Used Haffner Kf 20 for sale (35)

Condition: used, Used machine Equipment and technical data: Lift left/right: 150 mm, Lift up/down: 150 mm Motor: 1.5 kW Dsdoyklfxjpfx Anwjcg with chain Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1980, Used machine Condition: various small defects without chains Dodpfew I U Nhox Anwocg Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Dcodpfx Anjvwgayswsg

Condition: excellent (used), functionality: fully functional, Chain Mortiser/Chain Chisel KF20, with several chains, very good condition, 1.7 kW, 380 Volt. Machine subject to differential taxation. Dodjxf Hzijpfx Anwecg

Condition: used, Year of construction: 1938, Machine cleaned, function tested, trial run incl. various chain sets Used, good condition, low hours Manufacturer: Haffner Type: KF20 Year of manufacture: 1978 Machine no.: 20378 Column-type machine + undercarriage Chain set 12-17 / 50 x 175 J3 Door support Space requirement approx. 750 x 800 x 2000 mm Dcedpjythcfsfx Anwjg Weight approx. 200 kg Location: 97447 Gerolzhofen, free on truck, unpacked Delivery as seen, without any warranty or guarantee

Condition: good (used), Technical Specifications: Motor: 1.5 kW Three-phase voltage: 220/380 V / 50 Hz Speed: 2800 rpm Max. mortising depth: 150 mm Max. slot length: approx. 170 mm Max. chain width: 40 mm Max. longitudinal table travel: 160 mm Max. transverse table travel: 90 mm Incline: 5 degrees Weight, machine: 72 kg Weight, stand: 35 kg Approx. dimensions: (HxWxL): 190 x 54 x 60 cm Dcodewm Dlkepfx Anwsg

Condition: used, used manufactured by Haffner type KF20 wall machine workpiece rest lubricant unit Dedsvwf T Eepfx Anwscg total connected power 1,5 kW located in  97447 Gerolzhofen sale in current condition as seen. Without repair work. Pickup in the short term. - free on truck -

Condition: good (used), Type KF-30 In good condition Manual Motor 1,7 kW Dcsdpfedrq Svox Anwog Tiltable Chain width 18 mm Made in Denmark Transport dimensions 700х700х1800 mm

Condition: good (used), Router, router, hand router -Handover: in current condition as seen -Accessories: collet, but without clamping nut, depth stop Dcodpfx Anjb A N Nmewsg -Speed: 12000 rpm -Rated consumption: 800 watts -Connection: 230 volts -Dimensions: 320/320/H320 mm -Weight: 12kg

Condition: good (used), functionality: fully functional, Door lock milling machine SL 100 - with milling motors for faceplate and handle - with pneumatic clamps - 1.7 kW Djdpfjygm Awox Anwocg Transport available at extra cost!

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee Dsdpjyuty Sofx Anwjcg

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Djdpfx Anouiwqhjwecg Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: good (used), Year of construction: 1989, HAFFNER 919 Power Feeder with 6 Rollers and 8 Speeds Number of rollers: 6 pcs Roller dimensions: 110x50x35 mm Number of speeds: 8 Description HAFFNER power feeder 6 rollers 8 speeds Reach approximately 800 mm Location: ex stock 54634 Bitburg - Immediately available - Dcedpfxjyza A Ue Anwsg Subject to prior sale

Condition: excellent (used), 1.1 kW motor Two pneumatic clamps Djdpsy Avgxsfx Anwecg

Condition: excellent (used), Motor 1.3 kW x2. 45-degree angles. Cutting height 11 cm. Cutting width 15 cm. Cutting length 340 cm. Pneumatic. Dedoy Af Tuspfx Anwscg

Condition: excellent (used), Model: SL 100 Required space approx. 1200 mm x 800 mm x 2000 mm Weight approx. 300 kg Dedpfjyz U Ulex Anwjcg

Condition: used, Year of construction: 1980, Used machine Year of manufacture: 1980 Dcedsyq T Ibjpfx Anweg Features and technical data: - Lock case milling unit - Handle hole borer - Face plate milling cutter - 1.5 kW motor - 2800 rpm Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1980, functionality: fully functional, power: 4 kW (5.44 HP), cutting height (max.): 80 mm, saw blade diameter: 300 mm, total width: 5,750 mm, total height: 2,160 mm, The Haffner panel saw model SP 223 is still fully operational and in use. It is a vertical panel saw machine. Technical data (saw blade): For the SP 223 model, a saw blade with a diameter of 300 mm and a 30 mm bore is recommended. Dimensions: L = 5750 mm, H = 2160 mm. Cutting depth: 80 mm. Motor power: 4 kW, 5.5 HP. Dedpfx Aoywh R Esnwscg

Condition: used, used, in good condition with new feed rollers, 6 rollers manufacturer Haffner type 919 machine no. 32728 motor: pole-changing, 2 speeds, 1.1 / 1.5 kW roller diameter 110 mm roller width 50 mm feed rollers: 6 pcs with stand Dodpsyt R N Iofx Anwocg 8 speeds, 4 switchable location: 97447 Gerolzhofen, loaded free on truck, unpacked delivery in as-is condition, as inspected and tested, no overhaul, no warranty or guarantee

Condition: used, Year of construction: 2000, functionality: unexamined, input voltage: 400 V, type of input current: three-phase, saw blade diameter: 500 mm, rotational speed (max.): 2,850 rpm, rotational speed (min.): 2,850 rpm, air pressure: 6 bar, pressure: 6 bar, saw blade speed: 2,850 rpm, We are offering this used Haffner DGS 187 double mitre saw, year 2000, including 2 new saw blades. Type: DGS 187 Serial number: 0103 Dcedpoyn U Azjfx Anweg Voltage: 400 V Frequency: 50 Hz Current: 20 A Operating pressure: 6 bar Air consumption per cycle: 8.0 l Max. saw blade Ø: 500 mm Speed: 2850 rpm If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale Dedpfstv Rgrsx Anwscg * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg Dcsdpeku Hrrsfx Anwjg

Year of construction: 2008, condition: used, For aluminum and PVC profiles Max. milling diameter: 180 x 30 mm Max. Profilhöhe: 95 mm Dcsdpfjx Nm Imsx Anwjg Hub: 325 mm Pneumatic material clamps Manual feed minimum quantity spraying Weight: approx. 150 kg

Condition: used, Used machine Equipment and technical specifications: Lock case milling unit Lever hole drill Mortise milling cutter Including accessories Motor 1.7 kW 2800 rpm Dsdswhuk Tjpfx Anwscg Location: Mainz Availability: Short term

Condition: used, Door lock milling machineused, good conditionmake Haffnertype SL 100machineNo. 2269upright machinechain setdoor supportworkpiece supportpusher hole motorforend motorlubricatorsuction connection D 80/100 mmspace requirement approx. 1200 mm x 700 mm x 2000 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Dedpfjvwfmfsx Anwocg