Direct press buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Pneumatic single change press GECHTER type 13 kN LP SEM 5 Direct-acting pneumatic press Fabr. No. 14420 built in 2008 Pressure force 1,3 ton. RADIUS 160 mm Top original table 300 x 225 mm Table surface sliding table 375 x 275 mm Tappet surface ø 40 mm Piston stroke 40 mm 7ya2ptxld Height without accessory equipment 300 mm Installation height from the original table with power sensor 220 mm Height with sliding table with force knife 140 mm Clamping pin hole ø 15 mm with clamping scre... more
1
48 MIO IMPRS Gus8rjz DIRECT IMAGING RYOBI 60X75 CM FIVE COLOUR PLUS COATER more
2
Kodak DirectPress 5634 DI Ryobi 3304 DI Presstek 34 DI Manufacturer: KBA OEM Presstek 2ppls3 Year: 12/2007 four Colors size 460x340cm (18 x 12 inch) Resolution: 2540 dpi or newer stochastic (near photograph) offset printing. more
2
max distance between portals: 1920 mm Ey8ccznjy Montage dubbele portaalpers -- Mobiel -- + 2 palans Presse mobile de montage à portique double -- + 2 palan Mobile portal press more
5
hydraulic punching-press with hydraulic unit Ooulji3l more
5
Flushing compressor, flushing connections-15x-11x controllers flushing connections-packed in a mesh box is only sold complete weight 312 kg S0q3k9 more
4
Volume: 0,718 m³ / min Final compression pressure: 10 bar Engine speed: 3000 1/min Engine power: 5.50 kW Oxgs7aid equipped with refrigeration dryer Hours of operation approx.: 30.000 h Standbystunden approx.: 50,000 hours Dimensions: Lxwxh 1.70 x 0.60 x 1,40 m Approximate weight: 250 kg more
1
Aquatron dampening Bacher Register 220 Owxwcg8r Plus Version Single-sheet feeder Powder sprayer approx. 50 Mio. impr. more
6
pressure 60 t no. of strokes 80 - 400 Hub/min sheet width 150 mm table-size 700 x 530 mm dimension of ram 700 x 430 mm distance table - lower edge of ram 350 mm Clorsjn ram stroke - adjustable min/max 20 - 80 mm feed length 5 - 150 mm total power requirement 15 kW weight of the machine ca. 9 t dimensions of the machine ca. m - with band-feeding unit - 2 connecting rods - adjustable stroke - strip decoiler - noise absorbing cabine more


direct press
every day

New machines via email!

Be informed!
6
operating pressure max. 10 bar delivery quantity effective 620 litres / min *operating hours 1,679* suction capacity 765 litres / min directly powered two-stage piston compressor F3iuqznx compressor speed 1,450 rpm boiler vertical version 270 litres contents - 16 bar boiler is mounted on elastic supports refrigeration dryer with compressed air filter condensate separator with automatic tank drainage - without photo noise absorption hood electrical data 400 V / 3.8 KW space requireme... more
2
hydraulic c-frame press capacity: 10 tons (down), 3.5 tons (up) Xbx8zz3p discharge: 300 mm min. distance to table: 900 mm max. stroke: 700 mm speed up/down 13/10 mm/s table dimensions: 550 x 550 x 350 mm motor: 4 kW heigth: 2.50 m weight: 2.2 tons manual and documentation more
5
Portable compressor, construction site compressor, screw compressor volume flow of 1.5 m / min petrol engine operating pressure 7 bar dimensions 1000/700/H800 mm Weight 210 kg 2pdbxy more
6
Agie digital bidirectional expansion DBE-01 A 613.810.1, second-hand, low wear, 100% functional 9fhdhclt3 more
4
Here are the technical data of the offered machine: If the data does not fit exactly, please request an individual offer according to your wishes with just one click: >>> Contact us for an individual offer <<< HIDRALMAC manufactures presses exactly to your wishes at surprisingly low prices! In order to avoid problems with the procurement of spare parts, almost exclusively components from REXROTH / BOSCH, SIEMENS and SICK are installed in the HIDRALMAC presses. Baimkc8ypp =====... more
5
pressure:100 t punching cross-cut in cmm:2430 mm² stroke:10 - 50 mm throat:510 mm Ojij90o Working height:1100 mm total power requirement:7,5 kW weight of the machine ca.:2,4 t dimensions of the machine ca.:1,78 x 1,02 x 2,06 m Hydraulic Peddinghaus punching machine 1001, with conventional drive, height-adjustable wiper with removeable panel. The stroke length and stroke position is adjustable between 10 - 50 mm at the Hydraulic 1001. The punching machine is equiped with a hydraulic low pressur... more
6
working width 3,500 mm maximum press force 1,500 KN maximum manual crowning system passage between the columns 3,040 mm V8irkznn inlet depth 200 mm table width 220 mm table height 900 mm ram stroke 150 mm opening width between table and pressure beam 490 mm downward speed 75.0 mm / sec. press speed 8 mm / sec. upward speed 37 mm / sec. motoric backgauge 1,000 mm with height-adjustable stop rail two material supports two-hand control panel comprehensive tool - universal die 90 x 9... more
3
pressure 100 t chamfer lenght 3500 mm Lg9m2kir distance between columns 2750 mm passage width 2600 mm throat 250 mm stroke 0 - 146 mm dayligth 400 mm table vertical adjustable 70 mm total power requirement kW weight of the machine ca. 10,2 t dimensions 3,5 x 1,9 x 2,62 m Acc.: Upper and lower dies, back gauge more
5
Hydraulic pressure switch type TGL10952-Adjustable from 0 to 320 bar price per piece-9x-Available Weight 0.5 kg 3u77ynvx more
6
Machine type: R 202 TOB Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 52 x 74 cm Totalizer: 39,7 Million impressions Available from: Immediately available Machine is: on Stock Vrza9q MABE... more
6
Maximum cutter diameter: 300 mm maximum notching width: 325 mm Max. Notching depth 110 mm M7n0d Max. Profile height 150 mm Pneumatic material release Mikrosprueheinrichtung Manual feed more
3
pressure performance 360 to 37terz9z working width 4,100 mm upright width 3,100 mm outreach 355 mm distance table pressing bar 430 mm hydraulic stroke 235 mm number of cylinders 4 retraction force 40 to forward speed 100 mm / sec. bending speed 8 mm / sec. retraction speed 70 mm / sec. working width 900 mm two front support arms depth under flur 900 mm motorized backgauge universal die electrical data 400 V / 24 KW space requirements width - 4,300 x depth - 1,800 x height - 2,9... more
Screw air compressor Atlas Copco GA 708 PE Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkuehlt. Usable volume flow rate, in accordance with DIN in 1945 at the outlet from the compact system measured and related to Ansugbedingungen pe at maximum operating pressure: 8 bar 122 1/s; 7.32 m ³/min The compression system is designed for operating pressures of 4 to 8 bar Main features: -int... more
5
Intermediate pressure regulator Plate-type LR-ZP-A/B-D2 35428-From 0 bar to 12 bar price per piece Available-8x-Weight 2 kg 3exl0qpl more
3
Agie DBE-01 A3 digital bidirectional expansion [...] 625854.5, second-hand, low wear, 100% functional, included with com. photos 9fhd0ew28 more
6
Machine type: SM 52-2- Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 37 x 52 Totalizer: 48 Million impressions Available from: Immediately available Machine is: on Stock Mrjsl CP Tronic A... more
3
2 Joka punching irons type SW 8-150, throat 150 mm, install height 142 mm, tool capacity diameter 1 - 8 mm, material thickness 4 mm in max. 60 kg/mm². price 115,-- EUR Diverse punching dies. ===== Mt0hiw 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, mater... more
1
1 used, well preserved pneumatic chain hoist capacity 1 to approx. 18 m hoisting speed without load at 6 bar lifting height: 10.3 m / min with load 5.3 m / min speed: 6.7 m/min (reduced speed at a lower air pressure) 2-line chain size: 6.3 x 19.1 air consumption at full load: 25 l / min compressed air: 400-600 kPA, 57-85 psi Iozcu307g more
4
Pressure gauge, pressure gauge with bourdon tube, pressure-temperature metrology G 1/2 "display up to 4 bar-2x available price per Package Weight 0.8 kg Js3q83 more
2
Agie DBE-01 A3 digital bidirectional expansion No. 625854-5, needed, low wear, 100% functional, included with com. photos Mzxx9 more
6

Press HEIDELBERG GTO 46+NP 1 color

St.Leon-Rot bei Heidelberg Germany
6595 km
1980
USED
Machine type: GTO 46+NP Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 32 x 46 cm Totalizer: 68 Million impressions Available from: Immediately available Machine is: on Stock Mtnyh8 Standa... more
4
Maximum pressure: 30 kN X0zgqkhhw Max stroke: 150 mm 2-hand operation Speed and force Steplessly adjustable more
2
pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t 7cb0ak3ac Acc.: programmable back gauge, upper and lower dies, table extensions more
5
pressure 63 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 250 mm Iyderes2 distance between table / ram 300 mm rapid drop speed 90,0 mm/sec working feed 7,0 mm/sec oil volume 120 ltr. table height 900 mm return speed 60,0 mm/sec dayligth 400 mm total power requirement 5,5 kW more
5
Emulsion splitting plant oil-water separation system, the cost and long-term reliable solution to the problem is usually the Oel-/Wasser- separation for dispersed condensates. The purified water meets the legal requirements regarding discharge dimensions 660/260/H700 mm Weight 18 kg Hiumx2gfi more
5
Langbank of Jorns 6 m ordinary State bending material 1 mm iron - aluminium turn plates up to 6 m in length, etc. more fully hydraulic - and as well as turn manually loading still set number of degrees rolling scissors free - ca 2200 kg weight test possible Cry9nz8te more
6
Machine type: PM 52-2 Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 37 x 52 cm Totalizer: 49 mio. Million impressions Available from: Immediately available Machine is: Mpu2f in production ... more
1
Pressing force: 160 kN maximum tool length: 550 mm Length x width x height: 820 x 850 x 1520 mm Cdo9rttm Infinitely adjustable stroke: 160 mm Weight: 1200 kg The photo shows another similar machine. more
5
working width 4,100 mm maximum press force 1,500 KN maximum upright width 3,700 mm outreach C-pillar 300 mm stroke of folding beam 215 mm working speed 6 mm / sec Cm33r9lhm CNC control CYBERLEC DNC 70 Y1-2, X controlled backgauge 600 mm manual crowning divided top tool - universal die electrical data 400 V / 7.5 KW space requirements width - 4,400 x depth - 1,400 x height - 2,700 mm weight approx. 13,400 kg   more
6
Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm S8yu3lulp ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,... more
5
5/2 Pressure boosters DPA-type-40-10 537273-43 VN -1: 2.5-8 bar 2: 4.5-10 bar Weight 1.5 kg Dvfu92b more
3
Schechtl KS 200 bending performance 1 mm steel - as much more Graduation Fusschlieser optional on-site different Rails, round rolls, bead creation, Backgauge rolling scissors and much more like tubes, pipe expanders Eckold Sandhu and track devices are shears the KS also always available electronic or mechanical should at present ca 20 times available from 2390 to €3300 his please call them on then I can them good advice and the right machines offering we have constantly over 200 units in stock ... more
6
Machine type: QM DI 46-4 Plus Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 34 x 46 Totalizer: 9,9 Million impressions Available from: Immediately available Machine is: on Stock Msk8f more
4
pressure 125 t chamfer lenght 3100 mm distance between columns 2700 mm Control Operateur X1/X2 axes 600 mm R1/R2 axes 120 mm Z1/Z2 axes 0-2500 mm Ddk38sf total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. 8 m more
1
pressure:40 t distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm Mskwyo table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none used double colum... more
4
operating pressure: 8 bar volume capacity: 25,3 m³/min output: 141 KW Lqzt7 motor capacity: 132 kW revolutions per minute of the motor:: 1550 U/min weight: 4,4 t dimensions L x W x H: L:3,5xB:1,9xH:2,25 m Screw Compressor noise protection sale as is ---> in need of repair copy of documentation available more
5
Pressure gauge, pressure gauge with bourdon tube, pressure-temperature metrology G 1/2 "display up to 4 bar-6x present price per Package Weight 0.6 kg Qltvv0wkx more
1
pressure 6 kN throat 85 mm stroke 25 mm height adjustment 80 mm distance between table / ram 35 - 140 mm ram diameter 8 mm 2zuxsr2f table-size 160 x 100 mm weight 17 kg dimensions of the machine ca. 160 x 220 x 550 mm more


direct press
every day

New machines via email!

Be informed!

to

to

Change search
DIRECT PRESS
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close