Hurco bmc 25 for sale
Denkendorf, Germany
![]()
6665 km
1991
repair required (used)
Information without guarantee
Machine will not be repaired because production has been stopped
X8ii9fde
- Machine type: Milling machine
- Control type: CNC
- Serial number: BN 9-001-020
- Machine weight: 4385 kg
- External dimensions: width approx. 2.40 m x height approx. 2.50 m x depth approx. 2.00 m
- Control: Ultimax 2
- Clamping area: 850 x 400 mm
- Table load: 500 kg
- Tool slots: 20
- Tool holder: SK 40
- Engine power: 11 kW
- Spind... more
|
Ultimax 3 Steuerung
20-fach Werkzeugwechsler
Kuehlmitteleinrichtung
Spaenewanne
Elektr. Handrad
Ultimax 3 Control
20-fold ATC
coolant device
chip tank
electric hand wheel
Mxj79
Technische Daten / technical details:
X-Weg / X-travel 610 mm
Y-Weg / Y-travel 410 mm
Z-Weg / Z-travel 560 mm
Spindelaufnahme / spindle taper SK 40
Drehzahlbereich / spindle speed 6000 UpM /rpm
Tisch/table 850x400 mm
Eilgang x, y, z / rapid feed x, y, z 10 m/min
Werkzeugwechselmagazinplaetze / number of tools in changer... more
|
Pfullendorf, Germany
![]()
dealership location
6700 km
1996
good (used)
Weight approx .: 6000 kg Dimensions (LxWxH) approx .: 2700 x 3000 x 2600 mm
7uksjnx0g
Product description: Table dimensions 1215 x 510 mm, 24-fold tool changer, control ULTIMAX 3, with tool receptacles.Spindle speed 30 to 8000 rpm + .Application hours 15700h. more
|
Maitenbeth - Thal/Straßmaier, Germany
![]()
6875 km
2017
good condition (used)
Grundfos pump with pressure 25 bar
Nldrt
Type MTR1-33/33 A-W-HUUV
for example for internal coolant supply on milling spindles, pump was only a short time in use, because the cooling plant was rebuilt. Condition as good as new. (see photo)
Sale plus free shipping or pickup
Voltage: 220-240V / 380-420V. 50/60 HZ
2, 2kw speed 2899 more
|
Pfullendorf, Germany
![]()
6700 km
1996
repair required (used)
Defective tool holder, defective 2x monitors are new, remaining axle control were in operation until the machine was dismantled.German vehicle and Zullasung ... ..The information is indicative. They represent no guaranteed properties. The seller is not liable for tipps u. Data transmission errors subject to prior sale.All information without guarantee .....
Nnzb2 more
|
Manufacturer article no.: BMC SK 40 6 K 130 machining: milling / drilling
Cone: SK 40
RPM: 6000
Rotary feedthrough: no
Lubrication: Grease
Internal cooling: Yes
Bbgrrntn
All information, offers and prices on this page are subject to change and non-binding. more
|
Hurco Machining Center BMC 4020
Built in 1998
Ultimax
Approximately 18,000 operating hours
Condition: good according to age, fully functional,
X-axis 1020mm
Y-axis 510mm
Z-axis 610mm
Weight 6250 kg
300 ltr. Cooling water tank
Rpm3lgrb
Spindle box:
SK 40
Speed range 80-8000 min. more
|
x-travel 1020 mm
y-travel 510 mm
z-travel 610 mm
table surface area 1220 x 510 mm
spindle taper SK 40
spindle turning speed range 80 - 8000 U/min
max. torque on the spindle 222 Nm bei 600 U/min
spindle power 15 kW
table load capacity 682 kg
distance spindle /table 150 - 760 mm
feeds 3 - 11.400 mm/min
rapid motion -longitudinal/cross/vertical 20 / 20 / 14 m/min
ATC 24 Pos
tool diameter max. 100 mm
tool length - max. 305 mm
weight of tools max. 7 kg
total power requirement
weight of the machin... more
|
x-travel: 559 mm
W9cck
y-travel: 356 mm
z-travel: 356 mm
distance spindle center to table: min./max.=102/457 mm
control: Hurco Ultimax 3 Control
spindle speed:: 60 - 6000 U/min
tool taper: SK 40
tool changer with: 16 tools (Magazinteller) places
feed speed: 1 - 3810 mm/min
rapid traverse:: 1 - 10160 mm/min
table-size: 765 x 349 mm
table load: 0,25 t
Number of working hours: 18001 (laut Zähler) h
Total power requirement: 12 kW (15 kVA) kVA
Weight approx.: 3,0 t
dimension machine [...]: 2,8 x 2,15... more
|
|
Hessisch Lichtenau, Germany
![]()
dealership location
6567 km
1991
used
CNC vertical machining center HURCO BMC 40 type
Masch. Nr. BL9-003-011 built CA 1991
CNC railway control Ultimax II
Driveways X: 1000 mm, Y: 760 mm, Z: 560 mm
Table size 1300 x 870 mm
Table load of 1500 kg
ISO 40 spindle adaptor
Distance spindle nose - table 150-710 mm
Throat depth 450 mm
30 to 6000 RPM infinitely variable spindle speed
Spindle drive 11 kW at 30 min / 7,5 kW at 100%
Power supply 400 Volt, 50 Hz
-CNC railway control Ultimax II (Ultimax 2)
-electronic hand wheel
-Indirect measurin... more
|
Tirschenreuth, Germany
![]()
6800 km
1998
good (used)
Travel x-way 760 mm, y-way 460 mm, z-way 610 mmTable surface 1000 x 500 mmTool holder SK 40Spindle speeds - infinitely variable 80 - 8000 rpmSpindle drive 7.5/11.2 kWMachine weight approx. 5 tDimensions L x W x H 2.8 x 2.5 x 2.87 m24-fold Tool changerCNC control ULTIMAX 4Internal coolant supply
Bgnszsu0r8 more
|
x-travel 660 mm
y-travel 355 mm
z-travel 455 mm
table surface area 1120 x 500 mm
tool taper SK 40
spindle turning speed - stepless max. 8000 U/min
spindle motor 7,5/11,2 kW
total power requirement 14 KVA
weight of the machine ca. 4,9 t
dimensions 2,2 x 3,3 x 2,5 m
Cieaojwq
Vertical 3-axis CNC machining center with
- 24-fold tool changer
- new CNC control ULTIMAX 4 installed in 2017.
Machine is in good condition and ready to show. more
|
|
Bad Salzungen/OT Langenfeld, Germany
![]()
6620 km
ready for operation (used)
x-axis = 760 mm
y-axis = 460 mm
z-axis = 610 mm
tool holder type SK 40/BT
control type: Ultimax 3
24 pcs. tool holder
electrical connection: 21 kW, 380 V, 50 Hz
total power consumption: 10.000 KVA
spindle speed: max. rpm
with computer disk
Bfuhs2udd9
size: 2,20 x 3,30 x 2,50 mtr.
weight: approx. 5 tons more
|
Control Ultimax 3
Travels X / Y / Z: 760/460/610 mm
Spindle speed 6,000 min-1
Jvcunq
Tool magazine for 20 tools, SK 40 more
|
HAGUENAU, France
![]()
6560 km
2000
excellent (used)
Lagernummer 1105-02749
Maschinenart Bearbeitungszentrum - Vertikal
Fabrikat HURCO
Typ BMC 4020
Baujahr 2000
Steuerungsart CNC
Lagerort FRANKREICH
Ursprungsland taiwan
Lieferzeit Sofort
Frachtbasis ab Standort
Technische Details
x-Weg 1020 mm
y-Weg 510 mm
z-Weg 610 mm
Arbeitsfläche 1300 x 510 mm
T-Nuten 5 x 18 mm x 700 mm
Motorleistung (30 min. ED) 15 kW
Abstand zwischen Tisch und Spindel 150 - 760 mm
Drehmoment 600 Nm U/min 30 min ED 22
Werkzeugwechsler 30 fach
Steuerung Ul... more
|
Tirschenreuth, Germany
![]()
6800 km
1999
good (used)
Travel x-way 760 mm, y-way 460 mm, z-way 610 mmTable surface 1000 x 500 mmTool holder SK 40Spindle speeds - infinitely variable 80 - 8000 rpmSpindle drive 7.5/11.2 kWMachine weight approx. 5 tDimensions L x W x H 2.8 x 2.5 x 2.87 m24-fold Tool changerCNC control ULTIMAX 4
Bgnszjdu77 more
|
x-travel 760 mm
y-travel 460 mm
z-travel 610 mm
table surface area 1000 x 500 mm
tool taper SK 40
spindle turning speed - stepless 80 - 8000 U/min
spindle motor 7,5/11,2 kW
total power requirement 14 KVA
Oc93xz0j
weight of the machine ca. 4,9 t
dimensions 2,8 x 2,5 x 2,87 m
Vertical 3-axis CNC machining center with
- 24-fold tool changer
- CNC control ULTIMAX 4
- Spindle in 2017 newly stored and balanced
- Spring package new in 2016
- Timing belt new in 2017
- Documentation
Machine is ... more
|
Goldbach, Germany
![]()
6593 km
1989
defective spare-parts repository (used)
Sell defective Hurco BMC 40.all electronics cards (except the graphics card), motors, drive, etc. are functional.buyer must take care of the transport of the equipment itself.here not only the spare parts are sold but complete equipment!price is negotiable!!machine can be inspected at any time on site.
Bfsyg0gxza more
|
There are two identical machines available, x-travel: 750mm, y-travel: 450mm, z-travel: 690mm, number of tool slots: 24, tool cone: SK 40, connected load: 11kW.
Pt2mpy more
|
Machine number: 92001097BB
Machine type: Milling machine
Vertical Machining Center
Make: HURCO
Type: BMC 45M
Built: 1997
Control type: CNC
Country of origin: Germany
Freight base: ex works
Location: 36110 Schlitz-Bernshausen
Delivery time: immediately
Package price with the HURCO BMC 30 VB 20.000,-€ plus VAT
Bfivv9hgsz
x-way: 1320 mm
y-way: 762 mm
z-way: 560 mm
Tool holder: SK 40
Control: Ultimax 3 Control Hurco
Drilling diameter: 40 mm
Thread cutting up to max: 40
Work table: 1700 x 700mm
Tabl... more
|
Hurco BMC 64 / 4 axles, built in 1999, control of Ultimax 4, traverse path X/Y/Z 1625/860 mm / 760 mm, 4 axis, tool changer 24 times, 1876 x 890 mm table size, recording SK 40, spindle speeds up to 8,000 rpm,.
Vspgce more
|
Technical data:
-Control ULTIMAX
-Spindle carrier / support spindle: SK 40
-Tool changer with / tool changer with: 24 stations
-Table size / surface of the table: 1220 x 510 mm
-Procedures: traverse path
-X axis / axis: 1020 mm Y axis / axis: 510 mm Z axis / axis: 610 mm
-Distance spindle nose - table 150-760 mm
-Working feed / working feed: 3-11,400 mm / min
-Spindle speed / speed of the spindle 80-8000 rpm - the spindle diameter / diameter of the spindle: approx. 80 mm
-Electrical equipment /... more
|
x-travel 760 mm
y-travel 460 mm
z-travel 610 mm
table surface area 1000 x 500 mm
tool taper SK 40
spindle turning speed - stepless 80 - 12000 U/min
spindle motor 7,5/11,2 kW
Coovpmgi
total power requirement 14 KVA
weight of the machine ca. 4,9 t
dimensions 2,8 x 2,5 x 2,87 m
Vertical 3-axis CNC machining center with
- 24-fold tool changer
- CNC control ULTIMAX 4
- Spindle re-stored and balanced in 2016
- Documentation
Machine is in good condition and ready to show. more
|
Machine number: BK-9-002-020
Machine type: Milling machine
Vertical Machining Center
Make: HURCO
Type: BMC 30
Built: 1990
Bfivvvwa8y
Control type: CNC
Country of origin: Germany
Freight base: ex works
Location: 36110 Schlitz-Bernshausen
Delivery time: immediately
x-way: 762 mm
y-way: 510 mm
z-way: 510 mm
Tool holder: SK 40
Control: Ultimax 3 Control Hurco
Drilling diameter: 40 mm
Thread cutting up to max: 40
Work table: 1000 x 500mm
Table load: 500 kg 500kg
Number of tools in the magazine: 24 ... more
|
Machining: milling / drilling
Cone: SK 40
RPM: 12000
Rotary feedthrough: no
Lubrication: Grease
Internal cooling: Yes
7el0wmhio
All information, offers and prices on this page are subject to change and non-binding. more
|
Machining: milling / drilling
Cone: SK 40
RPM: 12000
7el0m2bun
Rotary feedthrough: no
Lubrication: Grease
Internal cooling: Yes
All information, offers and prices on this page are subject to change and non-binding. more
|
Make Romicon (filter), Type CTG 3" HF (Hollow Fiber) 21-75 PM-500, New unknown, Material Stainless steel, Filter /Rotary pump (1x), Mounted on wheels , Floor space 1,1x0,7 M, Total height 2,1 M, Weight 200 KG, Extra Specifications - "Sanitary Rotary Pump" make Nakamura Japan, type 25 VT-D Size 1,5 motor 0,75 KW, 220/380 Volt, with frequency inverter What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to an... more
|
Technical data baler
Manufacturer Bollegraaf
Typ HBK 25
Year of construction 1987 / 1996 completely overhauled at the Bollegraaf factory
Press power 25 tons
Feed channel 1,050 x 800 mm (l x w)
Theoretic throughput rate 160 m³/hour
Bale size 900 x 800 mm (w x h)
Driving motor 18,5 kW
Be8u2l7vki
Tying system 4-fold horizontal, fully automatic
Transport dimensions only baler 6,400 x 2,000 x 2,500 mm (l x w x h)
Machine weight baler 7,5 tons
Condition of the baler:
The press is in a good condition... more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
1992
used
|
Babberich, Netherlands
![]()
dealership location
6312 km
1991
ready for operation (used)
COMAC 3055 Profile bender
- Make : COMAC ITALIA - Typ : 3055 HV - YOP : 1991 - Serial : M 1470
- Schaft Ø : 120 mm - Rol Ø : 400 mm - Bending moment : 33 cm³
- Min. bending speed : 2.5 M/Min - Max. bending speed : 7.5 M/Min - Motor power : 15 kW
- Capacity:
- Flatt 125 x 25 x Ø 1300 - Square 80 x 80 x Ø 1000 - I 240 x 106 x Ø 1500 - H 120 x 114 x Ø 2500 - Tube 139 x 5 x Ø 1300
Rxr2ihq
- Length : - Width... more
|
Volume d'injection : 15 cm3
Diamètre de la vis : 25 mm
Volume d'injection : 30 cm3
Pression d'injection : 1000 bars
Course d'injection : 36 mm
Force du vérin d'injection : 4900 dN
Longueur de la vis : 360 mm
Puissance de chauffe : 3,35 kw
Nombre de zones de chauffe régulées : 3
Pression hydraulique maximum : 160 bars
Contenance de la trémie : 10 litres
K9icj7it more
|
Maitenbeth - Thal/Straßmaier, Germany
![]()
6875 km
2008
refurbished (used)
Hurco milling spindle SK 40 mounting speed 15000 rpm spindle is completely overhauled and as good as new, with test report (RS-Tec)stocked goods - immediately available
Bfxm09dqxx more
|
Make Nisshin Engineering Inc. Japan, Type TC-25 M, No TC-0215, New 2003, With filter type CT-1024 (10,8 m2), Material Stainless steel 1.4301 (304), Air seperator "Turbo classifier" (1x), Rotor diameter dia. 290mm, Feeding with metering screw, Motor 3,7 KW, 480 Volt (60 Hz), With control cabine, Extra Specifications - All motors are in 60 Hz execution - With 2 spare rotors , With fan (10 m3/Min, motor 15 KW) What you can expect from Foeth: all our machines are in working condition, and at a reduc... more
|
ModelGE 1200-25Ø s/ bench (mm)1275Pin bore (mm)104Distance between points (mm)4000Ø allowed in the fracture (mm)1600Fragment width (mm)450Ø on transverse (mm)900Bed width (mm)700Slide width (mm)100Speed of spindle rotation (Tpm)24/6-550Power of main motor (CV)25Machine equipped with : Plate 4 jaws Ø 1200 mm /Machine equipped with
Bgooucoe9k more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
Cable protection ring
Type KSR-910 light grey
Qlzjmpwzs
-25 x cable protection rings per package
-15 x packages available
Price per package
Weight 3,6 kg more
|
Hannover, Germany
![]()
6516 km
2011
excellent (used)
Trotec Speedy 100R Co2 Laser with only 2840 hours laser running time and new firmware Engraving area: 610 x 305 mmScope of supply:Trotec Speedy 100R 25 Watt Built 2011Unwinding deviceSoftware Job Control 10.7 incl. license keyHandbookConnecting cableMaterialOn request:SuctionDelivery by forwarding companySpeedy laser engraving machineSpeedy is the perfect choice for your laser engraving device - no matter if you just want to start your business or increase your production capacity. First-class c... more
|
Machine available with: - Refurbished mechanical part - New electrical cabinet - New electrical cabinet - Siemens S71500 control panel - Double acting hydraulic pick-up pos.6 - Independent control pos.1,2,4,5- Geometry and bore for glasses - Machine guaranteed 1 year: including parts and labour - Equipment and tool holders on request - Feel free to contact us for more information.
Crfdelxk more
|
Machining center Hurco VMX 24 with 4th axisUsed machineHurco VMX 24 with Kitagawa RT 250 - year 2002control Ultimax 4TFT monitors and keyboard new,door panes new,CPU and hard disk (SD-card) new software 2.37ebearing in all axes renewedpainting newoptions: Synchron thread, pocket/island, DXF, Ultinet, Helix/ramptravel x-y-z 610-508-610tool magazine 24 places - mounting SK40 spindle 11kw, speed 10000 rpmtool internal cooling 20 barmachine can be inspected under current after appointmentmachine hou... more
|
Make Memmert (DE), Type TV25 S, Material Stainless steel, Drying oven , Max. temperature 220 Gr C, Number of compartments: 1, Capacity 12,5 Ltr, Internal width 360mm, Internal depth 175mm, Internal height 200mm, Electric capacity 960 Watt, Number of doors: 1, With air circulation , With timer , With switch , Floorspace 0,5x0,4 M, Total height 0,5 M, Weight 20 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for s... more
|
CNC Drehmaschine Müga GT2-25 Lathe machine Drehbank
CNC Futterdrehmaschine Müga GT2-25
CNC Drehmaschine
Typ: GT2-25
Jvamli
Model: 2007
Steuerung/Control Unit: Mitsubishi M70
Anzahl NC-Achsen: 2
Kapazitätsbereich Drehlänge: 100 mm
Capacity Grinding length: 100 mm
Drehdurchmesser: 30 mm
Schwingkreis: 360 mm
Eilgang: 17,5 m/min
Kühlmittelbehälter 80L
Linearträger für Werkzeuge: 4 WZ Außenbearbeitung, 3 WZ Innenbearbeitung
Automatische Türöffnung
Fußschalter für Backenfutter
Spannfutter RÖHM K... more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
|
Laboratory extruder: 25 L / D. Spindle: 1, diameter: 20, length: 500 mm, hydraulic motor and hydraulic unit: 5.5 hp with electrical panel.
Nmy7x more
|
cnc fanuc
twin spindles 3500RPM power 15KW
Bfvavermid
2 turret 12 tools
spindle bore 80MM
swing 370X360MM
swarf conveyor
machine weight 11000KGS more
|
Wald, Germany
![]()
6693 km
2008
ready for operation (used)
Oil tank 1000 l with nozzle
Bczchvtng9
Content: hydraulic oil DTE 25 (CA. 350 l)
You can like to come for a visit.
You will receive a regular invoice.
Also a net invoice can be created for foreign customers. Prerequisite is a valid Ust.Indent.Nr.
Subject to prior sale.
Specified trade names, and trademarks are property of their owners and are used only for identification and description of products.
The structure and the electrical connection of the machine / unit, must be carried out by ... more
|
Make Memmert (DE), Type U 25, No 810 500, Material Stainless steel 1.4301 (304), Drying oven , Max. temperature 220 degr.C,, Number of compartments: 1, Capacity 12,5 Ltr, Internal width 360, Internal depth 175mm, Internal height 200mm, Electric capacity 800 Watt, Number of doors: 1, With air circulation , With timer , With switch , Floorspace 0,5x0,4 M, Total height 0,5 M, Weight 20 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to n... more
|
Cleaned, function tested, test run
2x new Festo valve installed
new oiler
pneumatics partly renewed
used,
Run a little, top facilities
Make Ganner
Type Mentor 25
GS tested
GS-tested for wood dust
Spindle number 25 pieces
Spindle distance / grid 32 mm
Drilling from below
Fjuttpnh
swiveling pneumatic
Angle error compensation pneumatic
Comb lowered pneumatically
swivel desk
Tensioner 4 pieces
Hole rows drilling device
Frame fixing device
Digital display
drilling program
suction
Storage location fr... more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
|
The line is dedicated to produce mesh sheets.
F9tepr9gw
Line wire feeding off spools.
Cross wire feeding pre-cut. more
|
|