Forging line INVER PRESS LECCO 100 T built in Italy. Brass forgings were made on the line from a solid rod fi 19. After swelling, we get a diameter of fi 24. Product lengths: from 25 to 50 mm.
The forging line consists of the following devices:
1. INVER PRESS LECCO 100 TON forging press, eccentric with pneumatic clutch, pressure: 100 tons
- dimensions of the eccentric press (width x length x height): 1750 x 1100 x 2100 mm
2. AMYSA WMU V-10x induction device made in Italy:
- induction heating ba...
pressure:800 t
distance between columns:1200 mm
stroke:500 mm
total power requirement:85 kW
weight of the machine ca.:40 t
dimensions:4100 x 3500 x 6650 mm
draw back pressure:80 t
Master cylinder:1 Stück
column diameter:250 mm
dayligth:1000 mm
Table dimensions:1300 x 1100 mm
ram surface:1300 x 1100 mm
:800 mm
table height over floor:950 mm
table load:5 t
pre-running speed:250 mm/sec
return speed:150 mm/sec
:1000 l
:10 mm/sec
:inbegriffen ?
:inbegriffen ?
:inbegriffen ?
:inbegriffen ?
:inbegriffe...
pressure 3150 MKP
stroke 500 mm
strokes - infinitely variable 80 Hub/min
Bkpneha0vs
table surface area 800x800 mm
total power requirement . kW
weight of the machine ca. t
dimensions of the machine ca. m
The matching scraping press can also be purchased with the hammer
Producer SMERAL
Type: mechanical press
Build year 1973
Capacity 500 tons
Ram Stroke; 250mm
Close height ; 435 mm
Ram adjustability: 140 mm
Table dim. 1250 x 1100 mm.
Bac0sdkv
Ram surface dim; 1120 x 710 mm
Press weight; 32 000 kg
1.500 to capacity tube drawing press, part dia/length 300-1.650 mm / 3 - 10m, max part weight, 27 to, LxWxH 100x30x30m, new HAUHINCO water hydraulic system
Bkyqubssdv
The Old Bank, 153 The Parade, High St, Watford WD17 1NA, UK
5899 km
1985
as good as new (ex-display)
Horizontal forging machine(Upsetter) Stanko Ryazan V 1136
Manufactured by Tyazhpressmash (Russia)
Qh2kcia
Year of manufacture 1985
Capacity, ton 400
Movable die stroke, mm 125
Max. upsetting ram stroke, mm 290
Upsetting ram work stroke, mm 190
Upsetting ram return stroke with closed dies, mm 60
Distance between upsetting ram and dies stroke forward, mm 100
Number of ram strokes per minute 50
Die dimensions, mm 450 x 160 x 480
Electric motor power, kW 21
Machine dimensions, mm 4330 x ...
pressure 1645 t
stroke 1000 mm
dayligth 3000 mm
Tgfi9jgz
Control
down speed 280 mm/sec
return speed 275/346 mm/sec
distance between columns 2520 mm
total power requirement kW
weight of the machine ca. t
the machine is in very good condition
machine was overhauled
new control
optional you can buy a shifting table as well
optional you can buy a surrogate column as well
Press ZDAS LU 1000/1250
D020mjsra
Producer ZDAS
Type: mechanical press
Build year 1965
Capacity 1000 tons
Ram Stroke; 315mm
Close height ; 1042 mm
Ram adjustability: 190 mm
Table dim. 1220 x 1500 mm.
Ram surface dim; 1110 x 1260 mm
Press weight; 71 930 kg
Press dimensions: 3420mm x 2900 mm x (Height)7115 mm.
Press intended for sale together with other assets due to the termination of the company's business.
Price not include disassembly and transport
capacity 4.000 to, max workpiece: dia x L 3.300 x 1.390 mm / weight 27 to, stroke 3.400mm, min/max dia 175-800 mm, water-hydraulic system, height over/under floor: 12,7/9,5 m, weight, ca. 700 to.
Gmpfd9odg
More Information upon request
Nominal weight of the falling parts: 750 kg
Max. number of blows per minute: 105
Kinetic energy: 1900 kg
Distance from an axis of the slider up to bed: 750 mm
Cylinder diameter: 600 mm
Diameter of the plunger: 630 mm
Max. headstock travel: 835 mm
Dimensions:
-Left-to-right: 3940 mm
-Front-to-back: 1430 mm
Height above floor level: 3260 mm
Y2ee3fua
Weight:
-With an anvil-block: 25600 kg
-Without an anvil-block: 16600 kg
Press Smeral LZK2500 A
Price is only for the forging press LZK2500A
Crpx2kj
Price include bolster and subbolsters for the die inserts ( if is interested)
Build year 1981; Prod. No. 6425
Technical condition – Press need repair connection between clutch and shaft. The wedges between shaft and clutch are damaged and slots as well. Rest of press is operational condition.
Possible also to buy whole line or rest equipment separately.
LDO 315 – trimming press
Build year 1982;
Induction heater IKR 1...
The Old Bank, 153 The Parade, High St, Watford WD17 1NA, UK
5899 km
1969
excellent (used)
-Max pressure at the end of stroke – 4000 ton
-Press stroke – 400 mm
-Number of stroke – 50 per minute
-Max distance of stroke from the table – 1400 mm
-Dimensions of slider: 1320 x 1320 mm
-Bed dimensions: 1120 x 1600 mm
-Bed movement by height – 20 mm
-Max pressure of upper ejector – 20 t
-Max stroke of upper ejector – 65 mm
-Max pressure of lower ejector – 40t
-Max stroke of lower ejector – 80 mm
Hiwfowezg
-Main motor power – 225 kW
-Main motor speed – 730 rpm
-Total width — 6280 mm
-Total de...
Price is only for the forging press LZK4000A
Price include bolster and subbolsters for the die inserts ( if is interested)
Build year 1983; Prod. No. 6425
Technical condition – operational.
Bif0rv07u7
Possible also to buy whole line or rest equipment separately .
LDO 500 – trimming press
Build year 1989; Prod. No.4861
Induction heater IKR 2000 kW
Build year 2007.
Fully automatic induction heater with automatic billet loading/positioning system, temperature 3 way control and segregation system...
The Old Bank, 153 The Parade, High St, Watford WD17 1NA, UK
5899 km
1985
excellent (used)
Manufactured by Kalinin plant (Russia)
Year of manufacture app. 1985
Nominal weight of falling parts, kg 1000
Energy of impact, Kj 30
The greatest number of impacts in a minute, 103
Ram axis-to-frame distance, mm 800
Working zone daylight, mm 750
Die impression size, mm 360 x 140
Lower die impression-to-floor distance, mm 750
Optimum workpiece cross-sectional dimensions, mm:
- square 160
- rounded 180
Main electric motor power, kW 75
Machine dimensions, mm 4400 x 1780 x 3570
Gyrsdp22y
Weight of ...
CAPACITY - 2000 TON
STROKE - 300 MM
DAYLIGHT - 1350 MM
E3kbklm
TABLE SIZE - 1,100 x 1,300 MM
TOTAL WEIGHT - 130.000 KG
The press is complete with motor and electric system.
All systems needed.
Upper and lower extraction.
Price upon request.
Manufacturer – Stanko, Russia
Year of manuafacturing : 1975
Nominal power, tf – 3200
Nominal power of pushing cylinder, tf – 32
Maximum skid stroke, mm – 2000
Distance between table and skid (in upper position), mm – 4000
Distance between columns :
-front, mm – 3000
-side,mm – 1200
Nominal force of the cylinders moving the table, tf – 95
Nominal travel of the table, mm – 5000
O828sfe8v
Table dimensions, mm – 6000x2400
Nominal power of the extractor, tf – 165
Extractor travel:
-total,mm – 1300
-b...
Weight of the falling parts: 196 kg
Number of strokes per min: 210
Effective kinetic energy of falling part by stroke: 330 kg/m
Distance from ram axis-to-frame: 340 mm
Anvil height above the floor: 750 mm
Stroke run: 460 mm
Striking area: 75x190 mm
Motor: 15kW
Overall dimensions mm:
-Length: 930 mm
-Width: 1860 mm
-Height: 2160 mm
Weight of the hammer: 3450 kg
Weight of anvil 1650 kg
Price 3800 EUR
Bivvaf9sij
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.