Used Studer S 30 for sale (71)

Condition: used, Year of construction: 1988, Swivel-in internal grinding attachment for STUDER RHU and S 30 universal cylindrical grinding machines with oil mist lubrication up to 50,000 rpm. Bodpfxscdi N Io Aglslc Excellent condition!

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Bjdpfx Agsw T Sd Tjljlc Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Bedpfevca Izex Aglolc Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: refurbished (used), Completely overhauled Studer cylindrical grinding machine Centre distance: 650 mm Bledpfxexxy A Ts Agloc Technical data and accessories as per photos and PDF.

Condition: used, Rondslijper centre height 125 mm centre width 650 mm grinding diameter 250 mm grinding wheel diameter 400 mm total power requirement 8 kw weight approx. 2500 kg Dit is een machine van Machines4you Bodpfogfqn Nox Aglslc

Condition: refurbished (used), Year of construction: 2025, Studer S30 Center height: 125 mm center width: 650 mm Workpiece weight: 80 kg Other freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw incl. SPS-Pro (cycle controlled) Blsdpfx Ajd Hdxwjglsc - "Workpiece memory"-SPS-PRO for 10/15/30/50 workpieces - Glass scale in X- and Z-axis - Swiveling internal grinding device - Motor spindle for internal grinding device - Frequency converter external grinding spindle - Frequency converter for internal grinding spindle - Grinding sensor system - Contact protection on external grinding spindle - Safety door - manually operated - Grinding wheel flange - LED spot with flex arm - suitable coolant system

Condition: used, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Distance between centers: 1000mm Center heigh 175mm Grinding Wheel head rotation (B) 360° (1°) 2 ext Grinding Wheels 1 int Grinding Wheel Ext Grinding wheel 400 mm x 40 mm x 127 mm overhauled spindle > see photos Workhead CM 4 0-1000 RPM CNC Fanuc Bljdpowim U Hsfx Agloc Programming: Pictogramming Heidenhain linear encoders This machine can be inspected under power in our warehouse in Gussago BS Italy

Condition: good (used), Year of construction: 1981, operating hours: 16,769 h, Center height 175 , Center width 700 , Angled position of turntable 10° , Workhead swiveling 90° , Speed range 30-675 rpm , Bljdpfstz T H Djx Aglsc Morse 5 , Grinding headstock _ grinding wheel diameter 400 , largest width 50 , drive power 6,25kW

Condition: used, Year of construction: 1988, grinding length: 1,000 mm, grinding diameter: 350 mm, The machine was still in use until recently. Grinding diameter: 350mm Bljdpfx Aswca H Asgloc Grinding length: 1000mm Year of manufacture: 1988 Remarks: - The price does NOT include any accessories! - Pickup by buyer, from the site. - Pickup date will be agreed upon by the seller. - No warranty. - Advance payment (invoice) or cash upon pickup.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Bodpjlbgfcjfx Agljlc Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: used, STUDER S 40-2 is a Cylindrical grinder designed for precision, high accuracy and reliability. Working capacities: centre height 175 mm, distance between centres 650 mm, max longitudinal travel 700 mm; wheels Ø400 mm (width 80/40 mm) bore 127 mm; workpiece max 130 kg; hydraulic cross travel 300 mm; wheelhead swivel 180°; table angle 12°. Main specs: wheel speeds 6 steps 1500–2400 t/min (35 m/s); work spindle stepless 60–600 t/min, rotatable 0–90°; wheel motor 3 kW, work spindle motor 1 kW; 3×400 V 50 Hz; total 13 kVA; weight ≈3100 kg; dims 2150×2000×1800 mm. Accessories: 2‑axis DRO, internal grinding attachment, magnetic chuck Ø150 mm, paper filtration, flanges, lamp, balancing arbor, safety device. Achieves tight tolerances; suited to automotive, aerospace, tooling and medical sectors Blsdpfx Ajx S N D Ajgljc

Condition: used, Year of construction: 1989, Technical details: Blsdjr R Elpspfx Agloc grinding diameter: 300 mm grinding length: 540 mm centre height: 175 mm total power requirement: 20 kVA centre distance: 1000 mm

Condition: used, Year of construction: 1992, Technical details: grinding diameter: 50 mm grinding length: 100 mm Bledpfx Ager R Ek Seljc centre height: 100 mm centre distance: 200 mm

Condition: like new (used), Year of construction: 2010, Machine Type: CNC Cylindrical Grinding Machine Manufacturer: Fritz Studer AG Model: S22 Year of Manufacture: 2010 Control System: FANUC 31i-A CNC Machine Base: Granitan® S103 mineral casting Configuration: Fixed straight wheelhead for external (OD) grinding Automation: Automatic loading system with FANUC robot integration Distance Between Centers: 650 mm (25.6”) Center Height: 175 mm (6.9”) Max. Workpiece Weight: 150 kg (330 lbs) Max. Workpiece Length: 700 mm Max. Workpiece Diameter: 449 mm Grinding Wheel Diameter: 610 mm Grinding Wheel Width: 160 mm Grinding Wheel Speed: Up to 3,200 rpm Spindle Power: 15 kW (20.5 hp) Bedpewl Uvksfx Aglslc Wheelhead Type: Fixed straight X-Axis Travel: 310 mm Z-Axis Travel: 850 mm X-Axis Max. Speed: 15,000 mm/min Z-Axis Max. Speed: 30,000 mm/min C-Axis: Full rotation capability for workhead Programming Interface: StuderWIN with FANUC 31i-A Additional Software: StuderGRIND Automation Interfaces: Standard interfaces for loaders and peripherals Other Equipment: Rotary dresser, Heidenhain scales, various clamping fixtures

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Studer S20 in very good condition with accessories and documentation Blodpfx Aewa Iimsglec

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,500 kg, The machine can be tested under power. Blsdpfx Asw Idwzsglec

Year of construction: 1989, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5117.19, TECHNICAL DETAILS grinding diameter: 450 mm Bjdpfx Agslnkfaololc grinding length: 1600 mm center height: 225 mm control name: Siemens Sinumerik System3 speed: max. 2440 rpm center distance: 1750 mm resolution: 0,001 mm speed: 0,06 - 10000 mm/min cross slide: 180 mm feed rate: 0,01 - 5000 mm/min resolution: 0,0005 mm workpiece weight: max. 500 kg quill travel: 40 mm Straightness of surface line over 650 mm: 0.004 mm Roundness accuracy: 0.0005 mm MACHINE DETAILS Machine weight: approx. 7.3 t total connected load: max. 22 kVA

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm Bledpfxsxlix Do Aglsc MACHINE DETAILS Control: Fanuc 16T

Condition: ready for operation (used), Centre height: 175mm, centre width: 1000mm, max. external grinding diameter: 350mm, max. grinding length: 1000mm, max. workpiece weight: 130kg, grinding wheel dimensions X/Y/Z: 400mm/80mm/127mm. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1700mm, weight: approx. 3300kg, operating hours: approx. 21315h. An on-site inspection is possible. Bedpfx Agow Dfhbslelc

Condition: used, TECHNICAL DETAILS - distance between centers : 1000 [mm] - centers height : 175 [mm] - strokes (Z/X) : 1050 x 275 [mm] - max. feeds (Z/X) : 10 x 5 [m/min] - grinding wheelhead type : 2 external, 1 internal - left external grinding wheel dimension : 500 x 63 x 127 [mm] - right grinding wheel dimension : 400 x 63 x 127 [mm] - grinding wheel motor power : 7,5 [kW] - rotation speed : 1670 - 2110 [Rpm] - grinding wheelhead orientation : -15 to +225 [°] - resolution : 0.001 [°] - workhead tapper : MT5 - workhead rotation speed : 1 - 1027 [Rpm] - workhead power : 0,785 [kW] - tail stock : MT3 - quill stroke : 35 [mm] - weight : 7000 [kg] - hours under power : 47.959 [h] EQUIPMENT - control CNC FANUC 16 TB - programming through Pictogramming - Release B version B275 - deported electronic handwheel - 2 grinding wheels left-right internal at 180 [°] - B axis for indexing of the grinding wheelhead every 0,001 [°] - high precision C axis for part indexing and form Blsdouhbyqjpfx Agljc grinding - tail stock with fine concentricity adjustment - sensitron - upper table swiveling fine adjustment - control pedal - lenght positioning device MARPOSS E32R with sensor T25G - measuring scales HEIDENHAIN on X/Z - coolant tank with pump - 1 grinding wheel holder flange - 1 grinding wheel - 1 dry center - 1 electro-spindle : 40.000 [Rpm] - tail stock hydraulic retract through pedal

Condition: used, TECHNICAL DETAILS - centers height : 100 [mm] - distance between centers : 650 [mm] - length of internal grinding : 100 [mm] - Ø of internal grinding : 3 to 40 [mm] - maximal table orientation : 30 [°] - workhead : * spindle speed (variator) : 60-1200 [Rpm] * motor power : 0.5 [kW] * interior cone : morse 4/2 - wheels sizes : 350 x 30 x 127 [mm] - wheelhead : * power : 3 [kW] * orientation : 15/30 [°] - maxi part weight : 20 [kg] - maxi power required : 5 [kW] WEIGHT & DIMENSIONS Blsdpfx Asuhby Reglsc - Machine floor space : 3000 x 1400 [mm] - Machine height : 1600 [mm] - Machine weight : 1900 [kg] EQUIPMENT - complete internal grinding attachment : 45.000 [rpm] - 1 complete cooling device - 1 counter headstock with fine adjustment - 1 reversible and adjustable trueing device - 1 directional diamond holder - 2 axis X, Y digital display - 1 steady rests 3 points

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, grinding diameter:350 mm grinding length:1000 mm centre height:175 mm workpiece weight:120 kg power capacity:5,5 kW turning speeds:max. 25000 U/min control:FMS 5-88 weight of the machine ca.:3,5 t precision grinding machine with SONY digital display, coolant system, electronic hand wheel, separate electrical cabinet, emergency cut-off Bsdpfxsdmppqs Agljlc

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): Maximum travel approx. 850 mm Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Blodpsxtpnzjfx Agloc Dimensions / Electrical Data Machine weight approx. 8,500 kg Power supply, typically 400 V / 50 Hz (country-specific)

Condition: excellent (used), FANUC 21i-T Control Bjdpfeyabt Dox Agljlc Center Height 175 mm Distance between centers 1000 mm Grinding head B-axis 1° Grinding wheel 500 x 63 x 203 mm Grinding wheel speeds -1'500 rpm Internal grinding attachement 60'000 rpm Work piece spindle head C-axis 0.001 ° Measuring probe Automatic balancing attachement Wheel dresser Misc. accessories MARCELS MASCHINEN AG

Condition: reconditioned (used), functionality: fully functional, center height: 100 mm, workpiece weight (max.): 20 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, distance between centers: 400 mm, year of last overhaul: 2026, CHARACTERISTICS : Centre distance: 400 mm Center height: 100 mm Working feed Z axis: 100 - 3500 mm/min Orientation of table: 0 - 30 ° Grinding spindle motor power: 3 kW Max. diameter grinding wheel: 350 mm Max. grinding wheel width: 30 mm Grinding wheel bore: 127 mm Workpiece spindle nose: W20 Workpiece spindle min. speed: 30 rpm Workpiece spindle max. speed: 1200 rpm Bsdoycim Dspfx Aglolc Max part weight between centres: 20 Kg Workpiece swiveling range: 0 ° / +90 ° Workpiece spindle power: 0.5 kW Type of attachment tailstock: MT2 Tailstock quill stroke: 20 mm Machine dimensions: 2350 x 1480 mm Weight: 1600 Kg