Hydraulic breaker (rock hammer)

Lasco HO-U 315So

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h Itedpfsw Aw Taex Ahyjb ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Iedpovbcxtjfx Ahystb Main motor 41kw Movie available

Condition: like new (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, injection pressure: 2,500 bar, plate length: 695 mm, plate width: 695 mm, power: 49.5 kW (67.30 HP), type of input current: three-phase, Equipment: documentation/manual, Arburg Allrounder 520 E 1500-400 Golden Electric Machine as new. Very little used, only for sample production. Machine is fully equipped: 40 mm screw High wear resistant cylinder 2nd core pull control for sequential movements – holding pressure via check valve 4 free water manifold circuits with optical flow indicator Conveyor belt – electric 6 electric heating control circuits for mold temperature control Iedpfsxbpbkox Ahyotb Full documentation available. Complete specification list available by email upon request.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm Iodpevuuknofx Ahystb column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1981, Barnaul 1000t press in perfect working condition. Isdpfx Aex Da Aqshystb Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg.

Condition: used, 25/11/2025 Isdpfexqq E Aox Ahyotb Barnaul 1000t press in perfect working condition, equipped with a Press Transfer System Tecnomatic Italy. Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg.

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Isdpfsx Nhqijx Ahyotb Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request