Used Transfer Press for sale (28,974)

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING Gbedpfxeh Rkhnj Ag Teg AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: used, Year of construction: 2005, Make: ARISA, Model: LD8-4-2000-470-230-LDE, Year of manufacture: 2005, Serial No.: 820016341, Press control system: Siemens, Type: Sinumerik 840D, Pressing force: 1,800 t, Table clamping surface: 4,500 x 2,300 mm, Ram clamping surface: 4,500 x 2,300 mm, Ram stroke: 750 mm, Ram adjustment: 400 mm, Die height min.: 900 mm, Die height max.: 1,300 mm, Strokes per minute: 8 - 24 spm, Cushion force (table): 2x 300 - 200 t, Cushion stroke (table): 250 mm, Cushion force (ram): 2x 5 - 55 t, Cushion stroke (ram): 150 mm, Coil feeding line, Max. coil weight: 25 t, Coil width: 300 - 1,800 mm, Sheet thickness: 0.5 - 3.0 mm, Consisting of decoiler and loading cart, Straightening machine, Oiling station, Transfer system, Switch and control cabinets, Platform system with staircase, Conveyor belt L 10,000 mm, Workbench system with undercabinets and vise, Quality control workstation. Gbodpfjx Ry Dqex Ag Tjg +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW Gbodpfxju Nftte Ag Tsg operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, MANUFACTURER Fagor MODEL AND TYPE SE4-1000-4300-2400 Mechanical Transfer Press with Coil Feed (TP5) YEAR 1994 Capacity 1000 tons Bed area 4300 mm x 2400 mm Slide area 4300 mm x 2400 mm Stroke 720 mm Shut height (min) 800 mm Shut height (max) 1200 mm Speed 10 - 20 spm Adjustment 400 mm Approx. Height above floor 8296 mm Features Coil feed, 2 bolsters F-B onto t-track, hydraulic clamping on slide, Manual clamping on bolster Transfer Max transfer beam out 2352 mm Max transfer beam in 952 mm Distance from bolster to transfer rail 765 mm Feed height 760 mm Pitch 625, 800, 1000 Clamp in/out 225 mm Lift 0 - 200 mm Height of exit conveyor above bolster 660 – 770 mm Coil Feed Max coil weight 5000 kg Max coil width 1465 mm Coil o/d 1550 mm Coil i/d 508 mm Material thickness 0.5 – 1.5 mm Max load pitch 0 – 1000 mm Material feed height over bolster 760/850 mm Gbjdpfxju Er Hxe Ag Tjg

Condition: excellent (used), Year of construction: 2012, functionality: unexamined, Table size: 3250 x 1500 mm Column distance: 3350 / 1200 mm Ram length/width: 3250 x 1500 mm Feed: 1000 mm Closing stroke: 300 mm Ram stroke: 200 mm Pass-through direction: left - right Distance from lower tool to upper edge of press table: 450 mm Table profile center section: 100 x 100 mm Table profile end sections: 100 x 100 mm Table inside distance max.: 1000 mm min.: 400 mm Maximum transport weight: 100 kg Gjdpex Sv Nxjfx Ag Tobg Max. strokes: 32 strokes/min. Press force: 4100 kN

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Gbedpfohtaaqex Ag Tjg Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: excellent (used), Year of construction: 2008, ram adjustment: 600 mm, pressing force: 2,000 t, stroke length: 700 mm, table length: 5,500 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: S4-20000/5500x2500/LD-ET3 Nominal press force: 2000 ton SPM: 8-24 Nominal energy: 400 kJ Slide stroke: 700 mm Slide adjustment: 600 mm Open height: 1400 mm Clearance between uprights: 5970 mm Table dimensions: 5500 × 2500 mm Lower slide table dimensions: 5500 × 2500 mm Height of slide/ram carriage: 600 mm Opening in uprights: 3100 mm Main motor power: 250 kW Cushion force: 1500 kN Cushion stroke: 250 mm Press weight approx.: 390000 kg Normal slide rest position: Top Dead Centre Maximum flywheel speed: 421.6 rpm Maximum slide dimensions: 5500 × 2500 mm Max weight of upper die: 200 kN Power supply: 400 V, 50 Hz Minimum pneumatic supply pressure: 6 bar Hydraulic pressure in brake–clutch unit – min.: 68 bar Hydraulic pressure in brake–clutch unit – max.: 73 bar Transfer system: Transfer stroke: 0-1250 mm Maximum opening: 2500 mm Bar-closing stroke: 0-750 mm Lift stroke: 0-280 mm Internal clearance between closed bars: 1000 mm Pass-line height relative to bolster: 580 mm Gjdpfx Aox Ifrzjg Tjbg

Condition: like new (used), Year of construction: 2022, Manufacturer: ROVETTA / AIDA Model: DFS-TE4-20000(2) 730-250 Press force: 2,000 tons Drive: SERVO Stroke: 800 mm Stroke rate: 50 rpm Ram adjustment: 400 mm Side opening: 3,650 mm Bolster area: 7,300 x 2,500 mm Ram area: 7,300 x 2,500 mm NORDA Transfer Transfer pitch: 0-1,250 mm Transfer opening min./max.: 700 - 2,740 mm Transfer stroke: 0-350 mm Gbodpsx Idxmefx Ag Tsg Millutensil coil line Material thickness: 0.5 – 3.0 mm Material width: max. 1,800 mm Decoiler load capacity: 20 tons

Condition: good (used), Thrust 100 ton. Thrust points No. 2 110 mm stroke Slide adjustment 80 mm. Press tables 1,200 x 600 mm Gsdpfx Aeq N Et Neg Tsbg Lateral passage 460 m Hits per min. 40,180 Min. 460 mm Transfer DGM

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition Godpfx Agjr I E Ito Tebg

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 2035, input voltage: 380 V, power: 4 kW (5.44 HP), Transfer punching machine SCHOREDER & BAUER HB 20 Gbsdpfxjw Tcglj Ag Tog Power 20T per workstation (2x20 T) Number of strokes from 20-100 rpm Year: 1989 Serial number: 2035 Kw 4 Weight approx. 3500 kg Complete documentation comes with the machine. The machine is in working condition. The costs of organizing a crane or forklift for loading the machine are charged separately.

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Gbodpfxef Rt Ubs Ag Tog

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ram adjustment: 400 mm, pressing force: 2,000 t, stroke length: 800 mm, table length: 7,300 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: DSF-TE4-20000-730-250 Year of manufacture: 2022 Nominal press force: 2000 ton Energy at 15 spm: 630 kJ Energy at 28 spm: 390 kJ Strokes per minute: — full-revolution mode: 3–28 — endulum mode (at max. feed 105 mm): 3–50 Slide stroke: 800 mm Slide adjustment: 400 mm Maximum distance between slide and press table: 1200 mm Clearance between uprights: 7580 mm Slide dimensions: 7300 × 2500 mm Table dimensions: 7300 × 2500 mm Distance between side columns (front–back opening): 3650 mm Main motor power: 2 × 750 kW Slide-adjustment motor power: 30 kW Maximum upper die weight: 35000 kg Normal slide rest position: Top Dead Centre Total stopping time at 15 strokes/min: 799 ms Safety distance: 1278 mm Safety brake pressure: 105 bar Power supply (three-phase): 400 V, 50 Hz Minimum pneumatic supply pressure: 5.5 bar Transfer system: Transfer stroke, forward (adjustable): 0–1200 mm Gedox Ifn Ajpfx Ag Tjbg Opening/closing stroke for each side (bar travel, adjustable): 0–1020 mm Lift stroke (adjustable): 0–350 mm Internal clearance between bars in closed position: 700 mm Maximum opening between bars (bars fully open): 2740 mm Bar section dimensions: 220 × 220 mm

Condition: excellent (used), Year of construction: 2008, Manufacturer: ROVETTA / AIDA Model: S4-20000 5500-2500-LD Press Force: 2,000 tons Stroke: 700 mm Strokes per minute: 8–24 1/min Ram Adjustment: 600 mm Side Opening: 3,100 x 2,700 mm Table Surface: 5,500 x 2,480 mm Ram Surface: 5,500 x 2,480 mm Height of Sliding Table: 600 mm Drawing Cushion: 1 unit Drawing Cushion Force: 1,500 kN Dimensions of Drawing Cushion: 850 x 1,260 mm Gjdex Idt Depfx Ag Tsbg Drawing Cushion Working Stroke: 250 mm NORDA Transfer Transfer Step: 0–1,250 mm Transfer Opening min. / max.: 1,000 – 2,500 mm Transfer Stroke: 0–280 mm Millutensil Coil Line Material Thickness: 0.6 – 2.0 mm Maximum Material Width: 1,600 mm Decoiler Capacity: 15 tons

Condition: used, LEM (Noritsu Kikai) - Made in Japan Capacity: 200ton Stroke Length: 180mm SPM: 60 Die Height: 450mm Gsdpfxexuqvpe Ag Tobg Suitable for battery case production (deep drawing) The machine is in a fully working condition. We have operating videos available upon request.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2022438, type of input current: AC, power: 28 kW (38.07 HP), input voltage: 400 V, Equipment: documentation/manual, Monti Antonio 200 VSP-2250x1600 Thermal Press – As New Condition (Year of Manufacture: 2023) For sale is a nearly new Monti Antonio 200 VSP-2250x1600 thermal printing press (year of manufacture 2023, serial number 2022438). The system has been used exclusively for sublimation printing on blankets and is in perfect, fully operational condition. Technical specifications: Year of manufacture: 2023 Serial number: 2022438 Connected load: 28.7 kW Power supply: 400 V / 3~ / 50 Hz Working area: 2250 x 1600 mm Net weight: approx. 5,870 kg Condition: as new, fully functional Application options: Gjdpfow Skhuox Ag Tjbg Sublimation printing (textiles, blankets, large formats) Laminating, bonding Thermal transfer and finishing processes Also suitable for applications in advertising technology and industrial textile printing The machine is immediately available and can be inspected on site by appointment.

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown Gederf Uqzjpfx Ag Tobg - div . pressure reducer + separator - Weight approx. 80 kg - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm Gbsdjvzxpuopfx Ag Tjg no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 80’ colour production system. Item for sale: 1 x Xerox Versant 80 with the following equipment: Includes Fiery Controller E200-08 Includes Paper Deck A-CF03 Includes Booklet Finisher Includes Squarefold / Front Trimmer Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Gbedpfox S D Ipox Ag Tjg Total: Approx. 1,016,110 pages Colour: Approx. 865,654 pages Black: Approx. 150,456 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2025, total height: 2,100 mm, total width: 800 mm, total length: 2,200 mm, Empty weight: 1.145 kg Price: On request - Year: 2025 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: PPW10061N2025009 - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1500mm - Table length: 1500mm - Ram width: 120mm - Ram length: 120mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 2200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Gedpexb Scwofx Ag Tjbg

Condition: like new (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, total height: 2,120 mm, installation height: 2,120 mm, total width: 1,000 mm, throat depth: 695 mm, operating speed: 12 mm/s, overall weight: 1,200 kg, reverse speed: 9 mm/s, pressure: 12 bar, Hydraulic press Profi Press automatic 60 Tonnes single phase hardly used Godpfx Agex Dzfaj Tsbg Technical specifications Pressure force [kN]: 600 Maximum pressure [bar]: 259 Piston stroke [mm]: 380 Oil capacity [dm³]: 38 Working speed [mm/sec]: 2,87 Approaching speed [mm/sec]: 9,5 Return speed [mm/sec]: 12 Motor power [kW]: 2.2 Voltage [V]: 400/3 Frequency [Hz]: 50/60 Working width [mm]: 750 Weight [kg]: 540 Diameters Inside diameter of cylinder [mm]: 170 Diameter of piston rod [mm]: 75 Diameter of piston head [mm]: 100 COLLECTION ONLY FROM MANCHESTER Payment on collection No Vat . Features of this workshop press (60 ton M/H-2) Integrated pressure manometer Pressure regulation Hydraulic unit with a 2-speeds handle In height adjustable working table Joystick for the control of the piston Hand pump for precision pressing Optional accessories Movable cylinder Foot pedal, two-hands operation or hand remote controller V-block set for extra support Mandrel set / Pressure pins Digital stroke read-out Table plate / pressing table Protection screens (customisable) Dimensions in mm A: 2120 B: 1000 C: 695 D: 750 E: 260 F: 1315 G: 150 H: 197 I: 750 J: 805 K: 200 NO VAT ! , no vat added.

Condition: good (used), MURO ​​5000 A3 WT Bookbinding Press for Gluing Blocks The machine is in perfect condition. Large-format gluing, fast operation. Gjdpfx Agox N I S Te Tebg This is an original, top-quality product. Manufactured by Muro, Germany. The machine is equipped with two independent dryers to accelerate the gluing process and two heating power settings. Wheeled design. 230V or 380V power supply

Condition: used, functionality: fully functional, machine/vehicle number: 1591, Industrial flatbed heat press COMAS Tipo 85, suitable for sublimation printing, lamination, or thermal transfer on textiles, films, and composite materials. The machine was purchased but never put into operation. It has been stored in a dry environment and is in good physical condition. Equipped with VAHLE KEK 5/60 power feed system (industrial conductor rail). Heavy-duty construction, ideal for workshops or small production facilities needing reliable thermal pressing capacity. Gsdpfxexryylj Ag Tobg

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm Gbodpfxsvuukns Ag Tog no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: good (used), Bookbinding Press 50×40 with Base The machine is fully operational and ready for use. Gsdpfxex N D Tyo Ag Tobg Format: 500×400 mm Pressure: 5 tons