Used Heller Bea 1 for sale (71)

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER Hfedpfj Dvlxex Abrjc AUTOFEED 8 PALLETS 140 TOOL ISO50

Condition: ready for operation (used), Year of construction: 1998, Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible. Hfsdpfxoxmkb Ns Abroc

Condition: used, Year of construction: 2002, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm pallet size:: 400 x 500 mm spindle taper:: HSK 63 spindle turning speed - stepless: 10 - 16000 U/min Hodsvgmiyepfx Abrjfc total power requirement: 55 kW weight of the machine ca.: 11 t Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping *

Condition: used, Year of construction: 1999, Heller MV16 103 Serial number: 32-44069 Year of manufacture: 1999 Spindle speed: 45–16,000 rpm SK40 X-axis: 630 mm Y-axis: 630 mm Hjdoydi H Topfx Abrsfc Z-axis: 630 mm Number of tools: 80 Tool diameter: 70/150 mm (with free adjacent positions) Tool length: 320 mm Number of pallets: 2 Pallet dimensions: 400x500 mm Maximum pallet load: 500 kg B axis: NC Tool length measurement: Yes Control: Sinumerik 840D Probe: Heidenhain

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Hsdpfx Aew Ng D Hobrsfc Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: used, Year of construction: 1999, machine/vehicle number: 31-43487, Heller MC16 – Year of manufacture: 1999 Spindle speed (rpm): 45-16,000 SK40 Travel range (mm): X – 630, Y – 630, Z – 630 Rapid traverse (mm/min): 1-40,000 Number of tools: 80 Tool diameter (mm): 70/150 (with adjacent free tool stations) Tool length (mm): 320 Number of pallets: 2 Pallet dimensions (mm): 400 x 500 Max. pallet load (kg): 500 B axis: NC Control: Sinumerik 840D Heidenhain probe: Yes Hfsdpfx Aowfd Eujbrsc Power (kVA): 60 Machine no.: 63

Condition: used, Year of construction: 1999, machine/vehicle number: 31-43414, Heller MC16 No. 31-43514, Year of Manufacture: 1999 Spindle Speed (rpm): 45-16000 SK40 Travel paths (mm): X 630 / Y 630 / Z 630 Rapid traverse speed (mm/min): 1-40000 Number of tools: 80 Tool diameter (mm): 70/150 (with free adjacent slots) Tool length (mm): 320 Number of pallets: 2 Pallet dimensions (mm): 400 x 500 Max. pallet load (kg): 500 B axis: NC Control: Sinumerik 840D Heidenhain measuring probe: Yes Power (kVA): 60 Machine No. 64 ATL iTM400HP No. 14916, Year: 2009 Hsdpfx Abswffd Ssrofc Power (kVA): 30 Deburring chamber: Standard 400 / 400 mm Max. gas filling pressure: 20 bar Siemens Multipanel with Windows CE operating system

Condition: used, Year of construction: 2005, functionality: fully functional, HSK63 X 630 Y 630 Z 630 Traverse speed mm/min 1-40000 Number of tools 354 Tool diameter mm 70/150 (with adjacent stations free) Tool length mm 320 Number of pallets 2 Pallet dimensions 400x500 Max. pallet load KG 500 B axis NC Hsdpfx Abeyc Nc Esrofc Control Sinumerik 840D Tool breakage control Yes Measuring probe Heidenhain Yes Power kVA 69

Condition: ready for operation (used), Heller PLT 90 uni-Pro CNC 90 control panel SN:00214 - without key, used, good condition, 100% working, scope of delivery as per photos Hjdpstyr Avsfx Abrofc

Condition: new, Gebr. Heller uni-Pro DIGI-Drive E3 23.020212 X VPS 30A-N12, unused, in sealed original packaging, 100% functional Hedpfx Asi D U Sfebrjfc

Condition: new, Heller CPU91 E93 H 23 Uni Pro PLC 90 < unused > 100% functional Hedsi Ea E Hjpfx Abrefc

Condition: new, Heller uniPro SIO B 23.032298X-02813 CNC card < unused > in sealed OVP 100 % functional Hedpfji Ea Hkex Abrefc

Condition: new, Heller uniPro SYS90-F CNC card C 23.020206X-00711 < unused > in sealed OVP 100 % functional Hfsdpfx Aei Ea Hrjbrec

Condition: ready for operation (used), Heller CPU91 CNC G 23 Uni Pro CNC 90 Board used 100 % functional Hfedpfxei Ea E As Abrjc

Condition: ready for operation (used), Year of construction: 1999, Main Drive Spindle speed range 10000 Number of axis 4 Tools Number of index 160 Type of tool holder HSK-63A Hedpfex D I Aljx Abrofc This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Main Drive Hfedpsx D Iz Uofx Abrec Spindle speed range 16000 Tool taper HSK-63A Tools Number of index 120 This HELLER MC 16 with pallet pool was manufactured in 1999. It features a Control Uni Pro system, a 120-tool magazine, and an HSK-63A tool holder. The spindle operates at a speed of 16,000 rpm. Consider the opportunity to buy this HELLER MC 16 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm Hjdpfoxy S Aujx Abrefc 2-fold pallet changer Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Hfodpfx Abswgm Hkjrjc Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: used, Year of construction: 2019, operating hours: 17,349 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,349 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21/C22 axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Hjdpjwgnfujfx Abrofc Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: excellent (used), CV saws grinder Heller model SA315 Hfedpfx Abextbtcersc

Year of construction: 1985, condition: used, largest surface to be machined: 400 x 300 mm speed of the knife spindle infinitely variable: 1600 - 6000 rpm Hsdsb Nxdvspfx Abrjfc electrical connection: three-phase current 380 V space requirement: 900 x 800 x 600 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Working Area Working envelope (X/Y/Z): 450 × 450 × 450 mm Maximum workpiece height: 700 mm Pallet size: 320 × 320 mm Maximum pallet/table load: 300 kg Spindle Number of spindles: 2 Tool spindle: 10,000 rpm, 95 Nm Speed extension: 18,000 rpm Tool interface: HSK 63 Feed Acceleration: 10 m/s² Rapid traverse: 60 m/min Chip-to-chip time: 2.6 s Tool Magazine Tool positions: 2 × 60 Tool magazine with 60 positions: included MACHINE DETAILS Weight Machine weight: approx. 14 t Control Control system: Siemens Sinumerik 840D EQUIPMENT Double-spindle, 4-axis horizontal machining center 4 machine pallets Renishaw probe Infrared receiver for probe, Renishaw model Vaf72a0p Operator panel at workpiece setup station Operator panel at tool setup station Workpiece setup stations manually rotatable Hydraulic workpiece clamping, 60 bar Pneumatic support control at workpiece setup stations Automatic swing door Extended coolant supply 70 bar / 1,500 l VF 250 coolant chiller Work area flushing Emulsion mist extraction Roto-Clear Automatic setup sequence Automatic teardown sequence Run-time and quantity recording Hfjdpfewx Er Njx Abrsc Status lamp, 3 colors Modem for remote diagnostics Control cabinet lighting

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Hfjdpfourkypox Abroc Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. Hsdpfxot Hwrho Abrefc * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: good (used), Year of construction: 2004, Technical details shown in pdf document. Hfedpfxoruq N Io Abroc