construction: 2002, power: 90 kW (122.37 HP), The CFS ChunkMaster 400 industrial grinder is a heavy-duty machine designed for meat processing plants that require exceptional performance, consistent raw material particle size, and the highest quality finished product. The machine is based on the proven Wolfking/CFS grinding platform, later continued as part of the GEA product portfolio, which is why the ChunkMaster 400 enjoys an excellent reputation in the industry for its reliability, durability, and low maintenance costs. Laedpszmgqtjfx Ahajh Technical Specifications of the CFS ChunkMaster 400 Meat Grinder Manufacturer: CFS Model: ChunkMaster 400 Equipment type: Industrial meat grinder Year of manufacture: 2002 Grinding system diameter: Ø400 mm Power supply: 400 V, 3-phase, 50 Hz Current draw: 162 A Power: 90 kW Dimensions: What is the CFS ChunkMaster 400 meat grinder used for? The ChunkMaster 400 is designed for grinding a wide range of meat raw materials: beef, pork, poultry, fat, and trimmings, as well as fresh, chilled, and slightly tempered meat. The machine is well-suited as part of a raw material preparation line for the production of sausages, ground meat mixtures, burgers, pet food, and convenience products. The large feed hopper, with a diameter of Ø400 mm, allows for the processing of significant quantities of raw material while ensuring gentle handling of the product and minimal temperature increase during grinding—which directly impacts the quality and shelf life of the finished product. Design and Cutting System The ChunkMaster 400 grinder is equipped with a robust stainless steel frame, a durable feed auger, and an industrial gearbox designed for continuous operation in large meat processing plants. The raw material feeding system ensures a smooth and uniform product flow, minimizing compression—thereby preserving the natural structure of the muscle tissue and resulting in a higher-quality final product. The machine can be configured with various Unger cutting sets, allowing for raw material particle sizes ranging from coarse pre-grinding to fine grinding, depending on the blades and screens used. Key advantages of the CFS ChunkMaster 400 grinder Large grinding system with a diameter of Ø400 mm, Exceptionally high production capacity, Gentle handling of raw materials, Minimal temperature increase during grinding, Excellent preservation of meat particle structure, Industrial-grade, heavy-duty gearbox and hygienic stainless steel construction, facilitating access for cleaning and maintenance, Easy access to replacement parts; screens, cutting blades, and drive belt included One of the greatest advantages of the ChunkMaster 400 grinder is the continued availability of replacement parts. Many mechanical components remain compatible with later CFS MaxiGrind and GEA MaxiGrind series, and independent manufacturers continue to offer OEM replacements—which significantly facilitates the long-term operation and servicing of this machine.

Condition: used, Year of construction: 2006, overall weight: 16,000 kg, maximum load weight: 12,400 kg, empty load weight: 3,600 kg, loading space width: 2,460 mm, loading space length: 7,200 mm, loading space height: 2,400 mm, Equipment: cooling unit, GERMAN DEALER offers: Schmitz BDF refrigerated box trailer Carrier 850 unit in working order new battery 2 rows for locking bars skirt board 16,000 kg GVWR 3,600 kg unladen weight Year of manufacture: 05/2006 Interior dimensions: 7200x2460x2400 mm Many swap bodies and chassis are in stock! ##### Ledpfx Ae Aa Nw Tohaeah DELIVERY IS POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * with angled front corners approximately 45° and rear slope approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick, extendable loading platform Loading platform * extendable design with rear slope approximately 1,000 mm x 8° * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, diamond plate flooring over the axles Kingpin supports * JOST kingpin supports (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Tires * 235/75 R 17.5 3PMSF * TPMS: TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. * For correct display, the tractor unit must be able to transmit and display this data. Axles * BPW axles and suspension, 2 fixed axles, 1 steerable axle * Technical axle load: 12,000 kg each * Electro-magnetic parking brake activated via reverse gear and manually Air suspension * with lifting and lowering valve Braking system * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting * Complete steel construction automatically blasted with a shot blasting system after welding * Second blasting with corundum for optimal adhesion of the coating system * Final painting with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red * in accordance with the RAL system 841GL * Rims in silver gray * Rear section metallic and in RAL 9010 (pure white) * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Included accessories * Axle tool * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * Mounting in the rear area of the gooseneck for aluminum loading ramps Laedpfxjz N Nwyo Ahaeh * Galvanized folding supports under the slope of the loading platform * One mounting for warning signs on the gooseneck and on the rear panel, left and right * including socket loadometer for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized locking strips are removable. (Length of the superstructure approx. 2,560 mm) * A toolbox galvanized, integrated in the angled gooseneck * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' cont

Condition: refurbished (used), Year of construction: 2009, Benier MS 500 bread moulder,The MS500 moulding system is specially designed for dough consistencies, which have to be degassed for a fine regular internal crumb structure. White, wheat, wholewheat or all other type of flours can be processed each with their own moulding settings in order to achieve the optimum result. equipped with a teflonised infeed hopper in order to centralize the dough pieces Laodpfszfld Nsx Ahaeh stainless steel curling net between moulding head and pressure board pressure board with v-shaped pattern and independently adjustable side guides weight range 50-1200 grams output max 2200 pcs/hr moulding length min. 130 mm – max. 450 mm year of build 2009

Condition: used, Demo machine The professional brushing machine for finishing surfaces, fine sanding, structuring, ultra-fine sanding, and other final operations. The surface finish depends on the tools used. Standard features: - Independent height adjustment for the 1st and 2nd units - 2 height-adjustable rubber-coated pressure rollers - Scale with roller height display - Electrically adjustable roller height - Machine complies with CE regulations Technical data: Lajdpfx Asvr I Rvshajh Working width: 400 mm Max. tool diameter: 300 mm Clamping shaft diameter: 40 mm 2 feed speeds: 4.5 / 9 m/min Motor output S1 at 100%: 5.5 HP (4 kW) Max. workpiece height: 300 mm Working roller speed: 1140 rpm Machine dimensions (L x W x H): 1700 x 1000 x 1750 mm Brush diameter: 120 – 300 mm Machine weight: 655 kg Equipment on request. Extras not included in the price. (Representative image)

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Ljdpfsy Dr Hdex Ahasah Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Gooseneck: Gooseneck with angled front corners at approximately 45° and rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring approximately 30 mm thick Loading platform: Double-extendable design with rear slope of approximately 500 mm x 8°. 6 pairs of lashing rings that fold outwards (LC 5,000 daN) 4 pairs of lashing rings that fold outwards (LC 10,000 daN) 1 pair of lashing rings horizontally at the front of the loading platform (LC 10,000 daN) 1 intermediate table, approximately 250 mm Hardwood flooring approximately 48 mm thick, checkered steel plate over the axles Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles: BPW axles and suspension; all axles hydro-mechanically steered. Technical axle load: 12,000 kg each Air suspension with lifting and lowering valve Axle tool Tires: Tires 245/70 R 17.5, load index (146/146 F) Brand of our choice Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for an approximate lifting capacity of 24 tons (approximate test load of 50 tons) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and durable corrosion protection High-quality 2-component (2K) topcoat, single color in RAL 3002 carmine red Rear section metallic and painted in RAL 9010 (pure white) Steel structure: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Lajdpfx Asz Sh Htehash Electrical system: Electrical system in accordance with EU regulations Lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connecting bar with 24N, 24S & 15-pole sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Including the following additional equipment: 2-inch kingpin Galvanized steel front wall, approximately 400 mm high Yellow-red air couplings on the galvanized front connecting bar A spare wheel holder in front of the front wall Electro-hydraulic unit Rear steering from front and rear, operable via cable remote control with pushbuttons, with single-axle steering control (without installation in the tractor unit) Mounting on the rear area of the gooseneck for aluminum ramp plates Mounting rail for aluminum ramp plates at the rear of the vehicle Galvanized folding supports under the slope of the loading platform Aluminum side walls and rear wall on the gooseneck, plug-in design, approximately 2,440 x 400 mm (L x H) The rear galvanized plug-in edges are removable (overall length approximately 2,560 mm) A galvanized toolbox, integrated into the angled gooseneck 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or a 45' container 8 pairs of pocket holders for plug-in edges approximately 100 x 50 mm in the outer frame of the loading platform Extensions galvanized, extendable by approximately 230 mm on each side Sliding mounting rails for aluminum ramp plates at the rear of the vehicle 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and removable protection around the pump 2 LED reversing lights mou

Condition: used, functionality: fully functional, machine/vehicle number: WSK00000001260445, empty load weight: 5,820 kg, maximum load weight: 26,680 kg, overall weight: 32,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 18,000 kg, permissible axle load (axle 2): 18,000 kg, first registration: 08/2011, loading space volume: 25 m³, total length: 8,640 mm, total width: 2,550 mm, total height: 3,570 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Attention: archive images! The vehicle may currently be in use! #Chassis tipper semi-trailer - Fine-grain steel welded construction - 2 drop-leg landing legs with round feet - 2 wheel chocks with holder - Rear underrun protection, folding - Half-shell mudguards on all axles - Anti-spray mudflaps on last axle only - 1 aluminium hook-on ladder with holder, at the side - 1 shovel #Axles + suspension - Disc brake axles - Air suspension #Braking system - 2 non-interchangeable coupling heads at front, without connecting line Lajdpfxjz Tzqye Ahaoh #Wheels and tyres - 385/65 R22.5", make at manufacturer's discretion - Steel rims, make at manufacturer's discretion #Electrics - Multi-chamber lights, amber LED side lighting - 2 white/red outline marker lights at rear - 2 x 7-pin sockets at front, without connecting cable - 2 additional LED work lights at rear #Hydraulics - High-pressure cylinder - Hydraulic operation via truck PTO - Hydraulic connection with hose #Bodies - Steel half-pipe body, inclined front wall with hydraulic cylinder mount, internal access steps on the right in direction of travel - Rear wall as pendulum tailgate - Cramaro sliding cover "Cabriole", automatic rear closure as folding bow. Cover structure begins ahead of the body opening. Cover with electric drive, tractor unit socket supplied loose, operation on the semi-trailer and by radio remote control. Note! Outer width of 2550 mm is exceeded by cover attachments. This is accepted in most EU countries! Observe the registration regulations of the respective country #Paintwork - Frame: grey - Landing legs: black coated - Body: yellow with lettering - Cramaro cover: yellow

Condition: new, Year of construction: 2024, functionality: fully functional, Stationary universal stable machine platform, made of folded steel profiles for industrial use. industrial use. It has an oil drip tray and can be moved with a standard pallet truck. The platform therefore offers a wide range of possible uses. Anti-slip steps have been installed to ensure that the platform can be walked on and off safely. To achieve a comfortable working height, our platforms are available with different standing heights. The height can also be finely adjusted using the adjustable feet. Available standing heights without banisters: - Standing height 480mm - Standing height 570mm The platform has a dimension of 101x93cm As standard, the platform comes in the color RAL 7015 with a coarse structure. However, various RAL colors are available on request. For any special requests, please contact us by e-mail with your request. Ledpfoupy Hyox Ahaoah Depending on the application, the work platform can be adapted to your needs using our various storage modules. The storage modules are available from us separately so that you can put together your own platform. Note: Some of the pictures contain special accessories that are available separately from us (e.g. the shelves)

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 880 mm, travel distance Y-axis: 1,360 mm, travel distance Z-axis: 700 mm, table width: 1,110 mm, table length: 1,610 mm, overall weight: 12,500 kg, number of axes: 4, This 4-axis OPS INGERSOLL Gantry Eagle 1200 Plus was manufactured in 2014. It features a robust weight of 12,500 kg and includes a rotary tool changer magazine with multiple electrode holders. If you are looking to get high-quality die-sinking capabilities, consider the OPS INGERSOLL Gantry Eagle 1200 Plus machine we have for sale. Contact us for further details. Ledez Nhklopfx Ahajah - Control system: Eagle Powertec PC/NC Steuerung 3060 (22" Touchscreen display, Multiprog Powertec technology programming, Powertec 2 Easy Burn fast programming, Powertec Handheld, Ethernet and USB interfaces, MultiControl light remote maintenance)- Fine finishing generator: Eagle Powertec PT60- Z-axis speed: Eagle Power Jump with 18 m/min interval speed in Z-axis- Travel X / Y / Z: 880 x 1360 x 700 mm- Distance table / chuck min./max.: 440 / 1140 mm- Worktable dimensions: 1110 x 1610 mm (table clamping surface recessed 50 mm compared to standard)- Dielectric height: 960 mm (Option: 1000 mm)- Special telescopic working tank (W x L x H): 1140 x 1640 x 1040 mm- Max. head load: 300 kg- Additional dielectric fluid capacity: 2000 l (Total 4800 l with extra tank and connecting hoses)- Electrode changer: EW30 (30-fold) / 13-fold base unit- Measuring system: Linear measuring system in X and Y-axis (already included in Z-axis)- Electrode clamping system: Hirschmann H5000 / Minifix (H8.11.20)- Energy saving function: ECOTEC- Flushing: Programmable pressure flushing, manual suction connection- Filter system: 32 m² paper candle filter- Cooling: Compressor re-cooling unit- Main voltage: 400 V3~ / 50Hz- Control voltage: 24 VDC- Max. fuse: 32 A- Power consumption: 20 kVA- Total weight: approx. 12,500 kg (Machine base: 10,000 kg, Gantry/Portal: 2,500 kg, Extra tank: 1,100 kg)- Additional features: C-axis without chuck, CO2 fire extinguishing system, T-slot plate for large electrode mounting, machine shoes, preparation for external erosion mist extraction nozzle, fire damper, structural paint finish in Cobalt Blue (RAL5013), Telegrey (RAL7045), and Rape Yellow (RAL1021)

Condition: new, Year of construction: 2026, CORMAK STU75 Metal Belt Grinder The CORMAK STU75 Metal Belt Grinder is an industrial belt grinding machine designed for a wide range of metal finishing applications, including surface grinding, edge finishing, and processing cylindrical components such as pipes and tubes. Thanks to its powerful motor, two-speed belt operation, and carefully engineered working system, the STU75 provides high efficiency, precision, and reliability for everyday industrial use. Key Features Adjustable belt speed: 14.5 / 29 m/s – allows the grinding speed to be matched to the material type and required surface finish quality. Quick belt and abrasive tool replacement – reduces setup times and improves workstation productivity. Grinding head adjustable for vertical and horizontal operation – provides excellent flexibility and enables machining of various workpieces at the optimal angle. Pipe vise with 0–30° angle adjustment – allows precise angled grinding of cylindrical components, ideal for pipe preparation before welding. Complete set of pipe rollers for different diameters – enables quick setup for grinding pipes with diameters up to 60.3 mm. Heavy-duty vibration-damping construction – improves grinding accuracy and operator comfort during extended operation. Construction and Technology Lodpfxjvu Ukzj Ahaoah The CORMAK STU75 belt grinder has been designed for versatile operation in demanding industrial environments. Equipped with a Ø200 mm rubber-coated drive wheel and a 120 × 90 mm sliding support with rollers, the machine ensures smooth belt guidance and consistent contact between the abrasive belt and the workpiece. The integrated roller guidance system combined with a spring-loaded belt tensioning mechanism provides safe, stable, and smooth operation of the sanding belt. The rigid construction minimizes vibration, improving both machining accuracy and working comfort. Precision and Performance The combination of a wide 75 × 2000 mm abrasive belt and two selectable grinding speeds ensures excellent performance for both heavy stock removal and fine finishing operations. The adjustable pipe vise and dedicated roller set enable precise tube grinding with repeatable results and stable workpiece positioning. Applications The universal CORMAK STU75 Metal Belt Grinder is suitable for: Manufacturing handrails, balustrades, and steel pipe structures Edge and surface preparation before welding or painting Metalworking departments, tool rooms, and industrial service workshops Small and medium-sized production lines Standard Equipment Ø200 mm rubber-coated drive wheel Sliding support with 120 × 90 mm rollers Pipe grinding vise with 0–30° angle adjustment Roller set for pipe diameters: 20 mm 21.3 mm 26.9 mm 33.7 mm 42.4 mm 48.3 mm 60.3 mm Abrasive belt 75 × 2000 mm Technical Specifications Belt speed 14.5 / 29 m/s Abrasive belt dimensions 75 × 2000 mm Power supply 400 V Motor power 2.2 kW Weight 110 kg Maximum pipe grinding diameter 60.3 mm

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, wire diameter (max.): 0.3 mm, table load: 3,000 kg, controller manufacturer: MITSUBISHI, controller model: MV-4800, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15" touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details. - Travel (U, V): ±100 mm- Maximum Workpiece Dimensions: 1200 x 1020 x 505 mm- Maximum Workpiece Weight: 3000 kg- Table Base: Closed mounting base, 4-side hardened frame table- Drive System: Tubular direct drives in X/Y axes, Optical Drive System (ODS)- Measuring System: Linear scales in X, Y, U, V axes- Wire Threading: Intelligent AT - Automatic wire threading without water jet (for wire diameter 0.15 - 0.3 mm)- Wire Station: 20 kg wire station- Control Unit: MITSUBISHI ELECTRIC ADVANCE M700 with 15" Touch Screen- Control Features: 3D CAD/CAM on board, 10 GB user hard drive, ESPERADVANCE dialog system, 3D Parasolid import, 3D graphic check, Hand pilot- Control Interfaces: Ethernet TCP-IP, 2 x USB Port, prepared for mcAnywhere- Generator & Processing Technologies: - PFC (Precise Finish Circuit) high-speed sensing - HSS-AE Anti-Electrolysis Generator - ECONO CUT wire consumption reduction - POWER MASTER process safety system - CORNER MASTER³ radius shaping - ORBIT MASTER circular machining - DIGITAL AE II parallelism optimization - SL-CONTROL for height steps - TS-MASTER for homogeneous surface structures- Equipment: Automatic fine hole search, Easy 3D-Setup, Wire alignment block, Wire chopper, Compressor cooler, E.KO IONISER Laodpfxoz Nk T Ne Ahaoh