Used Mechanical Forging Press for sale (17,279)

Condition: repair required (used), Year of construction: 1990, functionality: not functional, power: 45 kW (61.18 HP), Briquetting machine, with some spareparts and 45kw motor. Njdpstur Ewsfx Afzscl

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Ncodpfx Afeyc R Uiszol Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, table width: 300 mm, table length: 400 mm, pressing force: 15 t, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Ncodpfjyc R Nmox Afzsl Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm output 2000 KN Ncjdpfx Asq Awh Refzjl tracking travel 13 mm safety distance 176 mm

Condition: good (used), Year of construction: 1978, Make: HAULICK ROOS Type: RVD 40 Year: 1978 Levelling straightner RASTER 12 180/19.150-1 New 1986 incl. Decoiler  incl. Feeder  Capacity Kg: 40000 Table Length:590mm Table Width: 500mm Hole in table:100mm Nsdpfx Aox S H Ilefzjcl Ram size: 590 x 380mm Stroke: 8 - 50mm Strokes: 30 - 300Min.

Condition: excellent (used), Year of construction: 1995, Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Njdpfx Afjx Sx Spezocl Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:1500mm Height:2200mm Weight:3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s Nsdpfxewmf Tve Afzscl as is where is, WITHOUT putting into operation

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers Ncodpfob A S Uvox Afzsl -Manufacturer: WMW, hand crimping pliers type PH 2.5C -Crimping: of cable lugs and cable connectors -Pressing force: 25.0 N -Pressing stroke: 15 mm -Transport case: incl. accessories, see photo -Quantity: 1x crimping pliers available -Price: per piece -Dimensions of pliers: 600/180/H25 mm -Total weight: 3.2 kg

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors Njdpfx Afjwup Efjzocl -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm -Weight: 1.1 kg

Condition: used, Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Njdpsxacifjfx Afzecl Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Model: 2MI1600DE/SE Year: 1998 Condition: Used Stock number: 0367 Pressing force: 1,600 tons Number of pressing points: 4 Ram stroke: 1,200 mm Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Nodpfx Afjx R U Nujzscl Lower blankholder cushion stroke: 500 mm Withdrawable carriage: Present, front side

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: Ncsdpfou Nfinex Afzjl largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm Ncedpfx Afeu Icwgezol hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, Manzoni 40 Ton high speed press 150/300 strokes Used - bargain Ncodpfxskn Hk To Afzel

Condition: used, Manzoni 60 Ton high speed press 110/308 strokes Used - Bargain Ncodokn Hqgopfx Afzjl

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. Application Types Stamping Njdpfxsx E Ea Hs Afzjcl

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm Nedpfxodxvfpj Afzjcl table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: Nedpfx Aex Ezuyefzocl - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: good (used), Year of construction: 1984, Automatic Press Factory Warszawa-Włochy Ncodpow Uaxzsfx Afzol TYPE PXS 100 Eccentric Press, pressure 100 t Year of manufacture: 1984

Condition: used, Year of construction: 1982, functionality: fully functional, Eccentric; 15 kW; Capacity 150 t; strokes per minute 120; ram stroke 175 mm Ncsdpjxz A H Tsfx Afzjl

Condition: ready for operation (used), For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Specifications and features: • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Ncjdpfx Ajx A Ivvefzol Condition: Good, clean, and working condition. Can be demonstrated immediately.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement Ncjdpfoxf Utasx Afzsl - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Force 1600 tons Slide stroke 300 mm Ncedjx Ek Ntjpfx Afzjl Distance adjustment between table and slider 10 mm Slide strokes per minute 75 spm Length of a rod 920 mm Closed height (min distance table–slide) 660 mm Table dimensions 940 × 1200 mm Table height above floor level 450 mm Slide dimensions 860 × 910 mm Lateral window (h/w) 560x600 mm Main motor 110 kW Dimensions 5060x3940x5125 mm Press weight 120 tons

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Ncodpfx Aovbcxtefzjl Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Nodpfx Ajrt Uc Ejfzjcl Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request