Used Heller Mc 25 for sale (59)

Condition: used, Year of construction: 2013, HELLER 7 Machines: H 6000 MCH 280 MCH 250 We offer, directly on behalf of the owner, the following machines due to a site relocation: 7 x HELLER 4-axis horizontal machining centers Manufacturer: Heller 1. Type: H 6000 Year of manufacture: 2011 Operating hours: 28,338 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 150 2. Type: H 6000 Year of manufacture: 2009 Operating hours: 33,963 Dcsdpez Ihpwofx Acpjn Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 165 3. Type: H 6000 Year of manufacture: 2013 Operating hours: 26,025 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Defect in spindle / B-axis 4. Type: MCH 280 Year of manufacture: 2011 Operating hours: 44,454 Control: Simumerik 840 D Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Tool positions: 100 5. Type: MCH250 Year of manufacture: 2008 Operating hours: 49,905 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 6. Type: MCH250 Year of manufacture: 2008 Operating hours: 43,820 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 5-position Tool positions: 100 7. Type: MCH250 Year of manufacture: 2007 Operating hours: 58,084 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 The sale is without clamping devices and tool holders. Further details and technical information are available upon request.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2003. It features a robust X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Siemens 840D control unit and a tool magazine with 100 positions. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Tool Holder / Taper: HSK 100Tool Magazine Positions: 100Pallet Changer: IncludedX-Axis Travel: 800 mmY-Axis Travel: 800 mmZ-Axis Travel: 800 mmB-Axis Travel: 360,000 x 0.001°Spindle Speed: 6,000 RPMMeasuring Probe: Blum probeVoltage: 400 V (3~)Frequency: 50 HzRated Current: 123 A Technical Specification Taper Size HSK 100 Dodpfx Aoz Ir Rxjcpocn

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2002. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis travel of 360,000 x 0.001°. The machine is equipped with a Siemens 840D control unit and a tool magazine with 100 positions. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Control Unit: Siemens 840DTool Holder / Taper: HSK 100Tool Magazine Positions: 100Pallet Changer: IncludedX-Axis Travel: 800 mmY-Axis Travel: 800 mmZ-Axis Travel: 800 mmB-Axis Travel: 360,000 x 0.001°Spindle Speed: 6,000 RPMMeasuring Probe: Blum probeVoltage: 400 V (3~)Frequency: 50 HzRated Current: 185 A Technical Specification Taper Size HSK 100 Dsdpfx Ajz Ir Nhscpocn

Condition: ready for operation (used), Year of construction: 2001, This 4-axis HELLER MCH 250 was manufactured in 2001. It features a robust coolant/filter unit, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Dcodez Iyfqepfx Acpsn - Voltage: 400 V (3~)- Frequency: 50 Hz- Nominal Current: 185 A

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Dcedpfjzncnkox Acpen Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Djdpouxdhuofx Acpecn

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Dcsdpfsy H D T Uox Acpjn Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Technical Specification Dcsdpsy Epfvofx Acpon Taper Size BT 50

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment. Djdsx Hn D Repfx Acpscn

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 52, number of axes: 4, This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details. • Automatic tool changer (ATC): 52 tools Additional equipment • Twin pallet changer Dedpfx Acjy Ef D Eopjcn Technical Specification Taper Size SK 50

Condition: used, Year of construction: 1999, machine/vehicle number: 31-43414, Heller MC16 No. 31-43514, Year of Manufacture: 1999 Spindle Speed (rpm): 45-16000 SK40 Travel paths (mm): X 630 / Y 630 / Z 630 Rapid traverse speed (mm/min): 1-40000 Number of tools: 80 Tool diameter (mm): 70/150 (with free adjacent slots) Tool length (mm): 320 Number of pallets: 2 Pallet dimensions (mm): 400 x 500 Dcjdpfjwffd Ssx Acpsn Max. pallet load (kg): 500 B axis: NC Control: Sinumerik 840D Heidenhain measuring probe: Yes Power (kVA): 60 Machine No. 64 ATL iTM400HP No. 14916, Year: 2009 Power (kVA): 30 Deburring chamber: Standard 400 / 400 mm Max. gas filling pressure: 20 bar Siemens Multipanel with Windows CE operating system

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. - Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN (centered)- Rotary Table Max Tangential Torque: 10,000 Nm (clamped)- Rotary Table Max Tilting Moment: 8,000 Nm (clamped)- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Magazine Capacity: 80 tool pockets, 1 insertion pocket- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Measuring System: Direct in X, Y, Z axes- Positioning Tolerance: 0.007 mm- Optional Equipment / Features: Hydraulic workpiece clamping, central cooling unit for motor spindle and cabinet, probe with IR receiver, chip conveyor, tool coding, manual workpiece setup station (rotatable 4x90°), drill breakage control, prepared for emulsion mist extraction- Included Components: Without clamping device, without machine pallet Djdez Dh Dtspfx Acpocn Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1999, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm control: Unipro 90 Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Dcsdoy Rmk Repfx Acpjn Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor *

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Dcedpjzdpvgefx Acpsn Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm Dodpfx Acszb R I Tjpocn 2-fold pallet changer Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Dcsdpfx Ajx D I Alscpsn • Control: Siemens Sinumerik 840D • Tool magazine: 160 • Tool holder type: HSK-63A

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840C, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and is equipped with a tool magazine that holds 40 tools. The machine also includes a twin pallet system for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet (2-station pallet changer) Dcedpfx Asy H D Rmocpsn Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2002, x-travel 630 mm y-travel 630 mm z-travel 630 mm Control Siemens type 840 D size of pallet 400x500 mm numbers of pallets 4 360 ° turning speeds 10-16000 U/min Tool changer 160 Pos. spindle taper: HSK 63 total power requirement 55 kW weight of the machine ca. 11 t Machine with Siemens 840 D control for 4 axes - Digital drive technology, direct position measuring systems - 4-position pallet changer - Full B-axis - Coolant system with internal coolant supply Dsdoyqt Axspfx Acpjcn - Hydraulic workpiece clamping - Filtration system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 50 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details. - Machine Count: 2 units- B-Axis (NC Rotary Table) Resolution / Indexing: 360,000 x 0.001 deg- B-Axis (NC Rotary Table) Speed: 25 rpm- B-Axis Indexing Accuracy Tp (VDI/DGQ 3441 / ISO 230 At): 8 arcsec- B-Axis Max. Tangential Moment: 12,000 Nm- B-Axis Max. Tilting Moment: 18,000 Nm- Voltage / Frequency: 3~ 400 V / 50 Hz- Nominal Current: 65 A- Short Circuit Current Rating: 9 kA- Feed Force X- and Y-Axis (ED S3 -40%): 15,000 N- Feed Force Z-Axis (ED S3 -40%): 20,000 N- Rapid Traverse (POWER Package X/Y/Z): 50 m/min- Acceleration (POWER Package X/Y/Z): 5 m/s²- Rapid Traverse (SPEED Package X/Y/Z): 65 / 65 / 72 m/min- Acceleration (SPEED Package X/Y/Z): 7 / 7 / 11 m/s²- Linear Axis Positioning Tolerance (Tp): 0.005 mm- Tool Taper: HSK-A 100 / SK 50- Speed Range: 5 - 8,000 rpm (Power Cutting 100 G / Power Cutting enforced 100 G) / 5 - 6,000 rpm (High Power Cutting 100 G) / 5 - 13,000 rpm (Speed Cutting 100 i) / 5 - 10,000 rpm (Power Cutting 100 i) / 5 - 12,000 rpm (Dynamic Cutting 100 i)- Drive Power (ED S6-40%): 43 kW / 45 kW / 60 kW- Max. Torque (ED S6-40%): 228 Nm / 360 Nm / 400 Nm / 822 Nm / 1,146 Nm / 2,292 Nm- Front Bearing Spindle Diameter: 100 mm / 110 mm- Max. Permissible Tool Mass: 25 kg (8 kg if every location occupied, 35 kg option)- Tool Chain Magazine Slots: 50 / 100 / 150- Tool Rack Magazine Slots: 265 / 425- Max. Tool Length: 600 mm- Max. Tool Diameter: 112 mm (all locations occupied) / 280 mm (with free locations)- Pallet Dimensions: 630 x 630 mm- Max. Workpiece Diameter: 900 mm- Max. Workpiece Height: 1,000 mm- Max. Clamping Mass (Pallet 1): 1,000 kg (single-sided) / 1,400 kg (double-sided)- Pallet Change Time (without hydraulic clamping): 13 s- Pallet Change Time (with hydraulic clamping): 13.5 s- Coolant System Option PBF: Paper band filter Interlit TMF 600, 40 µm nominal fineness, 1,800 L tank capacity, 50 bar / 70 bar high-pressure coolant (IKZ) option- Coolant System Option VRF: Backwash filter KNOLL VRF 250, 40 µm nominal fineness, 1,200 L tank capacity, 50 bar / 70 bar high-pressure coolant (IKZ) option- Machine Floor Footprint (L x W x H with coolant & conveyor): 7.30 x 3.38 x 3.90 m- Total Operating Power (Machine without coolant system): approx. 37 kVA- Compressed Air Supply Pressure: 5 - 6 bar- Permissible Ambient Temperature: 10 - 45 °C- Material Processed: Aluminum (exclusively)- Estimated Operating Hours: approx. 12,000–15,000 hours (pending confirmation)- Operational Status: Currently installed/in place and powered on Technical Specification Taper Size HSK 100 Dcodpfxoz Ixt Ho Acpjn

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle has been completely overhauled! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Tool holder: SK 63 Max. tool diameter: 150 mm Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Rapid traverse X/Y/Z: 60,000 mm/min Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Dcsdpfxezwd Hte Acpsn Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm Dcjdstqqk Nepfx Acpsn grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and an automatic tool changer with 40 positions. The machine is equipped with twin pallets and offers an XYZ travel of 630 x 630 x 630 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. • Pallet system: Twin pallet Technical Specification Djdpfjy Ef Idox Acpocn Taper Size SK 40

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 8000 rpm Travel paths X: 1000 mm Y: 1200 mm Z: 1100 mm Pallet size: 630 x 630 mm Dedpjy Nybgofx Acpecn Rotary table: 360,000° x 0.001° Tool magazine positions: 400 Interface: HSK 100

Condition: used, Year of construction: 2002, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm pallet size:: 400 x 500 mm spindle taper:: HSK 63 spindle turning speed - stepless: 10 - 16000 U/min total power requirement: 55 kW weight of the machine ca.: 11 t Machine with SIEMENS 840 D control for 4 axis - digital drives Djdpfx Acjvgmiyepecn - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping *

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm b-axis: 360.000 x 0.001 ° main spindle speeds:: 45-10000 1/min weight of the machine ca.: 14 t dimensions of the machine ca.: 7 x 2.45 x 3.4 m size of pallet: 320 x 320 mm number of spindles: 2 tool taper: HSK63 tool numbers: 2 x 40 spindle drive motor: 25/36 (100% / 40% ED) kW Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Dcedsw Ng D Hepfx Acpjn Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *