Used Hurco Bmc 30 M for sale (154)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Csdpstrhq Hofx Aktjri Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,676 h, functionality: fully functional, HURCO VMX 30 – CNC Vertical Machining Center with LEHMANN Dividing Table Manufacturer: HURCO Model: VMX 30 Codo Agwx Nspfx Aktori Year of Manufacture: 03/2002 Control System: HURCO Ultimax Machine Type: CNC Vertical Machining Center Technical Data X-axis: 760 mm Y-axis: 510 mm Z-axis: 610 mm Rapid Traverse X/Y/Z: 30/30/20 m/min Table Dimensions: 1,020 × 510 mm T-slots: 5 × 18 mm T-slot spacing: 100 mm Maximum Table Load: approx. 1,000 kg Spindle Speed: up to 10,000 rpm Spindle Drive Power: approx. 11 kW Tool Holder: SK40 Automatic Tool Changer 24 tool positions Tool holder SK40 HURCO Ultimax Dual-screen control system Special equipment CNC-controlled dividing table from LEHMANN Fully integrated into the HURCO control system Control directly via the CNC control system Fully functional Machine Dimensions and Weight Machine Weight: approx. 4,700 kg Machine Height: approx. 2,775 mm Footprint: approx. 3,870 × 4,170 mm including work area Condition and Scope of Delivery The machine is in used condition, commensurate with its year of manufacture, and shows visible signs of wear. Technically, the machine is fully functional. All existing machine functions, as well as the integrated LEHMANN dividing table, are functioning perfectly. The machine is sold including the LEHMANN dividing table. Not included in the scope of delivery: The clamping devices and clamping elements visible in the pictures Tools and tool holders The machine is suitable for single-part production as well as for small and medium-sized series. The machine can be viewed by appointment. The machine is expected to remain powered and available for demonstration until mid-calendar week 46/2026 (approx. November 11, 2026). An inspection and functional test while powered is possible within this period by arrangement. All technical specifications are without guarantee. Subject to prior sale.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw Codpfx Akjw Tdiusteri - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: excellent (used), Year of construction: 2017, Hurco VMX30i vertical machining center Year: 2017 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - With linear scales on all axis, with higher accuracy standard - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling - Software options as per on the pictures Under power in our warehouse. Codpfxjzf Rxfe Aktsri Clamping units, vices, and dust extractor are not the scope of the delivery.

Condition: used, Year of construction: 2019, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min Cjdpfx Akjz I T Rtetori power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2019 / Commissioning May 2020 - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Condition: excellent (used), Year of construction: 2003, control: Ultimax tool taper: SK40 Codpfsitk Ncox Aktjri table size: 1020 x 510 mm travel: x-760, y-510, z-610 mm spindle speed: 10000 rpm 24 fold tool changer internal cooling accessories: 2 hydrl. vices, div. tool holder

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew Crsdsw Nklhopfx Aktji - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: excellent (used), Year of construction: 2011, Winmax control Cjdpfx Ao Adl Rdoktori Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: excellent (used), Year of construction: 2008, operating hours: 7,400 h, functionality: fully functional, Controller WINMAX Singlemax (one screen) Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit Credpe Agag Rofx Aktsi - Chip conveyor - SW options: 3D, pocket islands, rigid tapping, DXF, NCPP, ISNC, select surface, advanced graphics, material and tool databank - machine mounths

Condition: like new (used), Year of construction: 2008, operating hours: 1,780 h, functionality: fully functional, Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit - Chip conveyor - SW options: 3D, pocket islands, rigid tapping, DXF, NCPP, ISNC, select surface, advanced graphics, material and tool databank - machine mounths Credpfx Aksz Elldotsi

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Hurco Winmax 5 Control, Spindle taper DIN40, 30 ATC, Coolant, Low volt light, Swarf Conveyor Crodpez Ha Aysfx Aktsi

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, Crjdpfx Akjzh I Agetji spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2017, HURCO TMM 8 i CNC turning machine with powered tools Year of manufacture: 2017 Spindle operating hours: approx. 4100 h Codpe Ahiu Nsfx Akteri

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg Crjdoy T Ekbspfx Aktei

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Codpez Ahx Dsfx Akteri Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm z-travel 610 mm 1.020 x 510 mm WINMAX 12.000 U/min 13,5 kW 24 St. SK 40 | | Cjdpfx Ajznnc Tektjri 20 bar 35/35/30 m/min 5,0 t used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Crsdpfx Akozylx Ajtsi Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2022, surface area 1321 x 610 mm max. table load 1800 kg travel -x axis 1270 mm travel -y axis 508 mm travel -z axis 508 mm spindle cone SK40 number of spindle speeds 12000 U/min spindle capacity 15 kW spindle torque max. 82 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 21 kW weight of the machine ca. 4,25 t dimensions of the machine ca. 4,1 x 3,35 x 2,6 m the machine is like new!!!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm Crsdpfx Akjza Hqustsi - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Cjdpfx Ajzwhk Ajktjri Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Tool magazine for 24 tools, SK 40 DCF software

Condition: good (used), Year of construction: 2005, Hurco VMX 30, Year of manufacture 2005, Ultimax 4 control system, travel X/Y/Z 780/510/610 mm, 24-position tool changer, SK 40 holder, Table size 1020 x 510 mm, max. table load 1,000 kg, Spindle speed up to 10,000 rpm, spindle drive 11 KW, Cjdpfxou Ib A Uo Aktjri chip tray,

Condition: good (used), Year of construction: 2010, HURCO CNC Machining Center VMX 30 U with WinMax control Travel distances in mm: X-axis 1060 Y-axis 610 Z-axis 520 Integrated rotary and swivel axis: Coolant system Rinsing system to support chip removal Chip splash-guard enclosure Coolant spray gun Signal light for machine operating status Work area machine lamp Set of leveling pads Machine manual on CD includes: WinMax control 2 color screens (text + graphics) 2 software modules (1 x conversational programming at the machine + 1 x for ISO code programming Cedpfexvtf Ajx Aktsri via external programming device or CAD/CAM system through RS-232 C or V 24 interface)

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Credpfoxrcnlex Aktoi

Condition: good (used), Year of construction: 2002, Hurco VMX 30, year of construction 2002, Ultimax 4 control unit, Travel X/Y/Z 760/510/610 mm, table size 1020 x 510 mm, 24-position tool changer, spindle speed up to 10,000 rpm, coolant system, electric handwheel, Pocket milling with islands, synchronous thread cutting, 3D contour software, DXF capable, chip conveyor, Crsdpetud Ncjfx Aktoi

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle speeds : 18000 [rpm] - Spindle power : 25 [kW] LINEAR AXES - Travels on X/Y/Z axes : 760 / 510 / 520 [mm] - Rapid traverses rates (X/Y/Z) : 45 / 45 / 40 [mm/min] A ROTARY AXIS - Travel : -110 / +30 [°] - C ROTARY AXIS - Travel : 360 [°] - Rapid traverse rate : 25 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : Ø248 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 48 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.940 x 4.060 [mm] - Machine height : 2.865 [mm] - Machine weight : 6000 [kg] EQUIPMENT Csdpfx Asy Tzctskteri - CNC : Hurco WinMax / MAX5 - Interactive programming - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. • Operating hours: 12,567 h Credjy Naacepfx Aktei • The machine is equipped with a 30-tool magazine, and it also includes a chip conveyor and tool cooling system. Technical Specification Taper Size SK 40