Used Forging Press for sale (12,221)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, stroke length: 800 mm, ram plate width: 1,200 mm, ram plate length: 2,200 mm, overall weight: 100,000 kg, 2022 Macrodyne 1500T Hydraulic Hot Forging Press. Condition Very Good. Weight 100000 kg. Refer to attachments in the documents sections for more information. Unit available immediately. Buyer responsible for removal, contractor must be licensed and insured. MAXIMUM PRESSING FORCE 15,000 KN USABLE BED BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm USABLE RAM BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm DISTANCE BETWEEN TENSION MEMBERS (L-R) 2400 mm Fgedpfxez Hb T Ho Al Ueh DISTANCE BETWEEN TENSION MEMBERS (F-B X HEIGHT) 750 mm X 1473 mm DAYLIGHT 1400 mm SHUT HEIGHT 600 mm STROKE 800 mm TOP EJECTOR CAPACITY (STATIONS 3 & 4) 750 KN TOP EJECTOR STROKE (STATIONS 3 & 4) 90 mm BOTTOM EJECTOR CAPACITY (STATION 3) 750 KN BOTTOM EJECTOR STROKE 200 mm MAXIMUM PUNCH WEDGE CAPACITY (STATION 4) 6000 KN

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Fgodpszypd Nefx Al Ush Throat depth: 750 mm Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Ram weight: 750 kg

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece Fgsdpfx Alozcdluo Ujh -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Fgsdpsziw Nlsfx Al Ujh Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: good (used), Columbian Press 1858 Letterpress Manufactured in Great Britain by Henry Watts Fgjdpfjz N Shbjx Al Ujh Year of manufacture 1858. Can be used as a work machine or as a museum exhibit.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Type: HO - U 400 SO Year of manufacture: 1999 Fsdpfsziw Nxox Al Ujgh Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, hydraulic forging hammer (H5) Manufacturer: BECHE Type: KGH 31.5 Year of manufacture: 1976 Energy: 31.5 kJ Machine foundation with spring damping elements Forging furnace Gas-heated Power: 400 kW New Siemens S7 control system, refurbished Fodpfx Aoziw N Eol Uogh

Condition: used, machine/vehicle number: 27742, type of input current: three-phase, pressing force: 200 t, table width: 1,200 mm, table length: 1,000 mm, ram plate width: 160 mm, distance table to ram: 500 mm, overall weight: 23,600 kg, distance between stands: 350 mm, ram adjustment: 100 mm, stroke rate (max.): 35 1/min, MINALI mechanical eccentric press model 2MI 200, 200 tons, high-rigidity double-column frame, Italian industrial construction. Robust and heavy-duty machine (approx. 23,600 kg), ideal for: Blanking Sheet metal stamping Fjdpfx Alsyutk De Ujgh Bending Light deep drawing General mechanical operations Equipped with: Slide stroke 250 mm Ram adjustment 100 mm Table size 1200 x 1000 mm 35 strokes/min Main motor 20 HP Pneumatic system Centralized lubrication Pedal and push-button control Anti-repeat system Emergency stop Machine complete with original electrical cabinet and technical documentation.

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t Fodpfx Aezrpulol Ujgh blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min Fgsdpfx Ajrt Uc Ejl Uoh max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: good (used), Year of construction: 1985, Manufacturer: RADAELLI Model: 1000/S2 Fjdpjyrigpefx Al Ujgh Year: 1985 Condition: Used Stock number: 0388 Press force: 1000 tons Press points: 2 Ram dimensions: 2,820 x 2,200 mm Table size: 3,150 x 2,200 mm Ram stroke: 500 mm Die height at BDC: 1,000 mm Ram adjustment: 190 mm Strokes per minute: 15 spm Pneumatic cushion present

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Fgedpfx Aezldwusl Ujh Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: excellent (used), functionality: fully functional, Manufacturer: Šmeral Type of machine: Hot forging press Fgedpfx Aszxhzwel Ush Rated pressing force: 1,000 t Ram stroke: 220 mm Stroke rate: 100 strokes/min Table size: 995 × 950 mm Ram adjustment: 10 mm Stroke of upper ejector: 35 mm Drive power: 40 kW Weight: approx. 45 t

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressing force: 800 t, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t Fgodpedxvfpsfx Al Ush pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 86 t, stroke length: 215 mm, overall weight: 7,300 kg, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm MACHINE DETAILS Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Fsdpfx Aloz Hvgze Usgh Connected power: 17.0 kVA Control voltage: 24 V DC Compressed air connection: 6 bar Weight of the press: 7,300 kg

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Fodpfx Aloz N Shhe Usgh Flow table, system of claws holding the sheet. Electrically driven spreading roller.

Condition: good (used), Letterpress printing press, foot operated Made in Germany Fully original machine. Fgedpfx Ajz N Sg Rol Ueh A brilliant looking exhibit to put in a company lobby. A manually added piston. Rollers Format of the pressure 35x24cm

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Fgsdpfx Aljztaufo Uoh

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Fedpezy U Uyefx Al Uegh Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 23,390 h, pressing force: 85 t, overall weight: 8,600 kg, controller model: TASC 6000, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Fgedpfx Ajz Hxtdel Ush Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Fgedpfxozxclds Al Ujh Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t Fodpfx Alozrpt Uo Usgh dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s Fedpfx Alezvnpis Usgh - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: Fsdpfezb Aivsx Al Ujgh You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2012 1140, total width: 1,700 mm, total height: 1,500 mm, total length: 1,200 mm, empty load weight: 500 kg, Equipment: dust extraction, No minimum price – guaranteed sale to the highest bidder! For sale is a machine set consisting of a briquetting press and a dust extraction system! Fjdpfx Alez Eaw Uo Uogh MACHINE DETAILS Transport packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,700 x 1,500 mm Unladen weight: 500 kg EQUIPMENT Briquetting press Dust extraction system