Used Press brakes with 0-49t bending force for sale (73)

Condition: used, Year of construction: 2003, pressure 45.0 t chamfer lenght 2050 mm distance between columns 1600 mm column arm 300 mm stroke 150 mm dayligth 395 mm ajustment speed 100 mm/sec working feed 1-10 mm/sec return speed 70,0 mm/sec table width 60,0 mm table height 905 mm oil volume 150 l operating pressure 340 bar voltage 400 V total power requirement 5,5 KW weight of the machine ca. 3500 kg range L-W-H 2900 x 2100 x 2420 mm good / well-maintained condition (!!) - in checked condition - machine video - ?v=f0lMBgZD1VU Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) Csbotyznbou Thl Rsgt - Control instructions (PDF) + machine circuit diagram * Machine link: ?machineno=1008-9308356

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: B0702A0549, Trumpf Trubend 7036 press brake Press force 360 kN/36 t Csbu Thlsu A Dcas Rjgt Bending length 1020 mm 6-axis controlled backgauge BendGuard Graphic control Automatic tool clamping Tool-free

Condition: used, Year of construction: 2021, Outstanding Bystronic press brake with mobile bending robot, both from year 2021. Can be viewed under power upon appointment in France and available for immediate purchase. Full technical description of the machine and list with included bending tools in the attached document. Maximum stroke: 200 mm Working length: 1030 mm Maximum pressure force: 400 kN Csbu Thlowf I Exo Rsgt Machine weight: 4000 kg Operating hours MBR (robot): 4823h Operating hours press brake (1): 7695h

Condition: excellent (used), Year of construction: 2004, Parameter Details Type: CNC hydraulic press brake Press force: 170 t Bending length: 2,550 mm Distance between side frames: approx. 2,050 mm Stroke (Y-axis): 250 mm Working height: 500 mm Cgobu Thjwfgkajl Rot Thrust: 400 mm

Condition: good (used), Year of construction: 2011, Functionality: fully functional, total height: 2,317 mm, pressing force: 36 t, total width: 2,140 mm, total length: 2,740 mm, throat depth: 410 mm, overall weight: 3,600 kg, operating speed: 20 mm/s, distance between stands: 960 mm, bending length: 1,300 mm, retraction speed: 20 mm/s, throat depth of stand: 410 mm, working length: 1,300 mm, input voltage: 200 V, CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Year of construction: 2011 Pressing force: 352 KN Cebu Thewgw Hhsl Regt Table length: 1300 mm Bending length: 1300 mm Distance between uprights: 960 mm Frame depth: 410 mm Maximum stroke: 150 mm Opening: 420 mm Motor power: 200 V with transformer for 400 V Power: 13.2 kVA Total length: 2740 mm Total width: 2140 mm Total height: 2317 mm Machine weight: 3600 kg

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, 4-axis machining center Working range in x : 4000 mm automatic movement of the clamps Cjbjwfw Rkou Thl Rsgt

Condition: new, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg Cgobu Tju Tv D Uehl Rst range L-W-H 2050 x 1800 x 2030 mm Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: excellent (used), Year of construction: 1997, Technical data: Working length: 1550 mm Cgobustmhc Ue Thl Rjt Distance between the uprights: 1150 mm Pressing force: 30 to CNC control: CYBELEC DNC EURO III controlled axes: Y1 / Y2; X Number of stop fingers: 2 pcs. Motor power: 3 kW Working height: 900 mm Dimensions (length x width x height): approx. 2050 x 1550 x 2100 mm Weight: approx. 2 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, total height: 2,510 mm, back gauge travel distance Z-axis: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, pressing force: 35 t, overall weight: 3,250 kg, operating speed: 10 mm/s, table width: 60 mm, bending length: 1,250 mm, travel distance Y-axis: 590 mm, working length: 1,250 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R Cjbujv Eam Nj Thl Rogt - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability

Condition: good (used), Year of construction: 2004, Parameter Details Type: CNC hydraulic press brake Press force: 90 t Bending length: 1,600 mm Distance between side frames: approx. 1,250 mm Cjbewfgi Nsu Thl Rogt Stroke (Y-axis): 200 mm (typical for this model year) Working height: 400 mm Thrust: 300 mm

Condition: excellent (used), Year of construction: 1997, Pressure capacity 40 t Folding length 2100 mm Clearance between the uprights 1600 mm Projection 220 mm Installation height approx. 300 mm Stroke length approx. 100 mm Working height 880 mm Table width 135 mm Stroke rate approx. 9 / min Table width approx. 240 mm Emptying speed approx. 70 mm / s Cjbu Theu Agk Hsl Rogt Working speed approx. 13 mm / s Retraction speed approx. 100 mm / s Drive power 5.5 kW Dimensions L x W x H 2400 x 1400 x 2100 mm Weight 3750 kg Accessories / Special features: - As good as new deer foot upper tool, continuous, can be sawn to any length yourself - As good as new universal die with various openings, 70 x 70 x 2100 mm - Motorized plunge depth adjustment with digital display - Manual backgauge approx. 600 mm with SIKO counter - Fast rapid feed and fast retraction - 2-hand operation, combined with foot switch + EMERGENCY STOP - 2 backgauge fingers - Pressure regulation via potentiometer on the control panel - Control panel, swivel-mounted - CE marking Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1998, Functionality: fully functional, pressing force: 35 t, bending length: 2,000 mm, pressure 35to max. bending length 2000mm arrester behind drive capacity 4,5 kW weight 3000kg Cjbu Towagykehl Rogt

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, Used hydraulic compact press brake model SCT 16.5 – demonstration machine, L=550 16/T Year of manufacture: 2022 Pneumatic R-axis on the backgauge 3 units of manual SpeedGrip clamping system Manual WILA/TRUMPF Top Clamping System Table Mount for TRUMPF Substructure for Internal Transfer Support Table with Guide Proportional Valve for Continuous Bending Speed X-Stop Retraction Technical Specifications: Max. Press Force: 160 kN Clearance Between Columns: approx. 400 mm Max. Tool Length: approx. 550 mm Cgsbujv Uzwus Thl Ret Thrust in the Side Columns: approx. 200 mm Infinitely Adjustable Stroke: approx. 170 mm Working Speed: 10 mm/sec Return Stroke Speed: approx. 80 mm/sec Max. Installation Height of Ram and Table: approx. 360 mm Table Length: approx. 550 mm Table Width: 60 mm Drive Power: 1.6 kW Net Weight: approx. 1180 kg Dimensions W x D x H: approx. 820 mm Dimensions D: approx. 850 mm Dimensions H: approx. 1520 mm

Condition: excellent (used), Year of construction: 2004, Technical specifications: Working length: 2600 mm Width between columns: 2150 mm Pressing force: 45 tons CNC control: DELEM DA 66 W Controlled axes: Y1/Y2; X; R; Z1/Z2 Motorized adjustable backgauge with 4 stop fingers Thrust: 310 mm Working height: 930 mm Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2150 x 2150 mm Weight: approx. 5 tons Accessories: 1 set of standard tools Condition: Cgebu Thlowd Uins Rst The machine is in very good condition. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Cgebu Tsuy Idiehl Rjt

Condition: used, Year of construction: 2004, Machine in very good condition. Hours 11686. 2 axes. Cobewah Hfju Thl Regt

Condition: new, Year of construction: 2024, PB 4 Bending centre With the Durma bending centre you get flawless results with maximum speed and safety, fully automatic tool change and minimum set-up time. The Durma bending center with its strong machine body, excellent precision, ergonomic design and its multiple bending functions, will occupy an important place in your operation. The combinations that we can technically apply in punching and laser machines allow maximum time saving in your production processes. Our developed smart consumption, operator independent standard production and Durma CNC bending center, which is manufactured according to stable thermal condition works, offers you the possibility to make profits against the increasing energy costs. Durma bending center performs simple and complex bending operations of sheet materials with thickness between 0.5 and 4 mm fully automatically. With its user-friendly, easy-to-use interface and software that simplifies part programming, this product will be your solution partner. Technical data: Maximum bending length: 2800mm Minimum bending length: 350mm Maximum sheet input length: 3050mm Maximum sheet input width: 1524mm Minimum bendable width: 150mm Maximum bending height: 254mm Maximum bending depth: 50mm Maximum sheet rotation circle: 3300mm Bending force: 500 KN Compressive force: 1000 KN Maximum plate thickness: Cgjbu Teg Adi Rohl Rst For Fe 410 N/mm2 Material: 3.2 m

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 12999, Electroic servo break Cgobu Theh Eip Iol Rjt - 40t x 1300mm - ESA control (network-compatible) - 4 Axis (Y1, Y2, X, R,) - Save up to 50% Engergie - Highspeed bend 20mm/sec. - Precise bending 0.001mm - No hydraulics = lower service costs

Condition: ready for operation (used), Year of construction: 1998, Available immediately from location: Mecos CNC press brake Type Mini 15/835 Year of manufacture 1998 Equipped with a 3-axis CNC graphic control system KVARA 200 X-Y-R with angle programming Pressure capacity 15 tons Bending length 835 mm Expansion between columns 785 mm Thrust 137 mm Stroke 120 mm Clearance between press beams 320 mm Cjbu Towbqlyohl Rsgt Drive 3 kW Weight 2 tons Many tools Price €4,500 plus VAT from location CH

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, total height: 2,380 mm, pressing force: 36 t, total width: 1,330 mm, total length: 1,805 mm, overall weight: 2,600 kg, Eladó egy kitűnő állapotban lévő TruBend 7036 CNC élhalítógép. Műszaki paraméterek: Stabil gépkeret: Hegesztett konstrukció, az álló és ülő kezeléshez feszültségmentesen hőkezelve, két oldaloszlopot, asztalt, összekötőtartót foglal magába. Cgebuowc Sdtj Thl Ret Nyomógerenda: Feszültségmentesen hőkezelve, deformáció-optimalizált. Felsőhajtás: Nagyon dinamikus, elektromechanikus közvetlen hajtás (Torque motor), max. 25 mm/s munkasebesség (a kiválasztott süllyeszték szélességtől és az üzemi ciklustól függően). Induktív hosszúságmérő-rendszer hőmérséklet-kompenzációval Kapcsolószekrény-klimatizálás: A kapcsolószekrény ajtajában lévő klimatizálás megfelelő üzemi hőmérsékletet biztosít a kapcsolószekrényben. Ergonomikus gépdesign 3-tengelyes hátsó ütköző rendszer (egy ütközőujj): Nagyon dinamikus biztonsági 3-tengelyes hátsó ütköző rendszer. Fogasléc-fogaskerékhajtással, CNC-vezérlésű X-, R- és Z-tengelyek szabadon programozható, és ezáltal fokozatmentesen állítható ütközési mélység és magasság biztosítja a nagy pontosságot. Üvegszálas-ütközőujj, edzett fémes ütközővel. Felső szerszámbefogó: Lehetővé teszi a gyors és precíz szerszámcserét: vertikálisan és horizontálisan; rögzítés: kézi, önközpontosító. Alsó szerszámbefogó: Egyes V-matricák egy speciális lapra kerülnek. Rögzítés: kézi, edzett feszítőléc és befogóléc. Biztonsági berendezés: Biztosítás vész-állj nyomógombbal, 2 nyomógombos pedál az álló és ülő kezeléshez, oldalt tolható védőajtók és egy hátsó és oldalsó védőburkolat. Az oldalsó védőburkolat átlátszó, ütésálló műanyagból készült A max. nyomógerenda-zárósebesség kisebb vagy egyenlő 10 mm/s-mal; CE-jellel rendelkezik. A nyomógerenda záródási sebességei nagyobb vagy egyenlő 10 mm/s-mal (220 mm/s) az EN 12622 szerint – a CE-jelnek megfelelően – érintésmentesen ható (optoelektronikai) biztonsági berendezéssel (BendGuard) lehetséges. TRUMPF TASC 6000: A TRUMPF TASC6000-vezérlés Windows XPe operációs rendszerre épül, 1,1 GHz-es Pentium M-mel és 15“-os érintőképernyővel, USB interface-szel, 1 GB RAM memóriával. Áttekinthető program- és szerszámhasználat. Dialógus-vezérelt numerikus munkahelyi programozás a vezérlésen. A gépi vezérlés integrálása egy vevői hálózatra lehetséges. 6-tengelyes hátsó ütköző rendszer (két ütközőujj): Mind a 6 tengely egymástól függetlenül mozgatható. Az ütközési él a tér minden irányát felveheti: stabil ütközési helyzet az aszimmetrikus munkadaraboknál, beállítási idő nélküli ütközőátállítás. Préserő 360KN Hajlítási hossz 1020mm Hasznos beépítési magasság 295mm Szabad oszloptávolság 932mm Kinyúlás 150mm Munkamagasság 1150mm Sebességek Y-tengely gyorsjárat 220 mm/s max. Y–tengely munkajárat 10-25mm/s Y-tengely visszaállás 220mm/s X-tengely 1000mm/s R-tengely 330mm/s Z-tengely 1000mm/s Pozícionálási pontosság Y-tengely 0,002mm X-tengely 0,02mm Z-tengely 0,06mm Ütközőzóna elmozdulási értékei Y-tengely lökete 120mm X-tengely elmozdulása 235mm max. ütköző zóna X-irányban 500mm R-tengely elmozdulása 75mm Vezérlés Windows XPe, vezérlés PC-bázison, Pentium M 1,1 GHz, 15“ Helyigény (hosszúság x szélesség) 1805X1330 Magasság 2380mm Súly 2600Kg

Condition: new, The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Cgsbusqc S Nae Thl Rot

Condition: excellent (used), Year of construction: 1999, Sheet metal press brake MECOS Mod SYNCHRO 30/125. Useful bending length 1350 mm. Bending pressure 30 Ton. N 4 axes Y1-Y2-X-R. Piston stroke 110 mm. Lateral recess 220 mm. Updated ESA CNC control. Passage between uprights 1250 mm. Distance between ram table 250 mm. Cgobu Thsv S Arzsl Rst Motorized back gauge. Upper locking type Promecam. Motor power 7.5 kw. Machine weight 2900 Kg.

Year of construction: 2024, Condition: new, The DA-69T control offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on product feasibility and handling. DA-69T features: - 3D- and 2D- graphical touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Sensor Bending and correction interface - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! - Fully electronic drive - Up to 30% higher productivity - Up to 50% energy savings through Start-Stop technology - Faster than hydraulic press brake - Reduced operating costs - Much lower service and spare parts costs (the electric press brake is technically much simpler and almost maintenance-free) - No harmful oil - quiet - efficient - independent of Hyd. Oil - Low noise operation - relaxed and stress-free bending - Complete work area Cobujd Sak Sj Thl Rjgt - Touchscreen operation Machine dimensions: ( L x W x H ): 2.150 mm x 1.650 mm x 2800 mm Technical details: bending length: 1.250mm Free stand passage: 1.300 mm Press

Condition: as good as new (ex-display), The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Cgobu Tsmf Tilehl Rjt

Condition: as good as new (ex-display), The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Cgjbu Thlsv Rbv Aj Rjt