Used Pressbrake for sale (308)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Staufenberg
7,804 km
SPECIAL ACTION Pressbrake
DurmaAD-S 30175 mit Winkelmesssystem
Call
Year of construction: 2024, condition: new, The DA-69T controller offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product.
Delem-69T properties:
- 3D and 2D graphic touch screen programming mode
- 3D representation in simulation and production
- 17-inch TFT colour display with high resolution
- Complete Windows Application Suite
- Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface
- Open system architecture
- Bending and correction interface sensor
- Profile-T3D offline software
- great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too!
AD-S 30175 with Y1, Y2, X and R axis
Bending force: 175 tons
bending length: 3050mm
Passage between stands: 2600mm
Rapid speed: 120 mm / sec
working speed: 10mm / sec
Speed of the return: 100 mm / sec
Installation height of tool passage and the penetration depth of your press brake: 30mm
table width: 104mm
table height: 900mm
stroke: 265 mm
Ksdpfx Ajd Tpadjb Tslp
Projection: 410 mm
Support arms: 2 pcs.
Stop finger: 2 pcs.
Press force and speed of the press brake. X - axis: 500 mm / sec
x-axis travel direction 650mm
Speed R axis max.: 350 mm / sec
R axis travel direction 250 mm
Engine power: 18.5 kW
Oil tank capacity: 250 litres
length 42
Listing
Staufenberg
7,804 km
SPECIAL ACTION Pressbrake
DurmaAD-S 30220
Call
Year of construction: 2024, condition: as good as new (ex-display), Bending power 2200 KN
Bending length 3050 mm
Passage between d. stands (mm) 2600 mm
Stroke length (mm) 265 mm
Extension 410 mm
Installation height 530 mm
Operating speed Y (mm/sec) 10 mm/sec
Engine power 18.5 KW
Operating speed X (mm/sec) 500 mm/sec
Operating distance R (motorized) 350 mm
Length 4250 mm
Width 1700 mm
Height 2750 mm
H7s8pkvti
Weight 11500 kg
Standard:
Y1, Y2, pressure bars - axes (individually controllable)
X-, R - axes CNC controlled.
Control Unit - ModEva 19T
Servo motor rear stop & linearly guided ball circulation spindle system (X-R) (AL)
CNC-controlled bombing
European tool clamping system
Movable support arms (with T-slot and stopper)
Specially designed hydraulic block and valves according to worldwide standard
electrical equipment according to worldwide standard
Optional:
Bending - upper tool H=66.5 ( one of them in division )
Bending - Subtool 4V The ( one of them in division )
D-Bend 3D CAD/CAM Import & Simulation Program
The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg.
Vsiqjq
Further machines are ready for demonstration in Staufenberg.
On request, we will be happy to provide you with further information.
Kodpfx Asd R Elceb Telp
Listing
Staufenberg
7,804 km
SPECIAL ACTION Pressbrake
DurmaAD-R 30220
Call
Year of construction: 2024, condition: new, Make: DURMA
Type: AD-R 30220
bending length: 3050 mm
Press force: 2200 kN
Control: CNC DT-10
Operating hours: 0 h
Controlled axes Backgauge: X,R
passage between the uprights: 2600 mm
stroke length: 265 mm
Installation height: 530 mm
table width: 104 mm
table height: 900 mm
Stands projection: 410 mm
travel range X-axis: 650 mm
traverse speed X-axis: 250 mm/s
Infeed speed: 140 mm/s
folding speed: 10 mm/s
retraction speed: 140 mm/s
Dimensions L/W/H: approx. 4250x1770x2900 mm
Weight: approx. 12250 kg
Standard equipment
Y1,Y2, X=650 mm
Control: CNC DT-15
European tool clamping system
60 mm die holder (only for European die system)
Klsdpfx Ajd Srk Eob Top
2 support arms movable from the front with linear guidance along the entire length
Backgauge motorized with linear guide & ball screw
Backgauge finger height adjustable
Back stop motor Servo
Safety covers lateral
CE Marking
Extended equipment
Safety system CE with manual FIESSLER AKAS II M-FPSC-B-C+ safety cover & switch
Controlled axes X,R-axis, Z-axis manually adjustable
Quick clamping
CNC controlled motor-driven crowning
The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg.
Further machines are ready for demonstration at our premises in Staufenberg.
We will be happy to provide you with further information on request.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Staufenberg
7,804 km
SPECIAL ACTION Pressbrake
DURMAAD-S 30175
Call
Year of construction: 2024, operating hours: 33 h, condition: new, Machine Dimensions:
• (L x W x H): 4,250 mm x 1700 mm c 2750 mm
Technical data:
Bend length: 3,050 mm
Kodpfx Aodx Nm Tsb Tolp
Free stand passage: 2,600 mm
Control: CNC ModEva 19T
Controlled axes rear stop: X, R (Z, Optional)
Stroke length: 265 mm
Installation height: 530 mm
Table width: 104 mm
Table height: 900 mm
Stand extension: 410 mm
Travel range X-axis: 650mm
Travel speed: X-axis: 500mm/s
Delivery speed (Y): 160 mm/s
Bending speed: (Y): 10mm/s
Working speed: (R): 350 mm/s
Travel range R-axis: 250 mm
Hydraulic oil volume: 200l
Engine power: 18.5 kW
Weight: approx. 10,500 kg
Basic equipment:
Controls: Cybelec ModEva 19T
CNC-controlled bombing
Clamping system above: Durma (europ.)
Clamping system bottom: 60mm - holder
Rear stop: AC Servo motors with ball-circuit spindle
Options include:
Fiesseler Security System AKAS ll - FPSC-B-C
Top tool buttoned: P97.75.R08 (one in split)
Subtool, multiple die (die widths 16/22/35/50mm)
The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg.
Further machines are ready for demonstration in Staufenberg.
On request, we will be happy to provide you with further information.
Listing
Ahaus
7,617 km
Hydr. pressbrake
HACOPPM 30.200
Call
Condition: ready for operation (used), Year of construction: 2002, pressure 200 t
chamfer lenght 3100 mm
distance between columns 2550 mm
stroke of upper beam 200 mm
throat 300 mm
dayligth 440 mm
working feed 9.0 mm/sec
return speed 80.0 mm/sec
265 bar
Kodpfxsyu U A Us Ab Telp
Control konv.
work height max. 965 mm
total power requirement 15.0 kW
weight 10500 kg
range L-W-H 3360 x 1750 x 2800 mm
Equipment:
- simple / conventional electro-hydraulic press brake
- pivoting operation, front left
- electric, infinitely variable depth adjustment (Y1 Y2 axis)
* Torsion shaft for parallelism
- Electro-motorized backgauge (X axis)
* with handwheel for fine adjustment
* on recirculating ball screws
* 2x manually adjustable stop fingers
- manual (jog mode) and automatic cycle selector switch
- manual table crowning
- split set of roe foot upper tools ... H = 210 mm
- 1x as good as new universal V-die block, reversible
* with anti-corrosion grease
* V openings in mm : 12/35/25 50 10/20/16/16 75
* Dimensions of the block in mm : 100 x 100
- 1x 1V die (continuous) - V opening in mm : 100
- various / further bending tools
- 1x free-moving 2-hand/foot control
- Operating instructions (PDF)
Listing
Ahaus
7,617 km
Hydr. pressbrake
JHLHOL-30 NC/800
Call
Condition: ready for operation (used), Year of construction: 2007, pressure 30.0 t
chamfer lenght 800 mm
back stop - adjustable max. 420 mm
stroke of upper beam 100 mm
dayligth 310 mm
working feed 10.0 mm/sec
return speed 12.0 mm/sec
Control VISION 120
oil volume ca. 38.0 l
voltage 380 V
total power requirement 4.5 kW
weight of the machine ca. 890 kg
dimensions of the machine ca. 1250 x 950 x 1900 mm
current new price approx. 24.000 euros
special price on request
Equipment:
- electro-hydraulic NC press brake - easy to operate
- UNITRONICS "VISION 120" NC control system
* for press depth back gauge (Y X axis)
- NC electro-motorized back gauge (X axis)
* Input of target/actual value possible
* 2x manually adjustable stop fingers
- Operation front right
- Many different insert/bending tools
* Top tool holder : AMADA/PROMECAM
- 1x freely movable foot switch
Klodsyuzchjpfx Ab Tep
- EMERGENCY OFF button at the front
- Rear safety device
- operating instructions
Listing
Austria
8,197 km
Hydr. pressbrake
LVDPPI 320/45 MNC95
Call
Condition: used, Year of construction: 1993, pressure 320 t
chamfer lenght 4500 mm
distance between columns 3760 mm
max. ram stroke 250 mm
distance table - lower edge of ram 510 mm
throat 300 mm
Ksdpeyvkvuefx Ab Tslp
closing speed 80 mm/sec
working feed 6,8 mm/sec
return speed 70 mm/sec
total power requirement 25 kW
weight of the machine ca. 22,5 t
dimensions of the machine ca. 6,4 x 2,3 x 3,5 m
Listing
Birmingham
7,072 km
Cnc pressbrake
BystronicXact 160
Call
Year of construction: 2012, condition: excellent (used), Used modern, very clean & fully serviced Bystronic Xact 160 3metre x 160ton cnc pressbrake for sale:
Model: Xact 160
Make: Bystronic Xact Smart 160
Year 2012
Cybelec 880S cnc control
Working length mm: 3100mm / 3metre
Max. press force kN: 1600 / 160ton
2 axis back gauge – R and X axis
4 axis in total
Max.stroke mm: 200
Kedpfjn E Tryjx Ab Tjlp
Rapid approach mm/s: 100
Working speed mm/s: 1-10
Return speed mm/s:95
With crowning
Weight kg 9800
Machine will come with tooling
Listing
Birmingham
7,072 km
4m x 180ton cnc pressbrake
TRUMPFTruBend 3180
Call
Year of construction: 2013, condition: good (used), Used modern, fully serviced Trumpf TruBend 3180 4metre x 180ton 6 axis down stroke hydraulic cnc pressbrake for sale
Make: Trumpf
Model: TruBend 3180 series 3000
Capacity: 4metre x 180 ton
Year: 2013
Axis: 6axis – y1, y2, x, r, z1 and z2 axis
Tonnage: 1800kn / 180ton
Stroke: max 200mm
Kjdpfx Abenyihuj Telp
Brake time: max 60mm
Listing
Birmingham
7,072 km
PressBrake
Trumpf Trubendtrubend 3120
Call
Year of construction: 2010, condition: like new (used), Used Trumpf Trubend Series 3000 CNC pressbrake for sale
VIDEO BELOW:
Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis plus pressbrake for sale.
Brand/make: TRUMPF
Model: TRUBEND 3120
Type: CNC hydraulic Press Brakes
New 2010
Location: United kingdom
Low hours – 14,000
Specification
Convert Specs to Imperial
Tonnage 119.749 t / 120ton
Type: hydraulic downstroke
Overall Length 3.1 m /3metre
BH 2.7 m
Stroke 199.9 mm
Number of axis: 7 axis
5 axis back gauge
Weight 18298 (LBS)
Control CNC (T3000)
132 Ton X 10′ Trumpf TruBend 3120 CNC Press Brake
Year: 2010
Klsdpfx Ashtm Ikeb Top
Specification from new:
Machine
– Stable machine frame as welded all-steel construction
– Ram, highly resistant to torsional forces
– Spherical ram suspension, with ram tilt
– Electro-hydraulic downstroking drive with 4-cylinder technology
– Proportional valve technology
– Modern block hydraulics
– Electronic pressure balance
– Measuring system with glass scale and frame deflection compensation
– Hydraulic oil filled in the machine (lifetime lubrication)
– Oil cooler
Backgauge System
– Backgauge system 2-axes with rack and pinion-drive for X- and R-axis,
– 2 pieces back gauge fingers with safe adjustment in front of the machine
Tool Holder
– TRUMPF Upper tool clamping, manual and hardened
– Lower tool clamping, manual and hardened
Crowning
– Self-regulating crowning system
– Additional hydraulic CNC-crowning
Control
– Machine control: T3000 colour, DELEM based on Real Time for Windows
– USB interfaces for keyboard, mouse, etc.
Safety
– Footswitch for Emergency up, down and emergency stop
– Safety equipment: Side doors and manual shutter roller at the rear
Services
– Installation, start-up and instruction
Options for Backgauge System
– Back gauge system 5 axis
Options for Tool Holder
– Amada US Style fast clamping of upper tool holders (segmented, on entire working length)
Options for Safety Device
– BendGuard
Options for Material Handling
– Support bracket (2 pc)
Delivery
– June 2011
Video below:
Used Trumpf V and C series cnc pressbrakes also available in stock for sale.
We are always interested in buying used Trumpf pressbrakes and machines such as:
TruBend 3066 TruBend 3100 TruBend 3170
TruBend Series 5000
TruBend 5085 Trubend 5130
TruBend Series 7000
TruBend 7050 TruBend 7036 TruBend 7050
TruBend Series 8000
TruBend 8230 Trubend 8400
Listing
Birmingham
7,072 km
Cnc pressbrake
BystronicXcite 80e
Call
Year of construction: 2014, condition: good (used), Used quality modern 2014 BYSTRONIC Xcite 80e electric belt driven cnc Press Brake for sale
High specification and highly accurate Cnc downstroke pressbrake for sale
Bed length 2metre / 2050mm
Year / new: 2014
Model: Xcte 80 e
Capacity / tonnage: 80ton
Complete Bystronic Byvision touch screen control
5axis back gauge
Max stroke 150mm
Fully serviced with Bystronic uk
Kledpfxjnr Rrzs Ab Top
Listing
Birmingham
7,072 km
Cnc Pressbrake
BystronicEP 100
Call
Year of construction: 2007, condition: like new (used), Used fully serviced Bystronic AFM EP 100 3metre x 100ton cnc pressbrake for sale:
Model: Afm Ewards Pearson 100
Make: Bystronic
Year 2007
Cybelec 880s control
Ksdei Egmlepfx Ab Telp
Working length mm: 3100mm / 3metre
Max. press force kN: 1000 / 100ton
2 axis back gauge – R and X axis
4 axis in total
With crowning
Machine will come with a set of upper & lower tooling
Listing
Birmingham
7,072 km
Press brake
Bystronicafm pressbrake
Call
Condition: excellent (used), Year of construction: 2007, Used fully serviced Bystronic AFM EP 100 3metre x 100ton cnc pressbrake for sale:
Model: Afm Ewards Pearson 100
Make: Bystronic
Year 2007
Cybelec 880S control – popular control
Working length mm: 3100mm / 3metre
Max. press force kN: 1000 / 100ton
Max stroke 200mm
Bending cycle 1-10 mm/s
Rapid approach 100mm/s
Rapid return 95mm/s
2 axis back gauge – R and X axis
4 axis in total
With crowning
Delivery, installation and training can be arranged
Klsdpfx Aer T Erujb Tep
Listing
Birmingham
7,072 km
PressBrake
Edwards PearsonPR6
Call
Year of construction: 2000, condition: like new (used), Used Edward Pearson pr6 100ton x 4metre multi axis cnc pressbrake for sale
Pr6 100/4100
Make: Edwards Pearson
Model: PR 6 Pressure Reference
Year / new: 2000
Total axis:6 – 4axis back gauge X R Z1 Z2 X1 – recently replaced / new amplifiers
Free standing no pit required
Capacity / bed size / tonnage: 4metre x 4100mm x 100ton
Kledpfjg D Uapox Ab Top
Cnc control: Cybelec DNC 1200 PS/B
Fully serviced with Bystronic uk – as attached per photo
Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products.
Delivery to your factory and installation complete with tuition with your operators can be arranged.
Listing
Ahaus
7,617 km
Hydr. pressbrake
BERNARDOAKPL 1600 x 40
Call
Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t
chamfer lenght 1600 mm
distance between columns 1200 mm
column arm 200 mm
ram stroke speed 60.0 mm/sec
return speed 80. mm/sec
work speed 60.0 mm/sec
work stroke 100 mm
table height 760 mm
table width 150 mm
oil volume 130 ltr.
voltage 400 Volt
Control ESA E21
total power requirement 4.0 kW
weight 3030 kg
range L-W-H 2050 x 1800 x 2030 mm
Demonstration/demo machine (!!)
From our showroom (like new)
With very few operating hours
Furnishing:
- compact hydraulic press brake
- BERNARDO NC control model E21
- swiveling control panel
- electrical adjustment of the backgauge
- Back stop on recirculating ball spindles
- electrical adjustment of the immersion depth
- Laser protection device in front
- Upper deer foot tool - divided
Kedpfxjxabumo Ab Tslp
- Tool holder with quick change system
- Universal die block
- side + rear protective device
- 2x front support arms
- movable double foot switch (operation)
Listing
Ahaus
7,617 km
Hydr. pressbrake
DERATECHULTIMA PLUS 160/4100
Call
Condition: ready for operation (used), Year of construction: 2010, pressure 160 t
chamfer lenght 4100 mm
distance between columns 3600 mm
column arm 400 mm
ram stroke speed 200 mm/sec
work speed 10.0 mm/min
return speed 165 mm/sec
work stroke ca. 350 mm
dayligth ca. 660 mm
oil volume 450 ltr.
table height 830 / 950 mm
table width 75.0 / 60.0 mm
voltage 400 Volt
total power requirement 18.5 kW
weight 13440 kg
range L-W-H 5150 x 2050 x 3150 mm
current new price approx. 90.000 euros
special price on request
-----
Ksdpoxaambefx Ab Tolp
ULTIMA PLUS electro-hydraulic press brake with:
* increased installation height .. approx. 660 mm
* increased cylinder stroke .. approx. 350 mm
-----
- in checked condition - machine video -
?v=chgCaXLnpa8
Equipment:
- CNC electro-hydraulic die/press brake
- CYBELEC CNC control "DNC 880 S"
* swiveling control panel, front right
* 2D graphic programming & product display
* tool & program library
- CNC controlled axes: Y1 + Y2 + X + R axis
- CNC electro-motorized back stop, with ball screws (X axis)
- CNC electro-motorized Height adjustment of the stop beam (R axis)
- 2x manually adjustable back stop fingers (Z axis)
- 2x front, movable support arms with T-slot ("Sliding System")
- 1x set of bending/insert tools
* AMADA / SYSTEM A tool system
- Laser protection device in front of the machine
- Safety device behind the machine (door)
- 1x freely movable foot switch
- original operating instructions
Listing
Austria
8,415 km
Hydr. pressbrake
HESSE by DURMAAD-S 60400
Call
Condition: new, neu
ca. 14 - 16 Wochen ab Auf
Türkei
197600 €
3734.64 €
400 to
6050 mm
3
365 mm
5100 mm
510 mm
630 mm
hydraulisch
120 mm/s
8 mm/s
100 mm/s
750 mm
350 mm/s
300 mm/s
250 mm
1220 mm
154 mm
500 l
37 kW
7500 mm
2110 mm
3810 mm
34660 kg
3 axes (Y1, Y2, X)
CNC control DT-15
- 2D grafic display 15"
- intuitive touch-screen control (simple drawing of the bending outline with your finger)
- user friendly programming in dialogue form
- automatic calculation of the bending sequence
- automatic calculation of the blank sheet size
- graphic product and tool memory
- correction possibility
- USB interfaces for backup and programm transportation
- PC software, generating programms on the PC and transfer to the machine by USB
Ksdpjyui R Tefx Ab Telp
servo motorized back gauge on linear guides and ball screws
back gauge finger blocks on double linear guides
CNC crowning table
upper tool 1010 / A / 75 °, devided and cranked
4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
laser safety device Fiessler AKAS mounted on the upper beam
linear guided sheet support arms
according to CE rules
oilfilling
users manual in English or German
ADVANTAGES OF AD-S COMPAIRED TO PBF:
- more stroke, installation height and throat
- higher approach and retraction speed of the top beam
- higher backgauge speed
- backgauge finger on double instead of single linear guide
- more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes),
bending aids, laser angle measuring system, tandem design, other CNC controls ...
PRICE FCA TÜRKIYE
OPTIONS (PRICES ON REQUEST):
R-axis
R/Z1/Z2-axes
DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import)
CNC Control Delem DA66 S
CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option
Hydraulic tool clamping systems
Listing
Niederlangen
7,585 km
Hydr. pressbrake
TRUMPFTRUMABEND V 130
Call
Condition: used, Year of construction: 2001, pressure 130 t
chamfer lenght 3060 mm
distance between columns 2690 mm
column arm 410 mm
stroke 365 mm
dayligth 535 mm
ajustment speed 200 mm/sec
working feed 1.0 - 10.0 mm/sec
return speed 135 mm/sec
table width 120 mm
table height 1050 mm
tiltable up to +/- 10.0 mm
Number of working hours ca. 31.800 h
compressed air 5.0 - 7.0 bar
oil volume 250 l
operating pressure 340 bar
voltage 400 V
total power requirement 23.0 KVA
weight of the machine ca. 12950 kg
range L-W-H 3660 x 2310 x 2900 mm
Equipment:
- CNC electro-hydraulic folding/die bending press
- DELEM CNC control - swiveling front left
* High-resolution graphic screen
* Clear, concise menus in the operator's language
* Large tools and products library
* Graphical 2D programming
* automatic bending sequence calculation and collision detection
* EMERGENCY stop button at the front
Klsdpoyn R Hvefx Ab Top
- CNC axis adjustment:
* Y1 - Y2 - X - R axis CNC crowning
* Manual adjustment of the 2x stop fingers, from the front (Z axes)
- CNC electro-motorized table crowning
- CNC electro-pneumatic die displacement (I axis)
- WILA / TRUMPF upper tool clamping - hydraulic
- WILA / TRUMPF lower tool clamping - hydraulic
- 2x front, robust support arms - movable
- 1x freely movable 2-hand/foot control
- 1x free-moving foot switch
- Lateral safety device (hinged doors)
- rear safety device (sliding doors)
- original operating instructions ( french )
Listing
Niederlangen
7,585 km
Hydr. pressbrake
LVDPPI 135/40 MNC
Call
Condition: used, Year of construction: 1995, pressure 135 t
bevel length 4000 mm
distance between columns 3150 mm
column arm 270 mm
total power requirement 15 kw
dimensions 4030 x 1440 x 2420 mm
machine weight ab. 9500 kg
Equipment:
Kedoyn R Hpepfx Ab Telp
- MNC 10 control unit
- Electric backgauge ( X )
- Positioning of the depth adjustment ( Y1 Y2 )
- 2 stop fingers, manually adjustable
- Rear side guard
- Upper and lower tool
Listing
Niederlangen
7,585 km
Hydr. pressbrake
ATLANTICHPT 30/220
Call
Condition: used, Year of construction: 2011, pressure 220 t
chamfer lenght 3100 mm
distance between columns 2600 mm
column arm 300 mm
stroke - stepless adjustable 200 mm
dayligth 450 mm
Control ATL 550
total power requirement 18,7 kW
Kljdpjyn R Hisfx Ab Tjp
weight 11500 kg
range L-W-H 3500 x 1900 x 2800 mm
Equipment:
- ATL 550 control unit
- Electric back gauge ( X )
- Positioning of the depth adjustment ( Y1 Y2 )
- 2 stop fingers, manually adjustable
- Rear side guard
- Upper and lower tool
Listing
Niederlangen
7,585 km
Hydr. pressbrake
ALPMACB 220-4100 // GREEN ECO
Call
Condition: new, pressure 220 t
chamfer lenght 4100 mm
distance between columns 3600 mm
column arm 410 mm
ram stroke speed 150 mm/sec
work speed 10.0 mm/sec
return speed 140 mm/sec
work stroke 265 mm
dayligth 480 mm
table height 900 mm
table width 110 mm
oil volume 300 ltr.
voltage 400 Volt
total power requirement 18.5 kW
weight 15000 kg
range L-W-H 5000 x 2400 x 2850 mm
ALPMAC Manufacturer Video:
?v=_FxXyPAcxlE
?v=YfkX9RwWv_0
ALPMAC Product Video Model B:
?v=lmT1tfy43WE
-----
MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with:
* increased installation height
* increased cylinder stroke
* increased throat depth
-----
! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)
Klodpeynnk Esfx Ab Tsp
! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY)
! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB)
! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE
! ALUMINUM CAST REAR STOP COMPONENTS
! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW)
! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45)
GREEN ECO Technology: Lower consumption. More quiet. Full control.
! Peak performance with minimal energy consumption
! Maximum power at minimal cost
! Maximum performance when it's really needed
! Main motor is only activated by the foot pedal
! No energy wasted in standby mode
! Controlled start-up process
Equipment:
- CNC electro-hydraulic press brake
- DELEM CNC control model DA-66T- graphics/touchscreen
* 2D graphic touchscreen programming operation
* 3D display in simulation and production
* 17" high-resolution color TFT screen
* Bending sequence calculation
* Product programming and display in actual size
* USB interface
- CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
- CNC electro-motorized backgauge (X-axis)
* on ball screws
* Travel: max. 750 mm
* X-axis travel speed: 350 mm/s
* with 2x CNC-controlled backgauge fingers
- CNC electro-motorized height adjustment (R-axis)
* Travel: max. 250 mm
* R-axis travel speed: 300 mm/s
- CNC electro-motorized table crowning
- ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A"
* including quick-change clamping
* including crowning device in the tool holder
- ROLLERI split universal die block "M 460 R"
* including 1x die shoe "C 1050-R"
- Rear safety device: light barrier
- HAWE hydraulic components
- FIESSLER AKAS laser safety device in front of the machine (incl. FPSC)
- 2x front support arms with sliding system
* easily and keylessly height-adjustable
- FIESSLER freely movable double foot control
- CE marking / Declaration of Conformity
Trust Seal
Dealers certified through Machineseeker

Listing
Niederlangen
7,585 km
Hydr. pressbrake
ALPMACB 175-3100 // GREEN ECO
Call
Condition: new, pressure 175 t
chamfer lenght 3100 mm
distance between columns 2600 mm
column arm 410 mm
ram stroke speed 160 mm/sec
work speed 10.0 mm/sec
return speed 120 mm/sec
work stroke 265 mm
dayligth 480 mm
table height 900 mm
table width 90.0 mm
oil volume 230 ltr.
voltage 400 Volt
total power requirement 18.5 kW
weight 10500 kg
range L-W-H 4100 x 2000 x 2820 mm
ALPMAC Manufacturer Video:
?v=_FxXyPAcxlE
?v=YfkX9RwWv_0
Kjdpfx Aexaa Eqeb Tolp
ALPMAC Product Video Model B:
?v=lmT1tfy43WE
-----
MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with:
* increased installation height
* increased cylinder stroke
* increased throat depth
-----
! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)
! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY)
! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB)
! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE
! ALUMINUM CAST REAR STOP COMPONENTS
! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW)
! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45)
GREEN ECO Technology: Lower consumption. More quiet. Full control.
! Peak performance with minimal energy consumption
! Maximum power at minimal cost
! Maximum performance when it's really needed
! Main motor is only activated by the foot pedal
! No energy wasted in standby mode
! Controlled start-up process
Equipment:
- CNC electro-hydraulic press brake
- DELEM CNC control model "DA-58T" with graphics/touchscreen
* 2D graphical programming
* 15" high-resolution color TFT screen
* Bending sequence calculation
* Product programming and real-size display
* USB interface
- CNC controlled axes: Y1 - Y2 - X - R - crowning
- CNC electro-motorized backgauge (X-axis)
* on ball screws
* Travel: max. 750 mm
* X-axis travel speed: 350 mm/s
* with 2x manually adjustable backgauge fingers
- CNC electro-motorized height adjustment (R-axis)
* Travel: max. 250 mm
* R-axis travel speed: 300 mm/s
- CNC electro-motorized table crowning
- ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A"
* including quick-change clamping
* including crowning device in the tool holder
- ROLLERI split universal die block "M 460 R"
* including 1x die shoe "C 1050-R"
- Rear safety device: light barrier
- HAWE hydraulic components
- FIESSLER AKAS laser safety device in front of the machine (incl. FPSC)
- 2x front support arms with sliding system
* easily and keylessly height-adjustable
- FIESSLER freely movable double foot control
- CE marking / Declaration of Conformity
Listing
Iszkaszentgyörgy
8,588 km
Manual pressbrake
TNMPBB1270/2
Call
Condition: new, functionality: fully functional, Year of construction: 2025, Manual swing bending machine
Very robust design
Maximum bending length: 1270 mm
Klodpfx Asyr If Rsb Top
Maximum bending thickness: 2 mm
Foot pedal operated
Listing
Austria
8,415 km
Hydr. pressbrake
HESSE by DURMAAD-Servo 30175
Call
Condition: new, Year of construction: 2026, neu
2026
080198
Mai 2026, Zwischenverkauf
Türkei
106178 €
1806.84 €
95600 €
175 to
3050 mm
Y1 / Y2 / X / R Achse
265 mm
2600 mm
410 mm
530 mm
hydraulisch
200 mm/s
10 mm/s
200 mm/s
650 mm
500 mm/s
250 mm
900 mm
104 mm
2 x 4 kW
4250 mm
1700 mm
2750 mm
10900 kg
1 SERVO MOTOR AND PUMP PER CYLINDER
Standard accessories:
4 axes (Y1, Y2,X and R)
Color graphics control Delem DA 66 S
- 2D graphical touch screen programming mode
- 3D machine representation, in simulation and production
- 24" high resolution color TFT
- Delem Modusys compatibility (module scalability and adaptivity)
- USB, peripheral interfacing
- User specific application support within the control's multitasking environment
- Sensor bending & correction interface
- Profile-S2D offline software
servo motorized back gauge on linear guides and ball screws
back gauge finger blocks on double linear guides
CNC crowning table
upper tool 1010 / A / 75 °, devidedand cranked
4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
laser safety device Fiessler AKASmounted on the upper beam
Kljdpfxewirtbe Ab Tsp
linear guided sheet support arms
according to CE rules
oilfilling
users manual in English or German
ADVANTAGES OF THIS CONCEPT:
- hydraulic works only while upper beam movement
- low energy consumption
- low noise level
- high speed
OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 16 WEEKS):
CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option
Further options as pneumatic or hydraulic tool clamping on request.
Listing
Dorsten
7,640 km
Hydr. pressbrake
EHTEHP S 320-7250
Call
Condition: used, Year of construction: 1991, pressure 320 t
chamfer lenght 7250 mm
distance between columns 6550 mm
throat 400 mm
ram - range of adjustment 270 mm
stroke 270 mm
table surface area 7250x400 mm
dayligth 560 mm
fence 5-1000 ja /nein
weight of the machine ca. 53 t
Central crowning
Rip fence
Mower adjustment
Die adjustment
Hydraulic ram clamping
Klodpsyt Rxpjfx Ab Tsp
Hand/foot control
The tech. Data are manufacturer or operator information and therefore non-
binding. We reserve the right to prior sale; Our terms and conditions of sale
apply exclusively.
About us More
than 400 of our own machines in stock
Over 15,000 m² of storage space, 70 t crane capacity
More than 10,000 items and accessories for your workshop
If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.
We look forward to your visit.
Your Markus Hirsch Team
We make it easier for you to find: "pressbrake"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Pressbrake (308)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month






































































































































































